Solaris (synchrotron)

• PIRX (previously XAS) is a bending magnet based beamline dedicated to microscopy and spectroscopy in the soft X-rays energy range. The beamline is designed to study chemical and electronic, structural and magnetic properties by means of XAS, XNLD (X-ray natural linear dichroism) and XMCD (X-ray magnetic circular dichroism), XMLD (X-ray magnetic linear dichroism), respectively. It is suitable for probing element specific properties of surfaces, interfaces, thin films and nanomaterials. The available photon energy range (200–2000 eV) covers the absorption K edges for light elements, from carbon to silicon, L edges of elements with Z between 20 and 40, including 3d elements, and also M edges of many heavier atoms, including 4f elements. The offered experimental station is a universal station for X-ray absorption spectroscopy (XAS).

The station is available for user's experiments in different sample environments and focusing conditions. Users can apply for beamtime with the XAS end station. In order to prepare for their experiment, users are asked to look at the end stations' webpages.

• URANOS (previously UARPES) - Ultra angle-resolved photoemission spectroscopy beamline allows for measurements of fundamental quantities, i.e. the energy and the momentum, describing a photoelectron state in the space outside the solid sample.

If a spin selector is used additionally, a complete set of quantum numbers for the electron may be obtained. Then, within a so-called sudden approximation, the electron energy, momentum and spin measured over the sample surface may be related, to binding energy, quasimomentum, and spin, that the electron had in the solid before the photoelectric event took place. Thus the electronic band structure of the studied solid is obtained experimentally. Beside this simple picture ARPES gives also detailed insights into complex electron – electron and electron – lattice interactions in the solid.

The importance of the ARPES technique for contemporary science and technology is widely recognized. Dedicated ARPES beamlines exist at almost all synchrotron radiation centers worldwide.

Applications: Many recent advances in materials science have been enabled by better understanding of the electronic structure of complex systems, gained due to ARPES studies. Examples include advances in fields such as: high temperature superconductivity, topological insulators, graphene physics.

• PHELIX - the beamline is using soft X-rays produced by an APPLE II undulator with permanent magnets. This undulator allows to obtain variable polarization of light - linear, circular and elliptical. The beamline enables spectroscopic absorption studies. The available research techniques on the beamline are: photoemission spectroscopy (PES) and XAS. Application: in the study of new materials (spintronics, magnetoelectronics, topological insulators) as well as thin layers and multilayers.
• DEMETER - (Dual Microscopy and Electron Spectroscopy Beamline) - the beamline is using soft X-rays with variable polarization emitted by an EPU (elliptically polarizing undulator) undulator. The beamline has two end stations: STXM scanning X-ray transmission microscope and PEEM photoemission electron microscope. Application: magnetic order research, domain structure research, imaging of chemical composition and spectroscopy of biomolecules.

• ASTRA (previously SOLABS)  - an X-ray absorption spectroscopy beamline, whose synchrotron light source will be a bending magnet. The line will deliver photons within a broad energy range, allowing measurements to be conducted at the absorption edges of many elements.

Applications: The endstation will be intended for materials research of both a basic and applied nature.

• SOLCRYS - a wiggler-based, high energy X-ray beamline (up to 25 keV) for structural studies. Applications: in structural studies (biological, macromolecular, pharmaceutical, crystalline materials, etc.) also performed under extreme conditions (high pressure, temperature).
• CIRI (previously SOLAIR) - the beamline of infrared absorption microscopy with imaging. The source of radiation is a curving magnet. The beamline will have two end stations: a microscope with infrared radiation with Fourier transform and a microscope for nano-infrared spectroscopy coupled with atomic force microscopy and scanning near-field microscopy (AFM-SNOM-FTIR imaging). Application: in biomedicine, nanotechnology, environmental sciences and many other fields. The planned research will allow, among other things, to direct the synthesis of potential drugs and their design.
• POLYX - a beamline which will enable high-resolution multi-modal imaging in the hard X-ray range. The source of radiation is a curving magnet. Techniques available will be: X-ray fluorescence microanalysis (micro-XRF), X-ray absorption threshold spectroscopy (micro-XAFS) and computed micro-tomography (micro-CT). Application: testing new solutions for X-ray optics and detectors, testing low-absorbing samples, e.g. biological materials, obtaining depth information about elemental decomposition, morphological studies of objects, three-dimensional imaging of the local atomic structure, etc.

SOLARIS synchrotron scheme with working beamlines 2023