Mean airway pressure

In ventilation with a square flow waveform this equation can be used:

${\displaystyle {\bar {P}}_{aw}=0.5\times (PIP-PEEP)\times (T_{I}/T_{tot})+PEEP}$

where:

• ${\displaystyle {\bar {P}}_{aw}}$ = mean airway pressure
• ${\displaystyle PIP}$= peak inspiratory pressure
• ${\displaystyle PEEP}$= peak end expiratory pressure
• ${\displaystyle T_{I}}$= inspiratory time
• ${\displaystyle T_{tot}}$= cycle time

During pressure control ventilation this variant of the equation can be used:

${\displaystyle {\bar {P}}_{aw}=(PIP-PEEP)\times (T_{I}/T_{tot})+PEEP}$ where:

• ${\displaystyle {\bar {P}}_{aw}}$ = mean airway pressure
• ${\displaystyle PIP}$= peak inspiratory pressure
• ${\displaystyle PEEP}$= peak end expiratory pressure
• ${\displaystyle T_{I}}$= inspiratory time
• ${\displaystyle T_{tot}}$= cycle time[3]

Variables of APRV schematic

In airway pressure release ventilation (APRV) a variation of the previous equation must be used for the variables:

${\displaystyle {\bar {P}}_{aw}={\frac {(P_{high}\times T_{high})\,+(P_{low}\times T_{low})}{T_{high}+T_{low}}}}$

where:

• ${\displaystyle {\bar {P}}_{aw}}$= mean airway pressure
• ${\displaystyle {P}_{high}}$= peak inspiratory pressure (PIP)
• ${\displaystyle {P}_{low}}$= peak end expiratory pressure
• ${\displaystyle {T}_{high}}$= time spent at ${\displaystyle {P}_{high}}$
• ${\displaystyle {T}_{low}}$= time spent at ${\displaystyle {P}_{low}}$[4]

${\displaystyle M_{PAW}={\frac {f\times T_{i}}{60}}\times (P_{IP}-PEEP)+PEEP}$

${\displaystyle M_{PAW}={\frac {F_{1}}{F_{1}+F_{E}}}\times P_{IP}+\left(1-{\frac {F_{1}}{F_{1}+F_{E}}}\right)\times PEEP}$

${\displaystyle M_{PAW}={\frac {(R)(T_{i})(P_{I})+[60-(R)(T_{i})](PEEP)}{60}}}$

${\displaystyle M_{PAW}={\frac {f\times T_{i}}{60}}\times (P_{IP}-PEEP)+PEEP}$[5]

${\displaystyle M_{PAW}={\frac {(T_{i}\times P_{IP})+(T_{e}\times PEEP)}{T_{i}+T_{e}}}}$