Electricity generation

Past costs of producing renewable energy have declined significantly, with 62% of total renewable power generation added in 2020 having lower costs than the cheapest new fossil fuel option.[6]

Levelized cost: With increasingly widespread implementation of renewable energy sources, costs for renewables have declined, most notably for energy generated by solar panels.[7]
Levelized cost of energy (LCOE) is a measure of the average net present cost of electricity generation for a generating plant over its lifetime.

Dynamos and engine installed at Edison General Electric Company, New York 1895

The fundamental principles of electricity generation were discovered in the 1820s and early 1830s by British scientist Michael Faraday. His method, still used today, is for electricity to be generated by the movement of a loop of wire, or Faraday disc, between the poles of a magnet. Central power stations became economically practical with the development of alternating current (AC) power transmission, using power transformers to transmit power at high voltage and with low loss.

Commercial electricity production started with the coupling of the dynamo to the hydraulic turbine. The mechanical production of electric power began the Second Industrial Revolution and made possible several inventions using electricity, with the major contributors being Thomas Alva Edison and Nikola Tesla. Previously the only way to produce electricity was by chemical reactions or using battery cells, and the only practical use of electricity was for the telegraph.

Electricity generation at central power stations started in 1882, when a steam engine driving a dynamo at Pearl Street Station produced a DC current that powered public lighting on Pearl Street, New York. The new technology was quickly adopted by many cities around the world, which adapted their gas-fueled street lights to electric power. Soon after electric lights would be used in public buildings, in businesses, and to power public transport, such as trams and trains.

The first power plants used water power or coal.[8] Today a variety of energy sources are used, such as coal, nuclear, natural gas, hydroelectric, wind, and oil, as well as solar energy, tidal power, and geothermal sources.

In the 1880s the popularity of electricity grew massively with the introduction of the Incandescent light bulb. Although there are 22 recognised inventors of the light bulb prior to Joseph Swan and Thomas Edison, Edison and Swan's invention became by far the most successful and popular of all. During the early years of the 19th century, massive jumps in electrical sciences were made. And by the later 19th century the advancement of electrical technology and engineering led to electricity being part of everyday life. With the introduction of many electrical inventions and their implementation into everyday life, the demand for electricity within homes grew dramatically. With this increase in demand, the potential for profit was seen by many entrepreneurs who began investing into electrical systems to eventually create the first electricity public utilities. This process in history is often described as electrification.[9]

The earliest distribution of electricity came from companies operating independently of one another. A consumer would purchase electricity from a producer, and the producer would distribute it through their own power grid. As technology improved so did the productivity and efficiency of its generation. Inventions such as the steam turbine had a massive impact on the efficiency of electrical generation but also the economics of generation as well. This conversion ofheat energy into mechanical work was similar to that of steam engines, however at a significantly larger scale and far more productively. The improvements of these large-scale generation plants were critical to the process of centralised generation as they would become vital to the entire power system that we now use today.

Throughout the middle of the 20th century many utilities began merging their distribution networks due to economic and efficiency benefits. Along with the invention of long-distance power transmission, the coordination of power plants began to form. This system was then secured by regional system operators to ensure stability and reliability. The electrification of homes began in Northern Europe and in the Northern America in the 1920s in large cities and urban areas. It wasn't until the 1930s that rural areas saw the large-scale establishment of electrification.[10]

Several fundamental methods exist to convert other forms of energy into electrical energy. Utility-scale generation is achieved by rotating electric generators or by photovoltaic systems. A small proportion of electric power distributed by utilities is provided by batteries. Other forms of electricity generation used in niche applications include the triboelectric effect, the piezoelectric effect, the thermoelectric effect, and betavoltaics.

Generators

Main article: Electric generator

Wind turbines usually provide electrical generation in conjunction with other methods of producing power.

Electric generators transform kinetic energy into electricity. This is the most used form for generating electricity and is based on Faraday's law. It can be seen experimentally by rotating a magnet within closed loops of conducting material (e.g. copper wire). Almost all commercial electrical generation is done using electromagnetic induction, in which mechanical energy forces a generator to rotate.

Electrochemistry

Large dams, such as Hoover Dam in the United States, can provide large amounts of hydroelectric power. It has an installed capacity of 2.07 GW.

Electrochemistry is the direct transformation of chemical energy into electricity, as in a battery. Electrochemical electricity generation is important in portable and mobile applications. Currently, most electrochemical power comes from batteries.[13] Primary cells, such as the common zinc–carbon batteries, act as power sources directly, but secondary cells (i.e. rechargeable batteries) are used for storage systems rather than primary generation systems. Open electrochemical systems, known as fuel cells, can be used to extract power either from natural fuels or from synthesized fuels. Osmotic power is a possibility at places where salt and fresh water merge.

The selection of electricity production modes and their economic viability varies in accordance with demand and region. The economics vary considerably around the world, resulting in widespread residential selling prices. Hydroelectric plants, nuclear power plants, thermal power plants and renewable sources have their own pros and cons, and selection is based upon the local power requirement and the fluctuations in demand. All power grids have varying loads on them but the daily minimum is the base load, often supplied by plants which run continuously. Nuclear, coal, oil, gas and some hydro plants can supply base load. If well construction costs for natural gas are below $10 per MWh, generating electricity from natural gas is cheaper than generating power by burning coal.[15]

Nuclear power plants can produce a huge amount of power from a single unit. However, nuclear disasters have raised concerns over the safety of nuclear power, and the capital cost of nuclear plants is very high. Hydroelectric power plants are located in areas where the potential energy from falling water can be harnessed for moving turbines and the generation of power. It may not be an economically viable single source of production where the ability to store the flow of water is limited and the load varies too much during the annual production cycle.

A large generator with the rotor removed

Electric generators were known in simple forms from the discovery of electromagnetic induction in the 1830s. In general, some form of prime mover such as an engine or the turbines described above, drives a rotating magnetic field past stationary coils of wire thereby turning mechanical energy into electricity.[16] The only commercial scale electricity production that does not employ a generator is solar PV.

Turbines

Large dams such as Three Gorges Dam in China can provide large amounts of hydroelectric power; it has a 22.5 GW capability.

Almost all commercial electrical power on Earth is generated with a turbine, driven by wind, water, steam or burning gas. The turbine drives a generator, thus transforming its mechanical energy into electrical energy by electromagnetic induction. There are many different methods of developing mechanical energy, including heat engines, hydro, wind and tidal power. Most electric generation is driven by heat engines. The combustion of fossil fuels supplies most of the energy to these engines, with a significant fraction from nuclear fission and some from renewable sources. The modern steam turbine (invented by Sir Charles Parsons in 1884) currently generates about 80% of the electric power in the world using a variety of heat sources. Turbine types include:

• Steam
  • Water is boiled by coal burned in a thermal power plant. About 41% of all electricity is generated this way.[17]
  • Nuclear fission heat created in a nuclear reactor creates steam. Less than 15% of electricity is generated this way.
  • Renewable energy. The steam is generated by biomass, solar thermal energy, or geothermal power.
• Natural gas: turbines are driven directly by gases produced by combustion. Combined cycle are driven by both steam and natural gas. They generate power by burning natural gas in a gas turbine and use residual heat to generate steam. At least 20% of the world's electricity is generated by natural gas.
• Water Energy is captured by a water turbine from the movement of water - from falling water, the rise and fall of tides or ocean thermal currents (see ocean thermal energy conversion). Currently, hydroelectric plants provide approximately 16% of the world's electricity.
• The windmill was a very early wind turbine. In 2018 around 5% of the world's electricity was produced from wind.

Although turbines are most common in commercial power generation, smaller generators can be powered by gasoline or diesel engines. These may used for backup generation or as a prime source of power within isolated villages.

Total worldwide gross production of electricity in 2016 was 25 082 TWh. Sources of electricity were coal and peat 38.3%, natural gas 23.1%, hydroelectric 16.6%, nuclear power 10.4%, oil 3.7%, solar/wind/geothermal/tidal/other 5.6%, biomass and waste 2.3%.[18]

In 2021, Wind and solar generated electricity reached 10% of globally produced electricity. Clean sources (Solar and wind and other) generated 38% of the world's electricity.[19]

Energy flow of power plant

Variations between countries generating electrical power affect concerns about the environment. In France only 10% of electricity is generated from fossil fuels, the US is higher at 70% and China is at 80%.[21] The cleanliness of electricity depends on its source. Methane leaks (from natural gas to fuel gas-fired power plants)[22] and carbon dioxide emissions from fossil fuel-based electricity generation account for a significant portion of world greenhouse gas emissions.[23] In the United States, fossil fuel combustion for electric power generation is responsible for 65% of all emissions of sulfur dioxide, the main component of acid rain.[24] Electricity generation is the fourth highest combined source of NO_x, carbon monoxide, and particulate matter in the US.[25]

According to the International Energy Agency (IEA), low-carbon electricity generation needs to account for 85% of global electrical output by 2040 in order to ward off the worst effects of climate change.[26] Like other organizations including the Energy Impact Center (EIC)[27] and the United Nations Economic Commission for Europe (UNECE),[28] the IEA has called for the expansion of nuclear and renewable energy to meet that objective.[29] Some, like EIC founder Bret Kugelmass, believe that nuclear power is the primary method for decarbonizing electricity generation because it can also power direct air capture that removes existing carbon emissions from the atmosphere.[30] Nuclear power plants can also create district heating and desalination projects, limiting carbon emissions and the need for expanded electrical output.[31]

A fundamental issue regarding centralised generation and the current electrical generation methods in use today is the significant negative environmental effects that many of the generation processes have. Processes such as coal and gas not only release carbon dioxide as they combust, but their extraction from the ground also impacts the environment. Open pit coal mines use large areas of land to extract coal and limit the potential for productive land use after the excavation. Natural gas extraction releases large amounts of methane into the atmosphere when extracted from the ground greatly increase global greenhouse gases. Although nuclear power plants do not release carbon dioxide through electricity generation, there are significant risks associated with nuclear waste and safety concerns associated with the use of nuclear sources. This fear of nuclear power stems from large-scale nuclear catastrophes such as the Chernobyl Disaster and the Fukushima Daiichi nuclear disaster. Both tragedies led to significant casualties and the radioactive contamination of large areas.[32]

Per unit of electricity generated coal and gas-fired power life-cycle greenhouse gas emissions are almost always at least ten times that of other generation methods.[33]

Centralised generation is electricity generation by large-scale centralised facilities, sent through transmission lines to consumers. These facilities are usually located far away from consumers and distribute the electricity through high voltage transmission lines to a substation, where it is then distributed to consumers; the basic concept being that multi-megawatt or gigawatt scale large stations create electricity for a large number of people. The vast majority of electricity used is created from centralised generation. Most centralised power generation comes from large power plants run by fossil fuels such as coal or natural gas, though nuclear or large hydroelectricity plants are also commonly used.[34] Centralised generation is fundamentally the opposite of distributed generation. Distributed generation is the small-scale generation of electricity to smaller groups of consumers. This can also include independently producing electricity by either solar or wind power. In recent years distributed generation as has seen a spark in popularity due to its propensity to use renewable energy generation methods such as rooftop solar.[35]

Centralised energy sources are large power plants that produce huge amounts of electricity to a large number of consumers. Most power plants used in centralised generation are thermal power plants meaning that they use a fuel to heat steam to produce a pressurised gas which in turn spins a turbine and generates electricity. This is the traditional way of producing energy. This process relies on several forms of technology to produce widespread electricity, these being natural coal, gas and nuclear forms of thermal generation. More recently solar and wind have become large scale.

Solar

This section is an excerpt from Photovoltaic power station.[edit]

The 25.7 MW Lauingen Energy Park in Bavarian Swabia, Germany

A photovoltaic power station, also known as a solar park, solar farm, or solar power plant, is a large-scale grid-connected photovoltaic power system (PV system) designed for the supply of merchant power. They are different from most building-mounted and other decentralised solar power because they supply power at the utility level, rather than to a local user or users. The generic expression utility-scale solar is sometimes used to describe this type of project.

The solar power source is solar panels that convert light directly to electricity. However, this differs from and should not be confused with concentrated solar power, the other major large-scale solar generation technology, which uses heat to drive a variety of conventional generator systems. Both approaches have their own advantages and disadvantages, but to date, for a variety of reasons, photovoltaic technology has seen much wider use. As of 2019, about 97% of utility-scale solar power capacity was PV. [36][37]

In some countries, the nameplate capacity of photovoltaic power stations is rated in megawatt-peak (MW_p), which refers to the solar array's theoretical maximum DC power output. In other countries, the manufacturer states the surface and the efficiency. However, Canada, Japan, Spain and the United States often specify using the converted lower nominal power output in MW_AC, a measure more directly comparable to other forms of power generation. Most solar parks are developed at a scale of at least 1 MW_p. As of 2018, the world's largest operating photovoltaic power stations surpassed 1 gigawatt. As at the end of 2019, about 9,000 plants with a combined capacity of over 220 GW_AC were solar farms larger than 4 MW_AC (utility scale).[36]

Most of the existing large-scale photovoltaic power stations are owned and operated by independent power producers, but the involvement of community and utility-owned projects is increasing.[38] Previously almost all were supported at least in part by regulatory incentives such as feed-in tariffs or tax credits, but as levelized costs fell significantly in the 2010s and grid parity has been reached in most markets, external incentives are usually not needed.

Wind

This section is an excerpt from Wind farm.[edit]

The San Gorgonio Pass wind farm in California, United States.

The Gansu Wind Farm in China is the largest wind farm in the world, with a target capacity of 20,000 MW by 2020.

A wind farm or wind park, also called a wind power station or wind power plant,[39] is a group of wind turbines in the same location used to produce electricity. Wind farms vary in size from a small number of turbines to several hundred wind turbines covering an extensive area. Wind farms can be either onshore or offshore.

Many of the largest operational onshore wind farms are located in China, India, and the United States. For example, the largest wind farm in the world, Gansu Wind Farm in China had a capacity of over 6,000 MW by 2012,[40] with a goal of 20,000 MW[41] by 2020.[42] As of December 2020, the 1218 MW Hornsea Wind Farm in the UK is the largest offshore wind farm in the world.[43] Individual wind turbine designs continue to increase in power, resulting in fewer turbines being needed for the same total output.

Because they require no fuel, wind farms have less impact on the environment than many other forms of power generation and are often referred to as a good source of green energy. Wind farms have, however, been criticised for their visual impact and impact on the landscape. Typically they need to be spread over more land than other power stations and need to be built in wild and rural areas, which can lead to "industrialization of the countryside", habitat loss, and a drop in tourism. Some critics claim that wind farms have adverse health effects, but most researchers consider these claims to be pseudoscience (see wind turbine syndrome). Wind farms can interfere with radar, although in most cases, according to the US Department of Energy, "siting and other mitigations have resolved conflicts and allowed wind projects to co-exist effectively with radar".[44]

Coal

This section is an excerpt from Coal-fired power station.[edit]

Bełchatów Power Station in Bełchatów, Poland

Frimmersdorf Power Station in Grevenbroich, Germany

Coal-fired power station diagram

Share of electricity production from coal

A coal-fired power station or coal power plant is a thermal power station which burns coal to generate electricity. Worldwide, there are about 8,500 coal-fired power stations totaling over 2,000 gigawatts capacity. They generate about a third of the world's electricity,[45] but cause many illnesses and early deaths, mainly from air pollution.[46][47]

A coal-fired power station is a type of fossil fuel power station. The coal is usually pulverized and then burned in a pulverized coal-fired boiler. The furnace heat converts boiler water to steam, which is then used to spin turbines that turn generators. Thus chemical energy stored in coal is converted successively into thermal energy, mechanical energy and, finally, electrical energy.

Coal-fired power stations emit over 10 Gt of carbon dioxide each year,[48] about one fifth of world greenhouse gas emissions, so are the single largest cause of climate change.[49] More than half of all the coal-fired electricity in the world is generated in China.[50] In 2020 the total number of plants started falling[51][52] as they are being retired in Europe[53] and America[54] although still being built in Asia, almost all in China.[55] Some remain profitable because costs to other people due to the health and environmental impact of the coal industry are not priced into the cost of generation,[56][57] but there is the risk newer plants may become stranded assets.[58] The UN Secretary General has said that OECD countries should stop generating electricity from coal by 2030, and the rest of the world by 2040.[59]