Swansea and Mumbles Railway

There was no road link between Swansea and Oystermouth at the beginning of the nineteenth century and the original purpose of the railway was to transport coal, iron ore and limestone. Construction seems to have been completed in 1806 and operations began without formal ceremony, using horse-drawn vehicles. As constructed, the line ran from the Brewery Bank adjacent to the Swansea Canal in Swansea, around the wide sweep of Swansea Bay to a terminus at Castle Hill (near the present-day Clements Quarry) in the tiny isolated fishing village of Oystermouth (known as Mumbles). There was also a branch from Blackpill which ran up the Clyne valley for nearly a mile to Ynys Gate which was intended to promote the development of the valley's coal reserves.

Horse-drawn tram on the Swansea and Mumbles Railway, 1897

In February 1807, approval was given to carry passengers along the line, when one of the original proprietors, Benjamin French, offered to pay the company the sum of twenty pounds in lieu of tolls for the right to do so for twelve months from the following quarter day, 25 March 1807. This is usually cited as the date when the first regular service carrying passengers between Swansea and Oystermouth began, thus giving the railway the claim of being the first passenger railway in the world. Passenger services operated from The Mount, the world's first recorded railway station.[2] The venture was evidently a success because the following year French joined with two others in offering the increased sum of twenty five pounds to continue the arrangement for a further year, but the construction of a turnpike road parallel to the railway in the mid-1820s robbed it of much of its traffic and the passenger service (by that time in the hands of one Simon Llewelyn) ceased in 1826 or 1827, ironically just as events elsewhere in the United Kingdom (particularly in the north east of England) were paving the way for the development of railways as a truly national and international transport system for both goods and passengers.

In its early days the line operated in the same manner as the contemporary canals and turnpike roads. Tolls and charges were laid down in the enabling Act of Parliament and any trader could use the line on provision of a suitable waggon and after paying the appropriate toll to the owning Company. The railway was laid in the form of a plateway, with the rails being approximately 4 ft (1,219 mm) apart.[3]

After cessation of the passenger service the line became derelict and the original company of proprietors virtually moribund. The Clyne valley branch was relaid in 1841/2 and extended for a further mile (as a private line) to the Rhydydefaid colliery where George Byng Morris, the son of one of the original proprietors, had started to exploit the coal and iron reserves of the valley. From about 1855, George Byng Morris took the line in hand, relaid it with edge rails (i.e. as a conventional railway) to the standard gauge of 4 ft 8+1⁄2 in (1,435 mm) and reintroduced a horse-drawn passenger service between Swansea and a terminus at The Dunns in Oystermouth.

Steam power first replaced the horses in 1877 when trials were undertaken with one of Henry Hughes's patent tramway locomotives, aptly named Pioneer. These were adjudged to be a success, and two further locomotives of the same type were obtained, although a dispute between the Swansea Improvements & Tramways Company (which owned the locomotives) and the line's then owner, John Dickson (who had come into possession following the death of George Byng Morris) meant that horses continued to operate certain services until 1896. At this time there was a junction between the Mumbles Railway and the Swansea town tramway system at the Slip, allowing S.I. & T. cars to run through from Swansea town centre to Oystermouth. The nature of the dispute was such that the Swansea & Mumbles company demanded that the S.I. & T. horse cars should follow their own steam-hauled services on the line. In 1889, a new company, the Mumbles Railway & Pier Company, was incorporated to extend the railway beyond Oystermouth to a new pier close to Mumbles Head. The first section, to Southend, was opened in 1893 and the remainder, including the pier, in 1898.

The Clyne valley branch continued to be used for coal traffic from Rhydydefaid pit until its closure in 1885 after which the entire branch fell into disuse. In 1896 the promoters of the Gower Light Railway proposed incorporating it into their scheme but nothing came of it. The original branch to Ynys Gate (as authorised in 1804) was relaid in connection with the Clyne Valley slant (opened 1903) and used for coal traffic until the colliery closed in 1915. The extension of 1841/2 remained abandoned until 1920 when a narrow-gauge tramway was laid on its formation to carry coal from Ynys slant to Ynys Gate. This was used only until 1921 when the slant closed. There was then no further traffic on the branch, although the track remained in situ and was still usable as late as 1936 when it is recorded that a diesel locomotive made a trip up the branch as far as Ynys Gate.

A somewhat motley collection of steam locomotives was used to maintain services between 1877 and 1929, beginning with the Hughes tramway locomotives mentioned above (which were actually owned by the S.I. & T. and therefore not able to be used on the railway after 1878). Dickson had purchased two saddle tank locomotives of more conventional outline from the Falcon Engine & Car Works (successor to Hughes's Locomotive and Tramway Engine Works), and two more from Manning Wardle & Co of Leeds in the early 1880s. A further locomotive (originally numbered 5, later 3) came from the Hunslet Engine Company of Leeds in 1885. When the new Swansea & Mumbles Railway Company took over operations in 1890 it ordered two 0-4-0 saddle tank locomotives from Black, Hawthorn & Co of Gateshead. These were delivered in 1891 and numbered 1 and 2; they worked on the line until after the First World War. Two larger 0-6-0 side tank locomotives were obtained from the Hunslet Engine Company in 1898; numbered 4 and 5, they bore the brunt of the passenger service until well into the 1920s. The nominally independent Mumbles Railway & Pier Co. ordered a 0-4-0 saddle tank from the Brush Electrical Engineering Co of Loughborough (successor to the Falcon Engine & Car Works) in 1906 and this carried plates reading "MR & P No. 3" to denote its ownership. Finally, a second-hand Avonside 0-6-0ST was obtained and named Swansea. All were tank locomotives of 0-4-0 or 0-6-0 wheel arrangement. Ownership was vested variously in the Swansea & Mumbles Railway Company or the Mumbles Railway & Pier Company (and sometimes transferred between the two for accounting purposes)[4] and as early as the 1890s there is evidence that the railway was having to hire in locomotives to supplement its own fleet. By the 1920s, locomotives were regularly being hired from a local dealer, Charles Williams of Morriston, and frequently appear in photographs of the railway taken at that time.

The line celebrated its centenary in 1904, producing a special commemorative brochure for the occasion. Two years previously, a notable experiment had been carried out, namely the introduction of battery-powered 'accumulator' cars. These were not a success, but one of the cars was retained after the electrical equipment had been stripped out and used to convey parties of visiting dignitaries, including King Edward VII when he and his consort, Queen Alexandra, visited Swansea for the ceremonial cutting of the first sod of the King's Dock in July 1904. The car was used again for the visit of King Edward's successor, King George V, in 1920, when he officiated at the opening of the Queen's Dock.

The line was electrified in 1928 at 650 V DC[5] using overhead transmission – giving it the distinction of having used three forms of regular locomotive power over the years (i.e. horse, steam and electricity). Trials began on 6 July 1928[5] and full electric services were introduced on 2 March 1929, using a fleet of eleven double-deck cars built by the Brush Electrical Engineering Co of Loughborough, in Leicestershire. These were the largest ever built for service in Britain and each could seat 106 passengers.[6] Furthermore, they were frequently operated in pairs, giving a total seating capacity of 212 per train.

Two further cars were added later, bringing the fleet strength up to thirteen. A four-wheeled petrol-mechanical locomotive was acquired from Hardy Railmotors of Slough, then in Buckinghamshire, to handle the residual goods traffic on the railway, but this proved to be underpowered and was replaced after a few years by a diesel-mechanical locomotive from John Fowler & Co, of Leeds. The Hardy locomotive was retained for a few years and used for shunting the cars in the depot, which was on the site of the former carriage sheds, adjacent to the Rutland Street terminus, and for inspection of the overhead line equipment, but it had been dismantled by 1954, when parts were used in the construction of a replica horse-drawn car to celebrate the line's 150th anniversary.

In 1958, The South Wales Transport Company (the principal operator of motor bus services in the Swansea town area and predecessor of the modern-day First Cymru company) purchased the railway from the old owning companies (the Swansea & Mumbles Railway Limited and the Mumbles Railway & Pier Company), having previously been the lessee in succession to the Swansea Improvements & Tramways Company since the 1930s, and the following year went to Parliament with an Abandonment Bill. Despite vociferous local opposition, the Bill became law as the South Wales Transport Act 1959.