Tolga Church

During the 1660s, a copper smelting building was built in the village of Tolga. The village grew up quickly around this smelter. In 1688, a church was built in the village. Prior to the new church, people of Tolga had to travel to the nearby Vingelen Church. The new Tolga church was a wooden building that measured about 11.3 by 7.5 metres (37 ft × 25 ft). From 1703 to 1705, the building was improved by adding a tower, altarpiece, pulpit, and baptismal font. In 1712, a new sacristy was constructed.[3][4]

In 1814, this church served as an election church (Norwegian: valgkirke).[5][6] Together with more than 300 other parish churches across Norway, it was a polling station for elections to the 1814 Norwegian Constituent Assembly which wrote the Constitution of Norway. This was Norway's first national elections. Each church parish was a constituency that elected people called "electors" who later met together in each county to elect the representatives for the assembly that was to meet in Eidsvoll later that year.[5][7]

By the 1830s, the church had become too small for the congregation, so plans were made to build a new church on the same site. Rasmus Svendsen Aspaas was hired to design the new building and John Eriksen Berg was hired as the lead builder. The new wooden church had an octagonal design with a central tower above the nave. It has a second and third floor seating gallery, meaning the church could seat about 300 people. The church was consecrated on 15 November 1840.[3] The church was the last church in Norway to be built with a pulpit altar (Norwegian: prekestolalter) which was a pulpit built above the altar as part of the altarpiece. There is also another pulpit on the ground level. This was a popular design in the 18th and 19th centuries, but it fell out of fashion around the year 1840.[8] There was a major restoration of the church in 1962–1965, where the goal was to bring the church more back to its original character.[4]

• List of churches in Hamar