South Australian Railways T class

The South Australian Railways T class was a class of 4-8-0 steam locomotives operated by the South Australian Railways. Several were sold to the Tasmanian Government Railways; some others operated on the Commonwealth Railways.

South Australian Railways T class
T251 at Jamestown in 1967
Type and origin
Power typeSteam
BuilderIslington Railway Workshops
James Martin & Co
Walkers Limited
Build date1903–1917
Total produced78
Specifications
Configuration:
  Whyte4-8-0
Gauge1067 mm (3 ft 6 in)
Leading dia.2 ft 6 in (762 mm)
Driver dia.3 ft 7 in (1092 mm)
Length52 ft 11 in (16.129 m)
Height11 ft 7+14 in (3.537 m)
Total weight78 long tons 8 cwt (175,600 lb or 79.7 t)
Fuel typeCoal
Fuel capacity8 long tons 0 cwt (17,900 lb or 8.1 t)
Water cap.2,500 imp gal
(11,000 L; 3,000 US gal)
Firebox:
  Firegrate area
109 sq ft (10.1 m2)
Boiler pressure185 psi (1,276 kPa)
Heating surface939 sq ft (87.2 m2)
Superheater:
  Heating area136 sq ft (12.6 m2)
Cylinders2 outside
Cylinder size16.5 in × 22 in
(419 mm × 559 mm)
Valve gearStephenson
Valve typePiston
Performance figures
Tractive effort21,904 lbf (97.43 kN)
Factor of adh.3.54
Career
OperatorsSouth Australian Railways and Tasmanian Government Railways
ClassT and Tx
Number in class78
NumbersT23–T24, T44–T48, T50-T51, T180-T186, T197–T258
First run13 February 1903
Last run1970
PreservedT181, T186, T199, T224, T251, T253
Disposition6 preserved, 72 scrapped

History

Between 1903 and 1917, the South Australian Railways (SAR) placed 78 T class locomotives into service. They were built by Islington Railway Workshops (4), James Martin & Co, Gawler (34) and Walkers Limited, Maryborough (40). They were initially deployed to work on the narrow-gauge lines between Cockburn (on the Broken Hill line), and between Terowie, Peterborough and Port Pirie. Later, they operated across the SAR narrow-gauge network, including on the isolated Port Lincoln Division.[1][2]

The T class were versatile: although designed for freight and ore traffic, the class was also used on so-called "express" passenger services, including the East-West passenger service connecting with the Trans-Australian via Quorn until 1937, and on mixed (combined passenger and freight) services and shunting.[3]:4-93

For more than 50 years the T class the backbone of the SAR's narrow-gauge motive power. As smaller SAR narrow-gauge locomotives were withdrawn in the 1920s, the T class became dominant until the early 1950s, when they were gradually superseded by the 400 class Garratt locomotives on the Barrier ore traffic and, in the 1960s, by 830 class diesel-electrics. The need to convert the latter locomotives from narrow to standard gauge in readiness for the opening of the new Broken Hill line resulted in many of the steam locomotives being released from storage to haul ore trains in 1968–69.[3]:4-91

Design and modifications

The T class's three main configurations over time

During their life, T class locomotives were improved with additional equipment, resulting in dramatic visual changes from the original, well-proportioned locomotive with clean lines to a form that appeared much larger and more purposeful if not slightly eccentric.[3]:4-91 The locomotives' features were based on the successful but smaller Y class. Although designed and first built at the SAR's Islington Works, their styling reflected the strong influence of Beyer, Peacock and Company, the British designers and builders of the railway's earlier narrow-gauge classes. They had steel plate frames, Stephenson valve gear between them, piston valves, and two outside cylinders. The front section of the footplate was inclined, enabling it to clear the inclined cylinders. The locomotive itself adopted a somewhat British appearance with its clean parallel Belpaire boiler, ornate copper-topped chimney, inclined cylinders and a single large steam dome. Later on, its appearance became more utilitarian. Equipment was fitted to the top of the boiler and footplate, the chimneys were replaced with a plain "stovepipe" version, and the pilots (cowcatchers), originally made from tubes, were replaced with steel plate versions. The additional equipment included headlamp, Westinghouse air brake pump, snifter valve, blowdown muffler, air compressor exhaust muffler, re-railing jacks, larger sandboxes, and eight lead adhesion blocks (weights fitted to the footplates). The smokebox was extended in two stages to, first, accommodate a superheater header and, later, a front-end cyclone spark arrestor. All but two T class locomotives received the final extension, giving them a characteristically ungainly, "front-heavy" appearance. The greatly increased height of the extended tender sides and fuel oil tank that towered over the cab produced an appearance distinctly different from the original version.[3]:4-92

Deployment to other railways

In 1969, the year before narrow-gauge traffic ended in the Mid North, T class locomotive no. 185 was hauling grain vehicles on the Wilmington railway line
Cab of T class loco no. 186, operated by the Pichi Richi Railway

In 1920–21, six were sold to the Tasmanian Government Railways, retaining their T class classification. All were withdrawn between 1957 and 1961.[2][4][5]

In 1922–23, five were converted at Islington Works from 1067 mm (3 ft 6 in) to 1600 mm (5 ft 3 in) gauge to run on the lightly laid Murraylands branch lines out of Tailem Bend; they were reclassified as the Tx class. In 1949 all were converted back to narrow gauge. Between 1925 and 1939 all remaining 78 locomotives were upgraded to superheated boilers.[2][5]

During the Second World War, four T class locomotives were sold to the Commonwealth Railways and reclassified as the NMA class. However, the agreement was almost immediately reversed in favour of hiring 32 T class locomotives to operate from Terowie and Quorn to Alice Springs on the Central Australia Railway. Commonwealth Railways employees crewed the locomotives and the SAR undertook servicing and maintenance. Hiring continued post-war for the clean-up of military equipment and removal of wartime infrastructure on the Alice Springs line. T class locomotives were also hired for the Leigh Creek coal traffic until the completion of the Port Augusta to Brachina section of the Marree standard gauge line in 1956.[3]:4-96

For some time after 1954, the T class locomotives were regularly scheduled to double-head The Ghan northbound from Quorn complemented by a single NSU class diesel-electric locomotive. This operation extended as far as Telford, where the T class was detached and returned on a double-headed Leigh Creek coal train, usually with another T class. In 1956, a new standard-gauge line to Telford opened and the narrow-gauge line was severed, extending only as far as Hawker. Leigh Creek coal and other traffic was thereafter transported over the standard gauge. After January 1961, the Commonwealth Railways hired T class locomotives to operate over the 66 kilometres (41 miles) Quorn-to-Hawker route – an arrangement that continued until the last revenue movement on the line in January 1970.[3]:4-98 At the same time the last were withdrawn from the Broken Hill line when it was converted to standard gauge.[6]

Preserved locomotives

As of 2022, six T class locomotives were preserved – of which four were on static display, T186 was under overhaul and T251 was operational:

Number Owner Status Location
T181Sulphide Street Railway and Historical MuseumStatic display outdoorsBroken Hill, NSW [7]
T186Pichi Richi RailwayUnder overhaul for eventual return to operationQuorn, SA[8][9]
T199District Council of PeterboroughStatic display indoors Steamtown Heritage Rail Centre, Peterborough, SA[10]
T224National Trust of South AustraliaStatic display under coverMillicent Museum, SA[11][12]
T251Bellarine RailwayOperationalQueenscliff, Victoria[13]
T253History Trust of South AustraliaStatic display indoorsNational Railway Museum, Port Adelaide, SA[14][15]

References

  1. Turner, Jim (1997). Australian Steam Locomotives 1896-1958. Kenthurst: Kangaroo Press. p. 41. ISBN 086417778X.
  2. Oberg, Leon (2010). Locomotives of Australia 1850s-2010. Dural: Rosenberg Publishing. pp. 124–126. ISBN 9781921719011.
  3. Wilson, John (2006). "The South Australian T class 4-8-0s". Proceedings of the 2006 Convention. Modelling the Railways of South Australia. Adelaide.
  4. "T Class 4-8-0 Locomotive" Australian Model Railway Magazine December 1982 page 117
  5. "Steam Locomotives of the Tasmanian Government Railways and its constituents" Australian Railway History issue 917 March 2014 page 11
  6. "Locomotive T253". National Railway Museum, Port Adelaide. 2022. Retrieved 13 October 2022.
  7. "T181". Australian Steam. (Publisher not named). 2022. Retrieved 12 October 2022.
  8. "T186". Australian Steam. (Publisher not named). 2015. Retrieved 27 September 2022.
  9. "South Australian Railways T class locomotives". Pichi Richi Railway. 2022. Retrieved 12 October 2022.
  10. "T224". Australian Steam. (Publisher not named). 2014. Retrieved 27 September 2022.
  11. "Millicent Museum". Millicent Museum. National Trust of South Australia. 2022. Retrieved 12 October 2022.
  12. "T224". Australian Steam. (Publisher not named). 2014. Retrieved 27 September 2022.
  13. "T251". Australian Steam. (Publisher not named). 2014. Retrieved 27 September 2022.
  14. "Locomotive T253". National Railway Museum. 2022. Retrieved 12 October 2022.
  15. "T253". Australian Steam. (Publisher not named). 2014. Retrieved 27 September 2022.

Additional reading

  • Evans, John (2012). T199: Celebration of a Centenarian. Elizabeth, SA: Railmac Publications. ISBN 9781864770872.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.