Number density

Volume number density is the number of specified objects per unit volume:[1]

${\displaystyle n={\frac {N}{V}},}$

where N is the total number of objects in a volume V.

Here it is assumed[2] that N is large enough that rounding of the count to the nearest integer does not introduce much of an error, however V is chosen to be small enough that the resulting n does not depend much on the size or shape of the volume V because of large-scale features.

Area number density is the number of specified objects per unit area, A:

${\displaystyle n'={\frac {N}{A}},}$

Similarly, linear number density is the number of specified objects per unit length, L:

${\displaystyle n''={\frac {N}{L}},}$

Column number density is a kind of areal density, the number or count of a substance per unit area, obtained integrating volumetric number density along a vertical path:

$${\displaystyle n'_{c}=\int n\,\mathrm {d} s.}$$

It's related to column mass density, with the volumetric number density replaced by the volume mass density.

In SI units, number density is measured in m⁻³, although cm⁻³ is often used. However, these units are not quite practical when dealing with atoms or molecules of gases, liquids or solids at room temperature and atmospheric pressure, because the resulting numbers are extremely large (on the order of 10²⁰). Using the number density of an ideal gas at 0 °C and 1 atm as a yardstick: n₀ = 1 amg = 2.6867774 × 10²⁵ m⁻³ is often introduced as a unit of number density, for any substances at any conditions (not necessarily limited to an ideal gas at 0 °C and 1 atm).[3]

Using the number density as a function of spatial coordinates, the total number of objects N in the entire volume V can be calculated as

${\displaystyle N=\iiint _{V}n(x,\,y,\,z)\,\mathrm {d} V,}$

where dV = dx dy dz is a volume element. If each object possesses the same mass m₀, the total mass m of all the objects in the volume V can be expressed as

${\displaystyle m=\iiint _{V}m_{0}n(x,\,y,\,z)\,\mathrm {d} V.}$

Similar expressions are valid for electric charge or any other extensive quantity associated with countable objects. For example, replacing m with q (total charge) and m₀ with q₀ (charge of each object) in the above equation will lead to a correct expression for charge.

The number density of solute molecules in a solvent is sometimes called concentration, although usually concentration is expressed as a number of moles per unit volume (and thus called molar concentration).

The following table lists common examples of number densities at 1 atm and 20 °C, unless otherwise noted.

• Columnar number density