Test-driven development

A graphical representation of the test-driven development lifecycle

The following sequence is based on the book Test-Driven Development by Example:[2]

1. Add a test

The adding of a new feature begins by writing a test that passes iff the feature's specifications are met. The developer can discover these specifications by asking about use cases and user stories. A key benefit of test-driven development is that it makes the developer focus on requirements before writing code. This is in contrast with the usual practice, where unit tests are only written after code.

2. Run all tests. The new test should fail for expected reasons

This shows that new code is actually needed for the desired feature. It validates that the test harness is working correctly. It rules out the possibility that the new test is flawed and will always pass.

3. Write the simplest code that passes the new test

Inelegant or hard code is acceptable, as long as it passes the test. The code will be honed anyway in Step 5. No code should be added beyond the tested functionality.

4. All tests should now pass

If any fail, the new code must be revised until they pass. This ensures the new code meets the test requirements and does not break existing features.

5. Refactor as needed, using tests after each refactor to ensure that functionality is preserved

Code is refactored for readability and maintainability. In particular, hard-coded test data should be removed. Running the test suite after each refactor helps ensure that no existing functionality is broken.

• Examples of refactoring:
  • moving code to where it most logically belongs
  • removing duplicate code
  • making names self-documenting
  • splitting methods into smaller pieces
  • re-arranging inheritance hierarchies

Repeat

The cycle above is repeated for each new piece of functionality. Tests should be small and incremental, and commits made often. That way, if new code fails some tests, the programmer can simply undo or revert rather than debug excessively. When using external libraries, it is important not to write tests that are so small as to effectively test merely the library itself,[4] unless there is some reason to believe that the library is buggy or not feature-rich enough to serve all the needs of the software under development.

There are various aspects to using test-driven development, for example the principles of "keep it simple, stupid" (KISS) and "You aren't gonna need it" (YAGNI). By focusing on writing only the code necessary to pass tests, designs can often be cleaner and clearer than is achieved by other methods.[2] In Test-Driven Development by Example, Kent Beck also suggests the principle "Fake it till you make it".

To achieve some advanced design concept such as a design pattern, tests are written that generate that design. The code may remain simpler than the target pattern, but still pass all required tests. This can be unsettling at first but it allows the developer to focus only on what is important.

Writing the tests first: The tests should be written before the functionality that is to be tested. This has been claimed to have many benefits. It helps ensure that the application is written for testability, as the developers must consider how to test the application from the outset rather than adding it later. It also ensures that tests for every feature get written. Additionally, writing the tests first leads to a deeper and earlier understanding of the product requirements, ensures the effectiveness of the test code, and maintains a continual focus on software quality.[6] When writing feature-first code, there is a tendency by developers and organisations to push the developer on to the next feature, even neglecting testing entirely. The first TDD test might not even compile at first, because the classes and methods it requires may not yet exist. Nevertheless, that first test functions as the beginning of an executable specification.[7]

Each test case fails initially: This ensures that the test really works and can catch an error. Once this is shown, the underlying functionality can be implemented. This has led to the "test-driven development mantra", which is "red/green/refactor", where red means fail and green means pass. Test-driven development constantly repeats the steps of adding test cases that fail, passing them, and refactoring. Receiving the expected test results at each stage reinforces the developer's mental model of the code, boosts confidence and increases productivity.

A 2005 study found that using TDD meant writing more tests and, in turn, programmers who wrote more tests tended to be more productive.[10] Hypotheses relating to code quality and a more direct correlation between TDD and productivity were inconclusive.[11]

Programmers using pure TDD on new ("greenfield") projects reported they only rarely felt the need to invoke a debugger. Used in conjunction with a version control system, when tests fail unexpectedly, reverting the code to the last version that passed all tests may often be more productive than debugging.[12]

Test-driven development offers more than just simple validation of correctness, but can also drive the design of a program.[13] By focusing on the test cases first, one must imagine how the functionality is used by clients (in the first case, the test cases). So, the programmer is concerned with the interface before the implementation. This benefit is complementary to design by contract as it approaches code through test cases rather than through mathematical assertions or preconceptions.

Test-driven development offers the ability to take small steps when required. It allows a programmer to focus on the task at hand as the first goal is to make the test pass. Exceptional cases and error handling are not considered initially, and tests to create these extraneous circumstances are implemented separately. Test-driven development ensures in this way that all written code is covered by at least one test. This gives the programming team, and subsequent users, a greater level of confidence in the code.

While it is true that more code is required with TDD than without TDD because of the unit test code, the total code implementation time could be shorter based on a model by Müller and Padberg.[14] Large numbers of tests help to limit the number of defects in the code. The early and frequent nature of the testing helps to catch defects early in the development cycle, preventing them from becoming endemic and expensive problems. Eliminating defects early in the process usually avoids lengthy and tedious debugging later in the project.

TDD can lead to more modularized, flexible, and extensible code. This effect often comes about because the methodology requires that the developers think of the software in terms of small units that can be written and tested independently and integrated together later. This leads to smaller, more focused classes, looser coupling, and cleaner interfaces. The use of the mock object design pattern also contributes to the overall modularization of the code because this pattern requires that the code be written so that modules can be switched easily between mock versions for unit testing and "real" versions for deployment.

Because no more code is written than necessary to pass a failing test case, automated tests tend to cover every code path. For example, for a TDD developer to add an else branch to an existing if statement, the developer would first have to write a failing test case that motivates the branch. As a result, the automated tests resulting from TDD tend to be very thorough: they detect any unexpected changes in the code's behaviour. This detects problems that can arise where a change later in the development cycle unexpectedly alters other functionality.

Madeyski[15] provided empirical evidence (via a series of laboratory experiments with over 200 developers) regarding the superiority of the TDD practice over the traditional Test-Last approach or testing for correctness approach, with respect to the lower coupling between objects (CBO). The mean effect size represents a medium (but close to large) effect on the basis of meta-analysis of the performed experiments which is a substantial finding. It suggests a better modularization (i.e., a more modular design), easier reuse and testing of the developed software products due to the TDD programming practice.[15] Madeyski also measured the effect of the TDD practice on unit tests using branch coverage (BC) and mutation score indicator (MSI),[16][17][18] which are indicators of the thoroughness and the fault detection effectiveness of unit tests, respectively. The effect size of TDD on branch coverage was medium in size and therefore is considered substantive effect.[15] These findings have been subsequently confirmed by further, smaller experimental evaluations of TDD.[19][20][21][22]

Test-driven development does not perform sufficient testing in situations where full functional tests are required to determine success or failure, due to extensive use of unit tests.[23] Examples of these are user interfaces, programs that work with databases, and some that depend on specific network configurations. TDD encourages developers to put the minimum amount of code into such modules and to maximize the logic that is in testable library code, using fakes and mocks to represent the outside world.[24]

Management support is essential. Without the entire organization believing that test-driven development is going to improve the product, management may feel that time spent writing tests is wasted.[25]

Unit tests created in a test-driven development environment are typically created by the developer who is writing the code being tested. Therefore, the tests may share blind spots with the code: if, for example, a developer does not realize that certain input parameters must be checked, most likely neither the test nor the code will verify those parameters. Another example: if the developer misinterprets the requirements for the module they are developing, the code and the unit tests they write will both be wrong in the same way. Therefore, the tests will pass, giving a false sense of correctness.

A high number of passing unit tests may bring a false sense of security, resulting in fewer additional software testing activities, such as integration testing and compliance testing.

Tests become part of the maintenance overhead of a project. Badly written tests, for example ones that include hard-coded error strings, are themselves prone to failure, and they are expensive to maintain. This is especially the case with fragile tests.[26] There is a risk that tests that regularly generate false failures will be ignored, so that when a real failure occurs, it may not be detected. It is possible to write tests for low and easy maintenance, for example by the reuse of error strings, and this should be a goal during the code refactoring phase described above.

Writing and maintaining an excessive number of tests costs time. Also, more-flexible modules (with limited tests) might accept new requirements without the need for changing the tests. For those reasons, testing for only extreme conditions, or a small sample of data, can be easier to adjust than a set of highly detailed tests.

The level of coverage and testing detail achieved during repeated TDD cycles cannot easily be re-created at a later date. Therefore, these original, or early, tests become increasingly precious as time goes by. The tactic is to fix it early. Also, if a poor architecture, a poor design, or a poor testing strategy leads to a late change that makes dozens of existing tests fail, then it is important that they are individually fixed. Merely deleting, disabling or rashly altering them can lead to undetectable holes in the test coverage.

Test-driven development has been adopted outside of software development, in both product and service teams, as test-driven work.[27] For testing to be successful, it needs to be practiced at the micro and macro levels. Every method in a class, every input data value, log message, and error code, amongst other data points, need to be tested.[28] Similar to TDD, non-software teams develop quality control (QC) checks (usually manual tests rather than automated tests) for each aspect of the work prior to commencing. These QC checks are then used to inform the design and validate the associated outcomes. The six steps of the TDD sequence are applied with minor semantic changes:

1. "Add a check" replaces "Add a test"
2. "Run all checks" replaces "Run all tests"
3. "Do the work" replaces "Write some code"
4. "Run all checks" replaces "Run tests"
5. "Clean up the work" replaces "Refactor code"
6. "Repeat"

Test-driven development is related to, but different from acceptance test–driven development (ATDD).[29] TDD is primarily a developer's tool to help create well-written unit of code (function, class, or module) that correctly performs a set of operations. ATDD is a communication tool between the customer, developer, and tester to ensure that the requirements are well-defined. TDD requires test automation. ATDD does not, although automation helps with regression testing. Tests used in TDD can often be derived from ATDD tests, since the code units implement some portion of a requirement. ATDD tests should be readable by the customer. TDD tests do not need to be.

BDD (behavior-driven development) combines practices from TDD and from ATDD.[30] It includes the practice of writing tests first, but focuses on tests which describe behavior, rather than tests which test a unit of implementation. Tools such as JBehave, Cucumber, Mspec and Specflow provide syntaxes which allow product owners, developers and test engineers to define together the behaviors which can then be translated into automated tests.

Test suite code clearly has to be able to access the code it is testing. On the other hand, normal design criteria such as information hiding, encapsulation and the separation of concerns should not be compromised. Therefore, unit test code for TDD is usually written within the same project or module as the code being tested.

In object oriented design this still does not provide access to private data and methods. Therefore, extra work may be necessary for unit tests. In Java and other languages, a developer can use reflection to access private fields and methods.[31] Alternatively, an inner class can be used to hold the unit tests so they have visibility of the enclosing class's members and attributes. In the .NET Framework and some other programming languages, partial classes may be used to expose private methods and data for the tests to access.

It is important that such testing hacks do not remain in the production code. In C and other languages, compiler directives such as #if DEBUG ... #endif can be placed around such additional classes and indeed all other test-related code to prevent them being compiled into the released code. This means the released code is not exactly the same as what was unit tested. The regular running of fewer but more comprehensive, end-to-end, integration tests on the final release build can ensure (among other things) that no production code exists that subtly relies on aspects of the test harness.

There is some debate among practitioners of TDD, documented in their blogs and other writings, as to whether it is wise to test private methods and data anyway. Some argue that private members are a mere implementation detail that may change, and should be allowed to do so without breaking numbers of tests. Thus it should be sufficient to test any class through its public interface or through its subclass interface, which some languages call the "protected" interface.[32] Others say that crucial aspects of functionality may be implemented in private methods and testing them directly offers advantage of smaller and more direct unit tests.[33][34]

There are many testing frameworks and tools that are useful in TDD.

Unit tests are so named because they each test one unit of code. A complex module may have a thousand unit tests and a simple module may have only ten. The unit tests used for TDD should never cross process boundaries in a program, let alone network connections. Doing so introduces delays that make tests run slowly and discourage developers from running the whole suite. Introducing dependencies on external modules or data also turns unit tests into integration tests. If one module misbehaves in a chain of interrelated modules, it is not so immediately clear where to look for the cause of the failure.

When code under development relies on a database, a web service, or any other external process or service, enforcing a unit-testable separation is also an opportunity and a driving force to design more modular, more testable and more reusable code.[36] Two steps are necessary:

1. Whenever external access is needed in the final design, an interface should be defined that describes the access available. See the dependency inversion principle for a discussion of the benefits of doing this regardless of TDD.
2. The interface should be implemented in two ways, one of which really accesses the external process, and the other of which is a fake or mock. Fake objects need do little more than add a message such as "Person object saved" to a trace log, against which a test assertion can be run to verify correct behaviour. Mock objects differ in that they themselves contain test assertions that can make the test fail, for example, if the person's name and other data are not as expected.

Fake and mock object methods that return data, ostensibly from a data store or user, can help the test process by always returning the same, realistic data that tests can rely upon. They can also be set into predefined fault modes so that error-handling routines can be developed and reliably tested. In a fault mode, a method may return an invalid, incomplete or null response, or may throw an exception. Fake services other than data stores may also be useful in TDD: A fake encryption service may not, in fact, encrypt the data passed; a fake random number service may always return 1. Fake or mock implementations are examples of dependency injection.

A test double is a test-specific capability that substitutes for a system capability, typically a class or function, that the UUT depends on. There are two times at which test doubles can be introduced into a system: link and execution. Link time substitution is when the test double is compiled into the load module, which is executed to validate testing. This approach is typically used when running in an environment other than the target environment that requires doubles for the hardware level code for compilation. The alternative to linker substitution is run-time substitution in which the real functionality is replaced during the execution of a test case. This substitution is typically done through the reassignment of known function pointers or object replacement.

Test doubles are of a number of different types and varying complexities:

• Dummy – A dummy is the simplest form of a test double. It facilitates linker time substitution by providing a default return value where required.
• Stub – A stub adds simplistic logic to a dummy, providing different outputs.
• Spy – A spy captures and makes available parameter and state information, publishing accessors to test code for private information allowing for more advanced state validation.
• Mock – A mock is specified by an individual test case to validate test-specific behavior, checking parameter values and call sequencing.
• Simulator – A simulator is a comprehensive component providing a higher-fidelity approximation of the target capability (the thing being doubled). A simulator typically requires significant additional development effort.[6]

A corollary of such dependency injection is that the actual database or other external-access code is never tested by the TDD process itself. To avoid errors that may arise from this, other tests are needed that instantiate the test-driven code with the "real" implementations of the interfaces discussed above. These are integration tests and are quite separate from the TDD unit tests. There are fewer of them, and they must be run less often than the unit tests. They can nonetheless be implemented using the same testing framework.

Integration tests that alter any persistent store or database should always be designed carefully with consideration of the initial and final state of the files or database, even if any test fails. This is often achieved using some combination of the following techniques:

• The TearDown method, which is integral to many test frameworks.
• try...catch...finally exception handling structures where available.
• Database transactions where a transaction atomically includes perhaps a write, a read and a matching delete operation.
• Taking a "snapshot" of the database before running any tests and rolling back to the snapshot after each test run. This may be automated using a framework such as Ant or NAnt or a continuous integration system such as CruiseControl.
• Initialising the database to a clean state before tests, rather than cleaning up after them. This may be relevant where cleaning up may make it difficult to diagnose test failures by deleting the final state of the database before detailed diagnosis can be performed.

Exercising TDD on large, challenging systems requires a modular architecture, well-defined components with published interfaces, and disciplined system layering with maximization of platform independence. These proven practices yield increased testability and facilitate the application of build and test automation.[6]

• TestDrivenDevelopment on WikiWikiWeb
• Bertrand Meyer (September 2004). "Test or spec? Test and spec? Test from spec!". Archived from the original on 2005-02-09.
• Microsoft Visual Studio Team Test from a TDD approach
• Write Maintainable Unit Tests That Will Save You Time And Tears
• Improving Application Quality Using Test-Driven Development (TDD)
• Test Driven Development Conference