JavaScript syntax
The syntax of JavaScript is the set of rules that define a correctly structured JavaScript program.
The examples below make use of the log function of the console object present in most browsers for standard text output.
The JavaScript standard library lacks an official standard text output function (with the exception of document.write). Given that JavaScript is mainly used for client-side scripting within modern web browsers, and that almost all Web browsers provide the alert function, alert can also be used, but is not commonly used.
Origins
Brendan Eich summarized the ancestry of the syntax in the first paragraph of the JavaScript 1.1 specification[1][2] as follows:
JavaScript borrows most of its syntax from Java, but also inherits from Awk and Perl, with some indirect influence from Self in its object prototype system.
Basics
Case sensitivity
JavaScript is case sensitive. It is common to start the name of a constructor with a capitalised letter, and the name of a function or variable with a lower-case letter.
Example:
var a = 5;
console.log(a); // 5
console.log(A); // throws a ReferenceError: A is not defined
Whitespace and semicolons
Unlike in C, whitespace in JavaScript source can directly impact semantics. Semicolons end statements in JavaScript. Because of automatic semicolon insertion (ASI), some statements that are well formed when a newline is parsed will be considered complete, as if a semicolon were inserted just prior to the newline. Some authorities advise supplying statement-terminating semicolons explicitly, because it may lessen unintended effects of the automatic semicolon insertion.[3]
There are two issues: five tokens can either begin a statement or be the extension of a complete statement; and five restricted productions, where line breaks are not allowed in certain positions, potentially yielding incorrect parsing.
The five problematic tokens are the open parenthesis "(", open bracket "[", slash "/", plus "+", and minus "-". Of these, the open parenthesis is common in the immediately invoked function expression pattern, and open bracket occurs sometimes, while others are quite rare. An example:
a = b + c
(d + e).foo()
// Treated as:
// a = b + c(d + e).foo();
with the suggestion that the preceding statement be terminated with a semicolon.
Some suggest instead the use of leading semicolons on lines starting with '(' or '[', so the line is not accidentally joined with the previous one. This is known as a defensive semicolon, and is particularly recommended, because code may otherwise become ambiguous when it is rearranged. For example:
a = b + c
;(d + e).foo()
// Treated as:
// a = b + c;
// (d + e).foo();
Initial semicolons are also sometimes used at the start of JavaScript libraries, in case they are appended to another library that omits a trailing semicolon, as this can result in ambiguity of the initial statement.
The five restricted productions are return, throw, break, continue, and post-increment/decrement. In all cases, inserting semicolons does not fix the problem, but makes the parsed syntax clear, making the error easier to detect. return and throw take an optional value, while break and continue take an optional label. In all cases, the advice is to keep the value or label on the same line as the statement. This most often shows up in the return statement, where one might return a large object literal, which might be accidentally placed starting on a new line. For post-increment/decrement, there is potential ambiguity with pre-increment/decrement, and again it is recommended to simply keep these on the same line.
return
a + b;
// Returns undefined. Treated as:
// return;
// a + b;
// Should be written as:
// return a + b;
Variables
Variables in standard JavaScript have no type attached, so any value (each value has a type) can be stored in any variable. Starting with ES6, the 6th version of the language, variables could be declared with var for function scoped variables, and let or const which are for block level variables. Before ES6, variables could only be declared with a var statement. Values assigned to variables declared with const cannot be changed, but its properties can. var should no longer be used since let and const are supported by modern browsers.[4] A variable's identifier must start with a letter, underscore (_), or dollar sign ($), while subsequent characters can also be digits (0-9). JavaScript is case sensitive, so the uppercase characters "A" through "Z" are different from the lowercase characters "a" through "z".
Starting with JavaScript 1.5, ISO 8859-1 or Unicode letters (or \uXXXX Unicode escape sequences) can be used in identifiers.[5] In certain JavaScript implementations, the at sign (@) can be used in an identifier, but this is contrary to the specifications and not supported in newer implementations.
Scoping and hoisting
Variables declared with var are lexically scoped at a function level, while ones with let or const have a block level scope. Since declarations are processed before any code is executed, a variable can be assigned to and used prior to being declared in the code.[6] This is referred to as hoisting, and it is equivalent to variables being forward declared at the top of the function or block.[7]
With var, let, and const statements, only the declaration is hoisted; assignments are not hoisted. Thus a var x = 1 statement in the middle of the function is equivalent to a var x declaration statement at the top of the function, and an x = 1 assignment statement at that point in the middle of the function. This means that values cannot be accessed before they are declared; forward reference is not possible. With var a variable's value is undefined until it is initialized. Variables declared with let or const cannot be accessed until they have been initialized, so referencing such variables before will cause an error.
Function declarations, which declare a variable and assign a function to it, are similar to variable statements, but in addition to hoisting the declaration, they also hoist the assignment – as if the entire statement appeared at the top of the containing function – and thus forward reference is also possible: the location of a function statement within an enclosing function is irrelevant. This is different from a function expression being assigned to a variable in a var, let, or const statement.
So, for example,
var func = function() { .. } // declaration is hoisted only
function func() { .. } // declaration and assignment are hoisted
Block scoping can be produced by wrapping the entire block in a function and then executing it – this is known as the immediately-invoked function expression pattern – or by declaring the variable using the let keyword.
Declaration and assignment
Variables declared outside a scope are global. If a variable is declared in a higher scope, it can be accessed by child scopes.
When JavaScript tries to resolve an identifier, it looks in the local scope. If this identifier is not found, it looks in the next outer scope, and so on along the scope chain until it reaches the global scope where global variables reside. If it is still not found, JavaScript will raise a ReferenceError exception.
When assigning an identifier, JavaScript goes through exactly the same process to retrieve this identifier, except that if it is not found in the global scope, it will create the "variable" in the scope where it was created.[8] As a consequence, a variable never declared will be global, if assigned. Declaring a variable (with the keyword var) in the global scope (i.e. outside of any function body (or block in the case of let/const)), assigning a never declared identifier or adding a property to the global object (usually window) will also create a new global variable.
Note that JavaScript's strict mode forbids the assignment of an undeclared variable, which avoids global namespace pollution.
Examples
Here are some examples of variable declarations and scope:
var x1 = 0; // A global variable, because it is not in any function
let x2 = 0; // Also global, this time because it is not in any block
function f() {
var z = 'foxes', r = 'birds'; // 2 local variables
m = 'fish'; // global, because it wasn't declared anywhere before
function child() {
var r = 'monkeys'; // This variable is local and does not affect the "birds" r of the parent function.
z = 'penguins'; // Closure: Child function is able to access the variables of the parent function.
}
twenty = 20; // This variable is declared on the next line, but usable anywhere in the function, even before, as here
var twenty;
child();
return x1 + x2; // We can use x1 and x2 here, because they are global
}
f();
console.log(z); // This line will raise a ReferenceError exception, because the value of z is no longer available
for (let i = 0; i < 10; i++) console.log(i);
console.log(i); // throws a ReferenceError: i is not defined
for (const i = 0; i < 10; i++) console.log(i); // throws a TypeError: Assignment to constant variable
for (const i of [1,2,3]) console.log(i); //will not raise an exception. i is not reassigned but recreated in every iteration
const pi; // throws a SyntaxError: Missing initializer in const declaration
Primitive data types
The JavaScript language provides six primitive data types:
- Undefined
- Number
- BigInt
- String
- Boolean
- Symbol
Some of the primitive data types also provide a set of named values that represent the extents of the type boundaries. These named values are described within the appropriate sections below.
Undefined
The value of "undefined" is assigned to all uninitialized variables, and is also returned when checking for object properties that do not exist. In a Boolean context, the undefined value is considered a false value.
Note: undefined is considered a genuine primitive type. Unless explicitly converted, the undefined value may behave unexpectedly in comparison to other types that evaluate to false in a logical context.
let test; // variable declared, but not defined, ...
// ... set to value of undefined
const testObj = {};
console.log(test); // test variable exists, but value not ...
// ... defined, displays undefined
console.log(testObj.myProp); // testObj exists, property does not, ...
// ... displays undefined
console.log(undefined == null); // unenforced type during check, displays true
console.log(undefined === null); // enforce type during check, displays false
Note: There is no built-in language literal for undefined. Thus (x === undefined) is not a foolproof way to check whether a variable is undefined, because in versions before ECMAScript 5, it is legal for someone to write var undefined = "I'm defined now";. A more robust approach is to compare using (typeof x === 'undefined').
Functions like this won't work as expected:
function isUndefined(x) { let u; return x === u; } // like this...
function isUndefined(x) { return x === void 0; } // ... or that second one
function isUndefined(x) { return (typeof x) === "undefined"; } // ... or that third one
Here, calling isUndefined(my_var) raises a ReferenceError if my_var is an unknown identifier, whereas typeof my_var === 'undefined' doesn't.
Number
Numbers are represented in binary as IEEE 754 floating point doubles. Although this format provides an accuracy of nearly 16 significant digits, it cannot always exactly represent real numbers, including fractions.
This becomes an issue when comparing or formatting numbers. For example:
console.log(0.2 + 0.1 === 0.3); // displays false
console.log(0.94 - 0.01); // displays 0.9299999999999999
As a result, a routine such as the toFixed() method should be used to round numbers whenever they are formatted for output.
Numbers may be specified in any of these notations:
345; // an "integer", although there is only one numeric type in JavaScript
34.5; // a floating-point number
3.45e2; // another floating-point, equivalent to 345
0b1011; // a binary integer equal to 11
0o377; // an octal integer equal to 255
0xFF; // a hexadecimal integer equal to 255, digits represented by the ...
// ... letters A-F may be upper or lowercase
There's also a numeric separator, _ (the underscore), introduced in ES2021:
// Note: Wikipedia syntax doesn't support numeric separators yet
1_000_000_000; // Used with big numbers
1_000_000.5; // Support with decimals
1_000e1_000; // Support with exponents
// Support with binary, octals and hex
0b0000_0000_0101_1011;
0o0001_3520_0237_1327;
0xFFFF_FFFF_FFFF_FFFE;
// But you can't use them next to a non-digit number part, or at the start or end
_12; // Variable is not defined (the underscore makes it a variable identifier)
12_; // Syntax error (cannot be at the end of numbers)
12_.0; // Syntax error (doesn't make sense to put a separator next to the decimal point)
12._0; // Syntax error
12e_6; // Syntax error (next to "e", a non-digit. Doesn't make sense to put a separator at the start)
1000____0000; // Syntax error (next to "_", a non-digit. Only 1 separator at a time is allowed
The extents +∞, −∞ and NaN (Not a Number) of the number type may be obtained by two program expressions:
Infinity; // positive infinity (negative obtained with -Infinity for instance)
NaN; // The Not-A-Number value, also returned as a failure in ...
// ... string-to-number conversions
Infinity and NaN are numbers:
typeof Infinity; // returns "number"
typeof NaN; // returns "number"
These three special values correspond and behave as the IEEE-754 describes them.
The Number constructor (used as a function), or a unary + or -, may be used to perform explicit numeric conversion:
const myString = "123.456";
const myNumber1 = Number(myString);
const myNumber2 = +myString;
When used as a constructor, a numeric wrapper object is created (though it is of little use):
const myNumericWrapper = new Number(123.456);
However, NaN is not equal to itself:
const nan = NaN;
console.log(NaN == NaN); // false
console.log(NaN === NaN); // false
console.log(NaN !== NaN); // true
console.log(nan !== nan); // true
// You can use the isNaN methods to check for NaN
console.log(isNaN("converted to NaN")); // true
console.log(isNaN(NaN)); // true
console.log(Number.isNaN("not converted")); // false
console.log(Number.isNaN(NaN)); // true
BigInt
BigInts can be used for arbitrarily large integers. Especially whole numbers larger than 253 - 1, which is the largest number JavaScript can reliably represent with the Number primitive and represented by the Number.MAX_SAFE_INTEGER constant.
When dividing BigInts, the results are truncated.
String
A string in JavaScript is a sequence of characters. In JavaScript, strings can be created directly (as literals) by placing the series of characters between double (") or single (') quotes. Such strings must be written on a single line, but may include escaped newline characters (such as \n). The JavaScript standard allows the backquote character (`, a.k.a. grave accent or backtick) to quote multiline literal strings, but this is supported only on certain browsers as of 2016: Firefox and Chrome, but not Internet Explorer 11.[9]
const greeting = "Hello, World!";
const anotherGreeting = 'Greetings, people of Earth.';
Individual characters within a string can be accessed using the charAt method (provided by String.prototype). This is the preferred way when accessing individual characters within a string, because it also works in non-modern browsers:
const h = greeting.charAt(0);
In modern browsers, individual characters within a string can be accessed (as strings with only a single character) through the same notation as arrays:
const h = greeting[0];
However, JavaScript strings are immutable:
greeting[0] = "H"; // Fails.
Applying the equality operator ("==") to two strings returns true, if the strings have the same contents, which means: of the same length and containing the same sequence of characters (case is significant for alphabets). Thus:
const x = "World";
const compare1 = ("Hello, " + x == "Hello, World"); // Here compare1 contains true.
const compare2 = ("Hello, " + x == "hello, World"); // Here compare2 contains ...
// ... false since the ...
// ... first characters ...
// ... of both operands ...
// ... are not of the same case.
Quotes of the same type cannot be nested unless they are escaped.
let x = '"Hello, World!" he said.'; // Just fine.
x = ""Hello, World!" he said."; // Not good.
x = "\"Hello, World!\" he said."; // Works by escaping " with \"
The String constructor creates a string object (an object wrapping a string):
const greeting = new String("Hello, World!");
These objects have a valueOf method returning the primitive string wrapped within them:
const s = new String("Hello !");
typeof s; // Is 'object'.
typeof s.valueOf(); // Is 'string'.
Equality between two String objects does not behave as with string primitives:
const s1 = new String("Hello !");
const s2 = new String("Hello !");
s1 == s2; // Is false, because they are two distinct objects.
s1.valueOf() == s2.valueOf(); // Is true.
Boolean
JavaScript provides a Boolean data type with true and false literals. The typeof operator returns the string "boolean" for these primitive types. When used in a logical context, 0, -0, null, NaN, undefined, and the empty string ("") evaluate as false due to automatic type conversion. All other values (the complement of the previous list) evaluate as true, including the strings "0", "false" and any object.
Type conversion
Automatic type coercion by the equality comparison operators (== and !=) can be avoided by using the type checked comparison operators (=== and !==).
When type conversion is required, JavaScript converts Boolean, Number, String, or Object operands as follows:[10]
- Number and String
- The string is converted to a number value. JavaScript attempts to convert the string numeric literal to a Number type value. First, a mathematical value is derived from the string numeric literal. Next, this value is rounded to nearest Number type value.
- Boolean
- If one of the operands is a Boolean, the Boolean operand is converted to 1 if it is true, or to 0 if it is false.
- Object
- If an object is compared with a number or string, JavaScript attempts to return the default value for the object. An object is converted to a primitive String or Number value, using the .valueOf() or .toString() methods of the object. If this fails, a runtime error is generated.
Douglas Crockford advocates the terms "truthy" and "falsy" to describe how values of various types behave when evaluated in a logical context, especially in regard to edge cases.[11]
The binary logical operators returned a Boolean value in early versions of JavaScript, but now they return one of the operands instead. The left–operand is returned, if it can be evaluated as : false, in the case of conjunction: (a && b), or true, in the case of disjunction: (a || b); otherwise the right–operand is returned. Automatic type coercion by the comparison operators may differ for cases of mixed Boolean and number-compatible operands (including strings that can be evaluated as a number, or objects that can be evaluated as such a string), because the Boolean operand will be compared as a numeric value. This may be unexpected. An expression can be explicitly cast to a Boolean primitive by doubling the logical negation operator: (!!), using the Boolean() function, or using the conditional operator: (c ? t : f).
// Automatic type coercion
console.log(true == 2 ); // false... true → 1 !== 2 ← 2
console.log(false == 2 ); // false... false → 0 !== 2 ← 2
console.log(true == 1 ); // true.... true → 1 === 1 ← 1
console.log(false == 0 ); // true.... false → 0 === 0 ← 0
console.log(true == "2"); // false... true → 1 !== 2 ← "2"
console.log(false == "2"); // false... false → 0 !== 2 ← "2"
console.log(true == "1"); // true.... true → 1 === 1 ← "1"
console.log(false == "0"); // true.... false → 0 === 0 ← "0"
console.log(false == "" ); // true.... false → 0 === 0 ← ""
console.log(false == NaN); // false... false → 0 !== NaN
console.log(NaN == NaN); // false...... NaN is not equivalent to anything, including NaN.
// Type checked comparison (no conversion of types and values)
console.log(true === 1); // false...... data types do not match
// Explicit type coercion
console.log(true === !!2); // true.... data types and values match
console.log(true === !!0); // false... data types match, but values differ
console.log( 1 ? true : false); // true.... only ±0 and NaN are "falsy" numbers
console.log("0" ? true : false); // true.... only the empty string is "falsy"
console.log(Boolean({})); // true.... all objects are "truthy"
The new operator can be used to create an object wrapper for a Boolean primitive. However, the typeof operator does not return boolean for the object wrapper, it returns object. Because all objects evaluate as true, a method such as .valueOf(), or .toString(), must be used to retrieve the wrapped value. For explicit coercion to the Boolean type, Mozilla recommends that the Boolean() function (without new) be used in preference to the Boolean object.
const b = new Boolean(false); // Object false {}
const t = Boolean(b); // Boolean true
const f = Boolean(b.valueOf()); // Boolean false
let n = new Boolean(b); // Not recommended
n = new Boolean(b.valueOf()); // Preferred
if (0 || -0 || "" || null || undefined || b.valueOf() || !new Boolean() || !t) {
console.log("Never this");
} else if ([] && {} && b && typeof b === "object" && b.toString() === "false") {
console.log("Always this");
}
Symbol
New in ECMAScript6. A Symbol is a unique and immutable identifier.
Example:
let x = Symbol(1);
const y = Symbol(1);
x === y; // => false
const symbolObject = {};
const normalObject = {};
// since x and y are unique,
// they can be used as unique keys in an object
symbolObject[x] = 1;
symbolObject[y] = 2;
symbolObject[x]; // => 1
symbolObject[y]; // => 2
// as compared to normal numeric keys
normalObject[1] = 1;
normalObject[1] = 2; // overrides the value of 1
normalObject[1]; // => 2
// changing the value of x does not change the key stored in the object
x = Symbol(3);
symbolObject[x]; // => undefined
// changing x back just creates another unique Symbol
x = Symbol(1);
symbolObject[x]; // => undefined
There are also well known symbols.
One of which is Symbol.iterator; if something implements Symbol.iterator, it's iterable:
const x = [1, 2, 3, 4]; // x is an Array
x[Symbol.iterator] === Array.prototype[Symbol.iterator]; // and Arrays are iterable
const xIterator = x[Symbol.iterator](); // The [Symbol.iterator] function should provide an iterator for x
xIterator.next(); // { value: 1, done: false }
xIterator.next(); // { value: 2, done: false }
xIterator.next(); // { value: 3, done: false }
xIterator.next(); // { value: 4, done: false }
xIterator.next(); // { value: undefined, done: true }
xIterator.next(); // { value: undefined, done: true }
// for..of loops automatically iterate values
for (const value of x) {
console.log(value); // 1 2 3 4
}
// Sets are also iterable:
[Symbol.iterator] in Set.prototype; // true
for (const value of new Set(['apple', 'orange'])) {
console.log(value); // "apple" "orange"
}
Native objects
The JavaScript language provides a handful of native objects. JavaScript native objects are considered part of the JavaScript specification. JavaScript environment notwithstanding, this set of objects should always be available.
Array
An Array is a JavaScript object prototyped from the Array constructor specifically designed to store data values indexed by integer keys. Arrays, unlike the basic Object type, are prototyped with methods and properties to aid the programmer in routine tasks (for example, join, slice, and push).
As in the C family, arrays use a zero-based indexing scheme: A value that is inserted into an empty array by means of the push method occupies the 0th index of the array.
const myArray = []; // Point the variable myArray to a newly ...
// ... created, empty Array
myArray.push("hello World"); // Fill the next empty index, in this case 0
console.log(myArray[0]); // Equivalent to console.log("hello World");
Arrays have a length property that is guaranteed to always be larger than the largest integer index used in the array. It is automatically updated, if one creates a property with an even larger index. Writing a smaller number to the length property will remove larger indices.
Elements of Arrays may be accessed using normal object property access notation:
myArray[1]; // the 2nd item in myArray
myArray["1"];
The above two are equivalent. It's not possible to use the "dot"-notation or strings with alternative representations of the number:
myArray.1; // syntax error
myArray["01"]; // not the same as myArray[1]
Declaration of an array can use either an Array literal or the Array constructor:
let myArray;
// Array literals
myArray = [1, 2]; // length of 2
myArray = [1, 2,]; // same array - You can also have an extra comma at the end
// It's also possible to not fill in parts of the array
myArray = [0, 1, /* hole */, /* hole */, 4, 5]; // length of 6
myArray = [0, 1, /* hole */, /* hole */, 4, 5,]; // same array
myArray = [0, 1, /* hole */, /* hole */, 4, 5, /* hole */,]; // length of 7
// With the constructor
myArray = new Array(0, 1, 2, 3, 4, 5); // length of 6
myArray = new Array(365); // an empty array with length 365
Arrays are implemented so that only the defined elements use memory; they are "sparse arrays". Setting myArray[10] = 'someThing' and myArray[57] = 'somethingOther' only uses space for these two elements, just like any other object. The length of the array will still be reported as 58. The maximum length of an array is 4,294,967,295 which corresponds to 32-bit binary number (11111111111111111111111111111111)2.
One can use the object declaration literal to create objects that behave much like associative arrays in other languages:
const dog = {color: "brown", size: "large"};
dog["color"]; // results in "brown"
dog.color; // also results in "brown"
One can use the object and array declaration literals to quickly create arrays that are associative, multidimensional, or both. (Technically, JavaScript does not support multidimensional arrays, but one can mimic them with arrays-of-arrays.)
const cats = [{color: "brown", size: "large"},
{color: "black", size: "small"}];
cats[0]["size"]; // results in "large"
const dogs = {rover: {color: "brown", size: "large"},
spot: {color: "black", size: "small"}};
dogs["spot"]["size"]; // results in "small"
dogs.rover.color; // results in "brown"
Date
A Date object stores a signed millisecond count with zero representing 1970-01-01 00:00:00 UT and a range of ±108 days. There are several ways of providing arguments to the Date constructor. Note that months are zero-based.
new Date(); // create a new Date instance representing the current time/date.
new Date(2010, 3, 1); // create a new Date instance representing 2010-Mar-01 00:00:00
new Date(2010, 3, 1, 14, 25, 30); // create a new Date instance representing 2010-Mar-01 14:25:30
new Date("2010-3-1 14:25:30"); // create a new Date instance from a String.
Methods to extract fields are provided, as well as a useful toString:
const d = new Date(2010, 2, 1, 14, 25, 30); // 2010-Mar-01 14:25:30;
// Displays '2010-3-1 14:25:30':
console.log(d.getFullYear() + '-' + (d.getMonth() + 1) + '-' + d.getDate() + ' '
+ d.getHours() + ':' + d.getMinutes() + ':' + d.getSeconds());
// Built-in toString returns something like 'Mon Mar 01 2010 14:25:30 GMT-0500 (EST)':
console.log(d);
Error
Custom error messages can be created using the Error class:
throw new Error("Something went wrong.");
These can be caught by try...catch...finally blocks as described in the section on exception handling.
Math
The Math object contains various math-related constants (for example, π) and functions (for example, cosine). (Note that the Math object has no constructor, unlike Array or Date. All its methods are "static", that is "class" methods.) All the trigonometric functions use angles expressed in radians, not degrees or grads.
| Property | Returned value rounded to 5 digits | Description |
|---|---|---|
| Math.E | 2.7183 | e: Natural logarithm base |
| Math.LN2 | 0.69315 | Natural logarithm of 2 |
| Math.LN10 | 2.3026 | Natural logarithm of 10 |
| Math.LOG2E | 1.4427 | Logarithm to the base 2 of e |
| Math.LOG10E | 0.43429 | Logarithm to the base 10 of e |
| Math.PI | 3.14159 | π: circumference/diameter of a circle |
| Math.SQRT1_2 | 0.70711 | Square root of ½ |
| Math.SQRT2 | 1.4142 | Square root of 2 |
| Example | Returned value rounded to 5 digits | Description |
|---|---|---|
| Math.abs(-2.3) | 2.3 | Absolute value |
| Math.acos(Math.SQRT1_2) | 0.78540 rad = 45° | Arccosine |
| Math.asin(Math.SQRT1_2) | 0.78540 rad = 45° | Arcsine |
| Math.atan(1) | 0.78540 rad = 45° | Half circle arctangent ( to ) |
| Math.atan2(-3.7, -3.7) | −2.3562 rad = −135° | Whole circle arctangent ( to ) |
| Math.ceil(1.1) | 2 | Ceiling: round up to smallest integer ≥ argument |
| Math.cos(Math.PI/4) | 0.70711 | Cosine |
| Math.exp(1) | 2.7183 | Exponential function: e raised to this power |
| Math.floor(1.9) | 1 | Floor: round down to largest integer ≤ argument |
| Math.log(Math.E) | 1 | Natural logarithm, base e |
| Math.max(1, -2) | 1 | Maximum: (x > y) ? x : y |
| Math.min(1, -2) | −2 | Minimum: (x < y) ? x : y |
| Math.pow(-3, 2) | 9 | Exponentiation (raised to the power of): Math.pow(x, y) gives xy |
| Math.random() | e.g. 0.17068 | Pseudorandom number between 0 (inclusive) and 1 (exclusive) |
| Math.round(1.5) | 2 | Round to the nearest integer; half fractions are rounded up (e.g. 1.5 rounds to 2) |
| Math.sin(Math.PI/4) | 0.70711 | Sine |
| Math.sqrt(49) | 7 | Square root |
| Math.tan(Math.PI/4) | 1 | Tangent |
Regular expression
/expression/.test(string); // returns Boolean
"string".search(/expression/); // returns position Number
"string".replace(/expression/, replacement);
// Here are some examples
if (/Tom/.test("My name is Tom")) console.log("Hello Tom!");
console.log("My name is Tom".search(/Tom/)); // == 11 (letters before Tom)
console.log("My name is Tom".replace(/Tom/, "John")); // == "My name is John"
Character classes
// \d - digit
// \D - non digit
// \s - space
// \S - non space
// \w - word char
// \W - non word
// [ ] - one of
// [^] - one not of
// - - range
if (/\d/.test('0')) console.log('Digit');
if (/[0-9]/.test('6')) console.log('Digit');
if (/[13579]/.test('1')) console.log('Odd number');
if (/\S\S\s\S\S\S\S/.test('My name')) console.log('Format OK');
if (/\w\w\w/.test('Tom')) console.log('Hello Tom');
if (/[a-zA-Z]/.test('B')) console.log('Letter');
Character matching
// A...Z a...z 0...9 - alphanumeric
// \u0000...\uFFFF - Unicode hexadecimal
// \x00...\xFF - ASCII hexadecimal
// \t - tab
// \n - new line
// \r - CR
// . - any character
// | - OR
if (/T.m/.test('Tom')) console.log ('Hi Tom, Tam or Tim');
if (/A|B/.test("A")) console.log ('A or B');
Repeaters
// ? - 0 or 1 match
// * - 0 or more
// + - 1 or more
// {n} - exactly n
// {n,} - n or more
// {0,n} - n or less
// {n,m} - range n to m
if (/ab?c/.test("ac")) console.log("OK"); // match: "ac", "abc"
if (/ab*c/.test("ac")) console.log("OK"); // match: "ac", "abc", "abbc", "abbbc" etc.
if (/ab+c/.test("abc")) console.log("OK"); // match: "abc", "abbc", "abbbc" etc.
if (/ab{3}c/.test("abbbc")) console.log("OK"); // match: "abbbc"
if (/ab{3,}c/.test("abbbc")) console.log("OK"); // match: "abbbc", "abbbbc", "abbbbbc" etc.
if (/ab{1,3}c/.test("abc")) console.log("OK"); // match: "abc", "abbc", "abbbc"
Anchors
// ^ - string starts with
// $ - string ends with
if (/^My/.test("My name is Tom")) console.log ("Hi!");
if (/Tom$/.test("My name is Tom")) console.log ("Hi Tom!");
Subexpression
// ( ) - groups characters
if (/water(mark)?/.test("watermark")) console.log("Here is water!"); // match: "water", "watermark",
if (/(Tom)|(John)/.test("John")) console.log("Hi Tom or John!");
Flags
// /g - global
// /i - ignore upper/lower case
// /m - allow matches to span multiple lines
console.log("hi tom!".replace(/Tom/i, "John")); // == "hi John!"
console.log("ratatam".replace(/ta/, "tu")); // == "ratutam"
console.log("ratatam".replace(/ta/g, "tu")); // == "ratutum"
Advanced methods
my_array = my_string.split(my_delimiter);
// example
my_array = "dog,cat,cow".split(","); // my_array==["dog","cat","cow"];
my_array = my_string.match(my_expression);
// example
my_array = "We start at 11:30, 12:15 and 16:45".match(/\d\d:\d\d/g); // my_array==["11:30","12:15","16:45"];
Capturing groups
const myRe = /(\d{4}-\d{2}-\d{2}) (\d{2}:\d{2}:\d{2})/;
const results = myRe.exec("The date and time are 2009-09-08 09:37:08.");
if (results) {
console.log("Matched: " + results[0]); // Entire match
const my_date = results[1]; // First group == "2009-09-08"
const my_time = results[2]; // Second group == "09:37:08"
console.log(`It is ${my_time} on ${my_date}`);
} else console.log("Did not find a valid date!");
Function
Every function in JavaScript is an instance of the Function constructor:
// x, y is the argument. 'return x + y' is the function body, which is the last in the argument list.
const add = new Function('x', 'y', 'return x + y');
add(1, 2); // => 3
The add function above may also be defined using a function expression:
const add = function(x, y) {
return x + y;
};
add(1, 2); // => 3
In ES6, arrow function syntax was added, allowing functions that return a value to be more concise. They also retain the this of the global object instead of inheriting it from where it was called / what it was called on, unlike the function() {} expression.
const add = (x, y) => {return x + y;};
// values can also be implicitly returned (i.e. no return statement is needed)
const addImplicit = (x, y) => x + y;
add(1, 2); // => 3
addImplicit(1, 2) // => 3
For functions that need to be hoisted, there is a separate expression:
function add(x, y) {
return x + y;
}
add(1, 2); // => 3
Hoisting allows you to use the function before it is "declared":
add(1, 2); // => 3, not a ReferenceError
function add(x, y) {
return x + y;
}
A function instance has properties and methods.
function subtract(x, y) {
return x - y;
}
console.log(subtract.length); // => 2, arity of the function (number of arguments)
console.log(subtract.toString());
/*
"function subtract(x, y) {
return x - y;
}"
*/
Operators
The '+' operator is overloaded: it is used for string concatenation and arithmetic addition. This may cause problems when inadvertently mixing strings and numbers. As a unary operator, it can convert a numeric string to a number.
// Concatenate 2 strings
console.log('He' + 'llo'); // displays Hello
// Add two numbers
console.log(2 + 6); // displays 8
// Adding a number and a string results in concatenation (from left to right)
console.log(2 + '2'); // displays 22
console.log('$' + 3 + 4); // displays $34, but $7 may have been expected
console.log('$' + (3 + 4)); // displays $7
console.log(3 + 4 + '7'); // displays 77, numbers stay numbers until a string is added
// Convert a string to a number using the unary plus
console.log(+'2' === 2); // displays true
console.log(+'Hello'); // displays NaN
Similarly, the '*' operator is overloaded: it can convert a string into a number.
console.log(2 + '6'*1); // displays 8
console.log(3*'7'); // 21
console.log('3'*'7'); // 21
console.log('hello'*'world'); // displays NaN
Arithmetic
JavaScript supports the following binary arithmetic operators:
+ | addition |
- | subtraction |
* | multiplication |
/ | division (returns a floating-point value) |
% | modulo (returns the remainder) |
** | exponentiation |
JavaScript supports the following unary arithmetic operators:
+ | unary conversion of string to number |
- | unary negation (reverses the sign) |
++ | increment (can be prefix or postfix) |
-- | decrement (can be prefix or postfix) |
let x = 1;
console.log(++x); // x becomes 2; displays 2
console.log(x++); // displays 2; x becomes 3
console.log(x); // x is 3; displays 3
console.log(x--); // displays 3; x becomes 2
console.log(x); // displays 2; x is 2
console.log(--x); // x becomes 1; displays 1
The modulo operator displays the remainder after division by the modulus. If negative numbers are involved, the returned value depends on the operand.
const x = 17;
console.log(x%5); // displays 2
console.log(x%6); // displays 5
console.log(-x%5); // displays -2
console.log(-x%-5); // displays -2
console.log(x%-5); // displays 2
To always return a non-negative number, re-add the modulus and apply the modulo operator again:
const x = 17;
console.log((-x%5+5)%5); // displays 3
You could also do:
const x = 17;
console.log(Math.abs(-x%5)); // also 3
Assignment
= | assign |
+= | add and assign |
-= | subtract and assign |
*= | multiply and assign |
/= | divide and assign |
%= | modulo and assign |
**= | exponentiation and assign |
let x = 9;
x += 1;
console.log(x); // displays: 10
x *= 30;
console.log(x); // displays: 300
x /= 6;
console.log(x); // displays: 50
x -= 3;
console.log(x); // displays: 47
x %= 7;
console.log(x); // displays: 5
Assignment of object types
/**
* To learn JavaScript objects...
*/
const object_1 = {a: 1}; // assign reference of newly created object to object_1
let object_2 = {a: 0};
let object_3 = object_2; // object_3 references the same object as object_2 does
object_3.a = 2;
message(); // displays 1 2 2
object_2 = object_1; // object_2 now references the same object as object_1
// object_3 still references what object_2 referenced before
message(); // displays 1 1 2
object_2.a = 7; // modifies object_1
message(); // displays 7 7 2
object_3.a = 5; // object_3 doesn't change object_2
message(); // displays 7 7 5
object_3 = object_2;
object_3.a=4; // object_3 changes object_1 and object_2
message(); // displays 4 4 4
/**
* Prints the console.log message
*/
function message() {
console.log(object_1.a + " " + object_2.a + " " + object_3.a);
}
Destructuring assignment
In Mozilla's JavaScript, since version 1.7, destructuring assignment allows the assignment of parts of data structures to several variables at once. The left hand side of an assignment is a pattern that resembles an arbitrarily nested object/array literal containing l-lvalues at its leaves that are to receive the substructures of the assigned value.
let a, b, c, d, e;
[a, b, c] = [3, 4, 5];
console.log(`${a},${b},${c}`); // displays: 3,4,5
e = {foo: 5, bar: 6, baz: ['Baz', 'Content']};
const arr = [];
({baz: [arr[0], arr[3]], foo: a, bar: b}) = e;
console.log(`${a},${b},${arr}`); // displays: 5,6,Baz,,,Content
[a, b] = [b, a]; // swap contents of a and b
console.log(a + ',' + b); // displays: 6,5
[a, b, c] = [3, 4, 5]; // permutations
[a, b, c] = [b, c, a];
console.log(`${a},${b},${c}`); // displays: 4,5,3
Spread/rest operator
The ECMAScript 2015 standard introduces the "..." operator, for the related concepts of "spread syntax"[12] and "rest parameters"[13]
Spread syntax provides another way to destructure arrays. It indicates that the elements in a specified array should be used as the parameters in a function call or the items in an array literal.
In other words, "..." transforms "[...foo]" into "[foo[0], foo[1], foo[2]]", and "this.bar(...foo);" into "this.bar(foo[0], foo[1], foo[2]);".
const a = [1, 2, 3, 4];
// It can be used multiple times in the same expression
const b = [...a, ...a]; // b = [1, 2, 3, 4, 1, 2, 3, 4];
// It can be combined with non-spread items.
const c = [5, 6, ...a, 7, 9]; // c = [5, 6, 1, 2, 3, 4, 7, 9];
// For comparison, doing this without the spread operator
// creates a nested array.
const d = [a, a]; // d = [[1, 2, 3, 4], [1, 2, 3, 4]]
// It works the same with function calls
function foo(arg1, arg2, arg3) {
console.log(`${arg1}:${arg2}:${arg3}`);
}
// You can use it even if it passes more parameters than the function will use
foo(...a); // "1:2:3" → foo(a[0], a[1], a[2], a[3]);
// You can mix it with non-spread parameters
foo(5, ...a, 6); // "5:1:2" → foo(5, a[0], a[1], a[2], a[3], 6);
// For comparison, doing this without the spread operator
// assigns the array to arg1, and nothing to the other parameters.
foo(a); // "1,2,3,4:undefined:undefined"
When ... is used in a function declaration, it indicates a rest parameter. The rest parameter must be the final named parameter in the function's parameter list. It will be assigned an Array containing any arguments passed to the function in excess of the other named parameters. In other words, it gets "the rest" of the arguments passed to the function (hence the name).
function foo(a, b, ...c) {
console.log(c.length);
}
foo(1, 2, 3, 4, 5); // "3" → c = [3, 4, 5]
foo('a', 'b'); // "0" → c = []
Rest parameters are similar to Javascript's arguments object, which is an array-like object that contains all of the parameters (named and unnamed) in the current function call. Unlike arguments, however, rest parameters are true Array objects, so methods such as .slice() and .sort() can be used on them directly.
The ... operator can only be used with Array objects. (However, there is a proposal to extend it to Objects in a future ECMAScript standard.[14])
Comparison
== | equal |
!= | not equal |
> | greater than |
>= | greater than or equal to |
< | less than |
<= | less than or equal to |
=== | identical (equal and of same type) |
!== | not identical |
Variables referencing objects are equal or identical only if they reference the same object:
const obj1 = {a: 1};
const obj2 = {a: 1};
const obj3 = obj1;
console.log(obj1 == obj2); //false
console.log(obj3 == obj1); //true
console.log(obj3 === obj1); //true
See also String.
Logical
JavaScript provides four logical operators:
- unary negation (
NOT = !a) - binary disjunction (
OR = a || b) and conjunction (AND = a && b) - ternary conditional (
c ? t : f)
In the context of a logical operation, any expression evaluates to true except the following:
- Strings:
"",'', - Numbers:
0,-0,NaN, - Special:
null,undefined, - Boolean:
false.
The Boolean function can be used to explicitly convert to a primitive of type Boolean:
// Only empty strings return false
console.log(Boolean("") === false);
console.log(Boolean("false") === true);
console.log(Boolean("0") === true);
// Only zero and NaN return false
console.log(Boolean(NaN) === false);
console.log(Boolean(0) === false);
console.log(Boolean(-0) === false); // equivalent to -1*0
console.log(Boolean(-2) === true);
// All objects return true
console.log(Boolean(this) === true);
console.log(Boolean({}) === true);
console.log(Boolean([]) === true);
// These types return false
console.log(Boolean(null) === false);
console.log(Boolean(undefined) === false); // equivalent to Boolean()
The NOT operator evaluates its operand as a Boolean and returns the negation. Using the operator twice in a row, as a double negative, explicitly converts an expression to a primitive of type Boolean:
console.log( !0 === Boolean(!0));
console.log(Boolean(!0) === !!1);
console.log(!!1 === Boolean(1));
console.log(!!0 === Boolean(0));
console.log(Boolean(0) === !1);
console.log(!1 === Boolean(!1));
console.log(!"" === Boolean(!""));
console.log(Boolean(!"") === !!"s");
console.log(!!"s" === Boolean("s"));
console.log(!!"" === Boolean(""));
console.log(Boolean("") === !"s");
console.log(!"s" === Boolean(!"s"));
The ternary operator can also be used for explicit conversion:
console.log([] == false); console.log([] ? true : false); // “truthy”, but the comparison uses [].toString()
console.log([0] == false); console.log([0]? true : false); // [0].toString() == "0"
console.log("0" == false); console.log("0"? true : false); // "0" → 0 ... (0 == 0) ... 0 ← false
console.log([1] == true); console.log([1]? true : false); // [1].toString() == "1"
console.log("1" == true); console.log("1"? true : false); // "1" → 1 ... (1 == 1) ... 1 ← true
console.log([2] != true); console.log([2]? true : false); // [2].toString() == "2"
console.log("2" != true); console.log("2"? true : false); // "2" → 2 ... (2 != 1) ... 1 ← true
Expressions that use features such as post–incrementation (i++) have an anticipated side effect. JavaScript provides short-circuit evaluation of expressions; the right operand is only executed if the left operand does not suffice to determine the value of the expression.
console.log(a || b); // When a is true, there is no reason to evaluate b.
console.log(a && b); // When a is false, there is no reason to evaluate b.
console.log(c ? t : f); // When c is true, there is no reason to evaluate f.
In early versions of JavaScript and JScript, the binary logical operators returned a Boolean value (like most C-derived programming languages). However, all contemporary implementations return one of their operands instead:
console.log(a || b); // if a is true, return a, otherwise return b
console.log(a && b); // if a is false, return a, otherwise return b
Programmers who are more familiar with the behavior in C might find this feature surprising, but it allows for a more concise expression of patterns like null coalescing:
const s = t || "(default)"; // assigns t, or the default value, if t is null, empty, etc.
Logical assignment
??= |
Nullish assignment |
||= |
Logical Or assignment |
&&= |
Logical And assignment |
Bitwise
JavaScript supports the following binary bitwise operators:
& | AND |
| | OR |
^ | XOR |
| ! | NOT |
<< | shift left (zero fill at right) |
>> | shift right (sign-propagating); copies of the leftmost bit (sign bit) are shifted in from the left |
>>> | shift right (zero fill at left). For positive numbers,>> and >>> yield the same result. |
Examples:
const x = 11 & 6;
console.log(x); // 2
JavaScript supports the following unary bitwise operator:
~ | NOT (inverts the bits) |
Bitwise Assignment
JavaScript supports the following binary assignment operators:
&= | and |
|= | or |
^= | xor |
<<= | shift left (zero fill at right) |
>>= | shift right (sign-propagating); copies of the leftmost bit (sign bit) are shifted in from the left |
>>>= | shift right (zero fill at left). For positive numbers,>>= and >>>= yield the same result. |
Examples:
let x=7;
console.log(x); // 7
x<<=3;
console.log(x); // 7->14->28->56
String
= | assignment |
+ | concatenation |
+= | concatenate and assign |
Examples:
let str = "ab" + "cd"; // "abcd"
str += "e"; // "abcde"
const str2 = "2" + 2; // "22", not "4" or 4.
??
JavaScript's nearest operator is ??, the "nullish coalescing operator," which was added to the standard in ECMAScript's 11th edition.[15] In earlier versions, it could be used via a Babel plugin, and in TypeScript. It evaluates its left-hand operand and, if the result value is not "nullish" (null or undefined), takes that value as its result; otherwise, it evaluates the right-hand operand and takes the resulting value as its result.
In the following example, a will be assigned the value of b if the value of b is not null or undefined, otherwise it will be assigned 3.
const a = b ?? 3;
Before the nullish coalescing operator, programmers would use the logical OR operator (||). But where ?? looks specifically for null or undefined, the || operator looks for any falsy value: null, undefined, "", 0, NaN, and of course, false.
In the following example, a will be assigned the value of b if the value of b is truthy, otherwise it will be assigned 3.
const a = b || 3;
Control structures
Compound statements
A pair of curly brackets { } and an enclosed sequence of statements constitute a compound statement, which can be used wherever a statement can be used.
If ... else
if (expr) {
//statements;
} else if (expr2) {
//statements;
} else {
//statements;
}
Conditional (ternary) operator
The conditional operator creates an expression that evaluates as one of two expressions depending on a condition. This is similar to the if statement that selects one of two statements to execute depending on a condition. I.e., the conditional operator is to expressions what if is to statements.
const result = condition ? expression : alternative;
is the same as:
if (condition) {
const result = expression;
} else {
const result = alternative;
}
Unlike the if statement, the conditional operator cannot omit its "else-branch".
Switch statement
The syntax of the JavaScript switch statement is as follows:
switch (expr) {
case SOMEVALUE:
// statements;
break;
case ANOTHERVALUE:
// statements for when ANOTHERVALUE || ORNAOTHERONE
// no break statement, falling through to the following case
case ORANOTHERONE:
// statements specific to ORANOTHERONE (i.e. !ANOTHERVALUE && ORANOTHER);
break; //The buck stops here.
case YETANOTHER:
// statements;
break;
default:
// statements;
break;
}
break;is optional; however, it is usually needed, since otherwise code execution will continue to the body of the next case block. This fall through behavior can be used when the same set of statements apply in several cases, effectively creating a disjunction between those cases.- Add a break statement to the end of the last case as a precautionary measure, in case additional cases are added later.
- String literal values can also be used for the case values.
- Expressions can be used instead of values.
- The default case (optional) is executed when the expression does not match any other specified cases.
- Braces are required.
For loop
The syntax of the JavaScript for loop is as follows:
for (initial; condition; loop statement) {
/*
statements will be executed every time
the for{} loop cycles, while the
condition is satisfied
*/
}
or
for (initial; condition; loop statement(iteration)) // one statement
For ... in loop
The syntax of the JavaScript for ... in loop is as follows:
for (var property_name in some_object) {
// statements using some_object[property_name];
}
- Iterates through all enumerable properties of an object.
- Iterates through all used indices of array including all user-defined properties of array object, if any. Thus it may be better to use a traditional for loop with a numeric index when iterating over arrays.
- There are differences between the various Web browsers with regard to which properties will be reflected with the for...in loop statement. In theory, this is controlled by an internal state property defined by the ECMAscript standard called "DontEnum", but in practice, each browser returns a slightly different set of properties during introspection. It is useful to test for a given property using
if (some_object.hasOwnProperty(property_name)) { ...}. Thus, adding a method to the array prototype withArray.prototype.newMethod = function() {...} may causefor ... inloops to loop over the method's name.
While loop
The syntax of the JavaScript while loop is as follows:
while (condition) {
statement1;
statement2;
statement3;
...
}
Do ... while loop
The syntax of the JavaScript do ... while loop is as follows:
do {
statement1;
statement2;
statement3;
...
} while (condition);
With
The with statement adds all of the given object's properties and methods into the following block's scope, letting them be referenced as if they were local variables.
with (document) {
const a = getElementById('a');
const b = getElementById('b');
const c = getElementById('c');
};
- Note the absence of document. before each getElementById() invocation.
The semantics are similar to the with statement of Pascal.
Because the availability of with statements hinders program performance and is believed to reduce code clarity (since any given variable could actually be a property from an enclosing with), this statement is not allowed in strict mode.
Labels
JavaScript supports nested labels in most implementations. Loops or blocks can be labelled for the break statement, and loops for continue. Although goto is a reserved word,[16] goto is not implemented in JavaScript.
loop1: for (let a = 0; a < 10; ++a) {
if (a === 4) break loop1; // Stops after the 4th attempt
console.log('a = ' + a);
loop2: for (let b = 0; b < 10; ++b) {
if (b === 3) continue loop2; // Number 3 is skipped
if (b === 6) continue loop1; // Continues the first loop, 'finished' is not shown
console.log('b = ' + b);
} //end of loop2
console.log('finished');
} //end of loop1
block1: {
console.log('Hello'); // Displays 'Hello'
break block1;
console.log('World'); // Will never get here
}
goto block1; // Parse error.
Functions
A function is a block with a (possibly empty) parameter list that is normally given a name. A function may use local variables. If you exit the function without a return statement, the value undefined is returned.
function gcd(number1, number2) {
if isNaN(number1*number2) throw TypeError("Non-Numeric arguments not allowed.");
number1 = Math.round(number1);
number2 = Math.round(number2);
let difference = number1 - number2;
if (difference === 0) return number1;
return difference > 0 ? gcd(number2, difference) : gcd(number1, -difference);
}
console.log(gcd(60, 40)); // 20
//In the absence of parentheses following the identifier 'gcd' on the RHS of the assignment below,
//'gcd' returns a reference to the function itself without invoking it.
let mygcd = gcd; // mygcd and gcd reference the same function.
console.log(mygcd(60, 40)); // 20
Functions are first class objects and may be assigned to other variables.
The number of arguments given when calling a function may not necessarily correspond to the number of arguments in the function definition; a named argument in the definition that does not have a matching argument in the call will have the value undefined (that can be implicitly cast to false). Within the function, the arguments may also be accessed through the arguments object; this provides access to all arguments using indices (e.g. arguments[0], arguments[1], ... arguments[n]), including those beyond the number of named arguments. (While the arguments list has a .length property, it is not an instance of Array; it does not have methods such as .slice(), .sort(), etc.)
function add7(x, y) {
if (!y) {
y = 7;
}
console.log(x + y + arguments.length);
};
add7(3); // 11
add7(3, 4); // 9
Primitive values (number, boolean, string) are passed by value. For objects, it is the reference to the object that is passed.
const obj1 = {a : 1};
const obj2 = {b : 2};
function foo(p) {
p = obj2; // Ignores actual parameter
p.b = arguments[1];
}
foo(obj1, 3); // Does not affect obj1 at all. 3 is additional parameter
console.log(`${obj1.a} ${obj2.b}`); // writes 1 3
Functions can be declared inside other functions, and access the outer function's local variables. Furthermore, they implement full closures by remembering the outer function's local variables even after the outer function has exited.
let t = "Top";
let bar, baz;
function foo() {
let f = "foo var";
bar = function() { console.log(f) };
baz = function(x) { f = x; };
}
foo();
baz("baz arg");
bar(); // "baz arg" (not "foo var") even though foo() has exited.
console.log(t); // Top
Async/await
The await operator in JavaScript can only be used from inside an async function or at the top level of a module. If the parameter is a promise, execution of the async function will resume when the promise is resolved (unless the promise is rejected, in which case an error will be thrown that can be handled with normal JavaScript exception handling). If the parameter is not a promise, the parameter itself will be returned immediately.[17]
Many libraries provide promise objects that can also be used with await, as long as they match the specification for native JavaScript promises. However, promises from the jQuery library were not Promises/A+ compatible until jQuery 3.0.[18]
Here's an example (modified from this[19] article):
async function createNewDoc() {
let response = await db.post({}); // post a new doc
return db.get(response.id); // find by id
}
async function main() {
try {
let doc = await createNewDoc();
console.log(doc);
} catch (err) {
console.log(err);
}
}
main();
Objects
For convenience, types are normally subdivided into primitives and objects. Objects are entities that have an identity (they are only equal to themselves) and that map property names to values ("slots" in prototype-based programming terminology). Objects may be thought of as associative arrays or hashes, and are often implemented using these data structures. However, objects have additional features, such as a prototype chain, which ordinary associative arrays do not have.
JavaScript has several kinds of built-in objects, namely Array, Boolean, Date, Function, Math, Number, Object, RegExp and String. Other objects are "host objects", defined not by the language, but by the runtime environment. For example, in a browser, typical host objects belong to the DOM (window, form, links, etc.).
Creating objects
Objects can be created using a constructor or an object literal. The constructor can use either a built-in Object function or a custom function. It is a convention that constructor functions are given a name that starts with a capital letter:
// Constructor
const anObject = new Object();
// Object literal
const objectA = {};
const objectA2 = {}; // A != A2, {}s create new objects as copies.
const objectB = {index1: 'value 1', index2: 'value 2'};
// Custom constructor (see below)
Object literals and array literals allow one to easily create flexible data structures:
const myStructure = {
name: {
first: "Mel",
last: "Smith"
},
age: 33,
hobbies: ["chess", "jogging"]
};
This is the basis for JSON, which is a simple notation that uses JavaScript-like syntax for data exchange.
Methods
A method is simply a function that has been assigned to a property name of an object. Unlike many object-oriented languages, there is no distinction between a function definition and a method definition in object-related JavaScript. Rather, the distinction occurs during function calling; a function can be called as a method.
When called as a method, the standard local variable this is just automatically set to the object instance to the left of the ".". (There are also call and apply methods that can set this explicitly—some packages such as jQuery do unusual things with this.)
In the example below, Foo is being used as a constructor. There is nothing special about a constructor - it is just a plain function that initialises an object. When used with the new keyword, as is the norm, this is set to a newly created blank object.
Note that in the example below, Foo is simply assigning values to slots, some of which are functions. Thus it can assign different functions to different instances. There is no prototyping in this example.
function px() { return this.prefix + "X"; }
function Foo(yz) {
this.prefix = "a-";
if (yz > 0) {
this.pyz = function() { return this.prefix + "Y"; };
} else {
this.pyz = function() { return this.prefix + "Z"; };
}
this.m1 = px;
return this;
}
const foo1 = new Foo(1);
const foo2 = new Foo(0);
foo2.prefix = "b-";
console.log("foo1/2 " + foo1.pyz() + foo2.pyz());
// foo1/2 a-Y b-Z
foo1.m3 = px; // Assigns the function itself, not its evaluated result, i.e. not px()
const baz = {"prefix": "c-"};
baz.m4 = px; // No need for a constructor to make an object.
console.log("m1/m3/m4 " + foo1.m1() + foo1.m3() + baz.m4());
// m1/m3/m4 a-X a-X c-X
foo1.m2(); // Throws an exception, because foo1.m2 doesn't exist.
Constructors
Constructor functions simply assign values to slots of a newly created object. The values may be data or other functions.
Example: Manipulating an object:
function MyObject(attributeA, attributeB) {
this.attributeA = attributeA;
this.attributeB = attributeB;
}
MyObject.staticC = "blue"; // On MyObject Function, not object
console.log(MyObject.staticC); // blue
const object = new MyObject('red', 1000);
console.log(object.attributeA); // red
console.log(object.attributeB); // 1000
console.log(object.staticC); // undefined
object.attributeC = new Date(); // add a new property
delete object.attributeB; // remove a property of object
console.log(object.attributeB); // undefined
The constructor itself is referenced in the object's prototype's constructor slot. So,
function Foo() {}
// Use of 'new' sets prototype slots (for example,
// x = new Foo() would set x's prototype to Foo.prototype,
// and Foo.prototype has a constructor slot pointing back to Foo).
const x = new Foo();
// The above is almost equivalent to
const y = {};
y.constructor = Foo;
y.constructor();
// Except
x.constructor == y.constructor; // true
x instanceof Foo; // true
y instanceof Foo; // false
// y's prototype is Object.prototype, not
// Foo.prototype, since it was initialised with
// {} instead of new Foo.
// Even though Foo is set to y's constructor slot,
// this is ignored by instanceof - only y's prototype's
// constructor slot is considered.
Functions are objects themselves, which can be used to produce an effect similar to "static properties" (using C++/Java terminology) as shown below. (The function object also has a special prototype property, as discussed in the "Inheritance" section below.)
Object deletion is rarely used as the scripting engine will garbage collect objects that are no longer being referenced.
Inheritance
JavaScript supports inheritance hierarchies through prototyping in the manner of Self.
In the following example, the Derived class inherits from the Base class. When d is created as Derived, the reference to the base instance of Base is copied to d.base.
Derive does not contain a value for aBaseFunction, so it is retrieved from aBaseFunction when aBaseFunction is accessed. This is made clear by changing the value of base.aBaseFunction, which is reflected in the value of d.aBaseFunction.
Some implementations allow the prototype to be accessed or set explicitly using the __proto__ slot as shown below.
function Base() {
this.anOverride = function() { console.log("Base::anOverride()"); };
this.aBaseFunction = function() { console.log("Base::aBaseFunction()"); };
}
function Derived() {
this.anOverride = function() { console.log("Derived::anOverride()"); };
}
const base = new Base();
Derived.prototype = base; // Must be before new Derived()
Derived.prototype.constructor = Derived; // Required to make `instanceof` work
const d = new Derived(); // Copies Derived.prototype to d instance's hidden prototype slot.
d instanceof Derived; // true
d instanceof Base; // true
base.aBaseFunction = function() { console.log("Base::aNEWBaseFunction()"); };
d.anOverride(); // Derived::anOverride()
d.aBaseFunction(); // Base::aNEWBaseFunction()
console.log(d.aBaseFunction == Derived.prototype.aBaseFunction); // true
console.log(d.__proto__ == base); // true in Mozilla-based implementations and false in many others.
The following shows clearly how references to prototypes are copied on instance creation, but that changes to a prototype can affect all instances that refer to it.
function m1() { return "One"; }
function m2() { return "Two"; }
function m3() { return "Three"; }
function Base() {}
Base.prototype.m = m2;
const bar = new Base();
console.log("bar.m " + bar.m()); // bar.m Two
function Top() { this.m = m3; }
const t = new Top();
const foo = new Base();
Base.prototype = t;
// No effect on foo, the *reference* to t is copied.
console.log("foo.m " + foo.m()); // foo.m Two
const baz = new Base();
console.log("baz.m " + baz.m()); // baz.m Three
t.m = m1; // Does affect baz, and any other derived classes.
console.log("baz.m1 " + baz.m()); // baz.m1 One
In practice many variations of these themes are used, and it can be both powerful and confusing.
Exception handling
JavaScript includes a try ... catch ... finally exception handling statement to handle run-time errors.
The try ... catch ... finally statement catches exceptions resulting from an error or a throw statement. Its syntax is as follows:
try {
// Statements in which exceptions might be thrown
} catch(errorValue) {
// Statements that execute in the event of an exception
} finally {
// Statements that execute afterward either way
}
Initially, the statements within the try block execute. If an exception is thrown, the script's control flow immediately transfers to the statements in the catch block, with the exception available as the error argument. Otherwise the catch block is skipped. The catch block can throw(errorValue), if it does not want to handle a specific error.
In any case the statements in the finally block are always executed. This can be used to free resources, although memory is automatically garbage collected.
Either the catch or the finally clause may be omitted. The catch argument is required.
The Mozilla implementation allows for multiple catch statements, as an extension to the ECMAScript standard. They follow a syntax similar to that used in Java:
try { statement; }
catch (e if e == "InvalidNameException") { statement; }
catch (e if e == "InvalidIdException") { statement; }
catch (e if e == "InvalidEmailException") { statement; }
catch (e) { statement; }
In a browser, the onerror event is more commonly used to trap exceptions.
onerror = function (errorValue, url, lineNr) {...; return true;};
Native functions and methods
eval (expression)
Evaluates the first parameter as an expression, which can include assignment statements. Variables local to functions can be referenced by the expression. However, eval represents a major security risk, as it allows a bad actor to execute arbitrary code, so its use is discouraged.[21]
> (function foo() {
... var x = 7;
... console.log("val " + eval("x + 2"));
... })();
val 9
undefined
References
- JavaScript 1.1 specification
- "Chapter 1. Basic JavaScript". speakingjs.com. Retrieved 22 September 2020.
- Flanagan, David (2006). JavaScript: The definitive Guide. p. 16. ISBN 978-0-596-10199-2.
Omitting semicolons is not a good programming practice; you should get into the habit of inserting them.
- "Storing the information you need — Variables - Learn web development | MDN". developer.mozilla.org. 9 May 2023. Retrieved 23 June 2023.
- "Values, Variables, and Literals - MDC". Mozilla Developer Network. 16 September 2010. Archived from the original on 29 June 2011. Retrieved 1 February 2020.
- "JavaScript Hoisting". W3Schools.
In JavaScript, a variable can be declared after it has been used. In other words; a variable can be used before it has been declared.
- "JavaScript Scoping and Hoisting", Ben Cherry, Adequately Good, 2010-02-08
- ECMA-262 5e edition clarified this behavior with the Declarative Environment Record and Object Environment Record. With this formalism, the global object is the Object Environment Record of the global Lexical Environment (the global scope).
- "Template literals". MDN Web Docs. Retrieved 2 May 2018.
- "Comparison Operators - MDC Doc Center". Mozilla. 5 August 2010. Retrieved 5 March 2011.
- "The Elements of JavaScript Style". Douglas Crockford. Retrieved 5 March 2011.
- "Spread syntax".
- "rest parameters".
- "Ecmascript". Archived from the original on 9 August 2016.
- "ECMAScript 2020 Language Specification". Ecma International. June 2020.
- ECMA-262, Edition 3, 7.5.3 Future Reserved Words
- "await - JavaScript (MDN)". Retrieved 2 May 2017.
- "jQuery Core 3.0 Upgrade Guide". Retrieved 2 May 2017.
- "Taming the asynchronous beast with ES7". Retrieved 12 November 2015.
- Foundation, Node.js. "Node v8.0.0 (Current) - Node.js". Node.js.
- "eval()". MDN Web Docs. Retrieved 29 January 2020.
Further reading
- Danny Goodman: JavaScript Bible, Wiley, John & Sons, ISBN 0-7645-3342-8.
- David Flanagan, Paula Ferguson: JavaScript: The Definitive Guide, O'Reilly & Associates, ISBN 0-596-10199-6.
- Thomas A. Powell, Fritz Schneider: JavaScript: The Complete Reference, McGraw-Hill Companies, ISBN 0-07-219127-9.
- Axel Rauschmayer: Speaking JavaScript: An In-Depth Guide for Programmers, 460 pages, O'Reilly Media, 25 February 2014, ISBN 978-1449365035. (free online edition)
- Emily Vander Veer: JavaScript For Dummies, 4th Edition, Wiley, ISBN 0-7645-7659-3.
External links
- A re-introduction to JavaScript - Mozilla Developer Center
- JavaScript Loops
- ECMAScript standard references: ECMA-262
- Interactive JavaScript Lessons - example-based
- JavaScript on About.com: lessons and explanation Archived 25 February 2017 at the Wayback Machine
- JavaScript Training
- Mozilla Developer Center Core References for JavaScript versions 1.5, 1.4, 1.3 and 1.2
- Mozilla JavaScript Language Documentation