Draisine

Basic railbike-draisine

"Draisines", called dressin in Swedish, dresin in Norwegian, dræsine in Danish, and resiina in Finnish, refers to pedal-powered rail-cycles which were used by railroad maintenance workers in Finland, Sweden, and Norway until about 1950, as handcars were elsewhere.

Draisines nowadays are used for recreation on several unused railway lines in Germany, Sweden, Norway, Poland, some other European countries and South Korea.[2] Several companies rent draisines in Sweden.[3] In the United States, railbike tours have operated in several states nationwide: California,[4] Maine,[5] Oregon,[6] the Adirondack Mountains of upstate New York,[7] and Delaware.[8]

Until 2007, Finland hosted an annual competition, Resiina-ralli (Draisine Rally), involving several draisine teams travelling for many days on the railways from one corner of the country to another.

• 
  Hand-lever draisine handcar
• 
• 
  Functioning draisine
• 
  Three-wheeled draisine at the Saskatchewan Railway Museum exhibited by a railway history museum in Metelen, Germany
• 
  Combined pedal and hand driven railway bike in museum of Khabarovsk Bridge, Russia
• 
  Three-wheeled handcar designed to be operated by a single person, widely known in the United States as a handcar or velocipede
• 
  Pedaled four-wheel rail-cycle draisine
• 
  Purpose-built bicycle for riding the Hotchkiss Bicycle Railroad
• 
  A row of draisines for hire: The railway runs between Broby and Glimminge, Sweden
• 
  Speeders is another term for a small motorized draisine.
• 
  Motorized draisines are known as speeders, trolleys, or “jiggers” in the United States and Canada.
• 
  Draisine for crew transport and railway track inspection in Namibia 2017
• 
  Even this small railbus is related to the draisine.

• 
  Jeep shunting empty coal hoppers, World War II
• 
  And the "Big jeep" (or "Beep"), the WWII Dodge WC model, was also used for draisine duty
• 
  Car (Russian GAZ-13 Chaika) converted into a railroad speeder, at the Hungarian Railway Museum
• 
  Deutsche Bundesbahn railroad speeder based on the Volkswagen Type 2

Armoured draisine Tatra T18 built in Czechoslovakia for Polish armed forces (1930s)

The military use of draisines concerned, first of all, armoured draisines. They were light armoured rail motor vehicles, intended for reconnaissance, scouting, track patrolling, and other auxiliary combat tasks, usually belonging to armoured trains. Early vehicles of this kind were built in Russia during World War I. Later, often armoured cars were used as armoured draisines, after exchanging their wheels to railroad ones, or fitting them with additional retractable railroad rollers. Some countries, however, manufactured purpose-built armoured draisines between the wars, such as the USSR and Czechoslovakia. Peculiar vehicles were Polish armoured draisines - they were tanks or tankettes fitted with special rail chassis, able to be used on rails or on the ground, leaving the rail chassis on the rails.

Some countries developed railtrack armoured draisines, with retractable railroad wheels; they were not widely used, however. Different armoured draisines were used during the Second World War, starting from the invasion of Poland by Nazi Germany.

Prior to World War II, the Japanese Empire had already made extensive use of draisines such as the Sumida M.2593 in the Japanese invasion of Manchuria and the Sino-Japanese War.[9] From 1952, the Wikham Armoured Trolley was used by British security forces during the Malayan Emergency.[10]

People have been putting bicycles on railroad tracks ever since there have been both bicycles and railroads. From time to time, factory-built models have been available, beginning with a device marketed in 1908 through the Sears catalogue for just US$5.45 (equivalent to $178 in 2022).

There are many designs of draisine. However, certain fundamentals of railbike design must be adhered to, foremost among them the reconciliation of a bicycle's stability with adaptation to riding on a railway track: bicycles are kept upright by the rider steering in the direction of an impending fall, but this ability is sacrificed when the bicycle is constrained by rails. Simply adding flanged wheels to a conventional bicycle would make it impossible to balance, so the typical approach to stabilization is to add an outrigger, with roller(s), across to the second rail from near the bicycle’s rear wheel. Even such an outrigger system is not without its complications, as tracks that are no longer perfectly parallel — common on sections of abandoned track — can result in derailment. Additional guide rollers can help alleviate this problem at the expense of greater weight.

Media related to Draisines at Wikimedia Commons

• Railriders Archived 2020-06-29 at the Wayback Machine Video produced by Oregon Field Guide