TE10

TE10 (Russian: ТЭ10) is a Soviet diesel-electric locomotive. The name of this locomotive (ТЭ10) is from тепловоз с электрической передачей, тип 10, which translates to "diesel-electric locomotive type 10."

TE10 (ТЭ10)
2TE10M-2849
Type and origin
Power typeDiesel-electric
BuilderLuhanskteplovoz and Malyshev Factory
Build date2ТЭ10 (ТЭ12): 1960—1963


2ТЭ10Л: 1961—1977
2ТЭ10В: 1975—1981
2ТЭ10М: 1981—present
2ТЭ10МК: 1981
2ТЭ10Г: 1988
2ТЭ10С: 1988
2ТЭ10У: 1989—present
2ТЭ10УТ: 1989—1997


2ТЭ10УП: 1991
Total produced2ТЭ10 (ТЭ12): 19


2ТЭ10Л: 3,192
2ТЭ10В: 1,898
2ТЭ10М: 2,444
2ТЭ10МК: 20
2ТЭ10Г: 2
2ТЭ10С: 3
2ТЭ10У: 549—555
2ТЭ10УТ: 99


2ТЭ10УП: 1-2
Specifications
Configuration:
  AARC-C
  UICCo-Co
Gauge1,520 mm (4 ft 11+2732 in) Russian gauge
Fuel typeDiesel
Fuel capacityTE10-001 -> 5,500 kg (12,100 lb)
Prime moverKharkiv 10D100
Engine typeTwo-stroke diesel
Performance figures
Maximum speed2ТЭ10Л, 2ТЭ10М 100 km/h (62 mph)
2ТЭ10У 120 km/h (75 mph)
Power output1,830 kW (2,450 hp) - 2,040 kW (2,740 hp)
based on modifications
Career
NicknamesChervontsi, Nautilus, Tens
LocaleSoviet Union
Russia
Ukraine
Belarus
Latvia

History

In 1957–1961, the Kharkiv plant "Electrotyazhmash" and Malyshev Factory designed a new single-unit locomotive with 50% more power than a single TE3 unit and only a slightly greater mass. The result was the TEP10 and TEP10L designs. After 1961, work on the freight version of the design was assigned to the Lugansk works. These designs received the suffix "L" to the name to signify the transfer.

The first locomotive of the new design, designated TE10-001 (Kharkiv), was released in November 1958.

Only small numbers of the TEP variant were produced before the design became a dedicated freight locomotive, while a passenger version was not further developed.

Engines

Initial prototypes used the 12-cylinder 9D100 opposed piston two-stroke diesel engine to achieve the required power levels.

This was based on the Kharkiv 10-cylinder 2D100 two-stroke diesel unit. However problems were encountered and another variant of the 2D100 was used, the 10D100, another 10 cylinder two-stroke diesel design. All derivatives of the TE10 locomotive built as new used this engine.[1]

Body

One of the innovations in Soviet locomotive factories was semi-monocoque construction - the principle of whole body supporting structure (what the US would call a carbody structure). This had previously been used only by the Czechoslovakian CHS1 electric locomotives and the Riga ER1 electric train. The body of the locomotive was based on two three-axle trucks like the TE3 predecessor.

With much less weight than the two-unit locomotive TE3, a single TE10 diesel locomotive could successfully replace a pair of TE3s.

Derivative designs

This single unit design formed the basis for a family of locomotives that was built for over 30 years and ranged from single unit passenger locomotives TEP10 through two and three unit freight locomotives 2TE10 3TE10 to four unit very heavy freight 4TE10U engines.[2]

See also

References

  1. Soviet Railways Today - J H Westwood 1963
  2. Soviet Locomotive Types - A J Heywood & I D C Button 1995
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.