Transmembrane protein

There are two basic types of transmembrane proteins:[3] alpha-helical and beta barrels. Alpha-helical proteins are present in the inner membranes of bacterial cells or the plasma membrane of eukaryotic cells, and sometimes in the bacterial outer membrane.[4] This is the major category of transmembrane proteins. In humans, 27% of all proteins have been estimated to be alpha-helical membrane proteins.[5] Beta-barrel proteins are so far found only in outer membranes of gram-negative bacteria, cell walls of gram-positive bacteria, outer membranes of mitochondria and chloroplasts, or can be secreted as pore-forming toxins. All beta-barrel transmembrane proteins have simplest up-and-down topology, which may reflect their common evolutionary origin and similar folding mechanism.

In addition to the protein domains, there are unusual transmembrane elements formed by peptides. A typical example is gramicidin A, a peptide that forms a dimeric transmembrane β-helix.[6] This peptide is secreted by gram-positive bacteria as an antibiotic. A transmembrane polyproline-II helix has not been reported in natural proteins. Nonetheless, this structure was experimentally observed in specifically designed artificial peptides.[7]

This classification refers to the position of the protein N- and C-termini on the different sides of the lipid bilayer. Types I, II, III and IV are single-pass molecules. Type I transmembrane proteins are anchored to the lipid membrane with a stop-transfer anchor sequence and have their N-terminal domains targeted to the endoplasmic reticulum (ER) lumen during synthesis (and the extracellular space, if mature forms are located on cell membranes). Type II and III are anchored with a signal-anchor sequence, with type II being targeted to the ER lumen with its C-terminal domain, while type III have their N-terminal domains targeted to the ER lumen. Type IV is subdivided into IV-A, with their N-terminal domains targeted to the cytosol and IV-B, with an N-terminal domain targeted to the lumen.[8] The implications for the division in the four types are especially manifest at the time of translocation and ER-bound translation, when the protein has to be passed through the ER membrane in a direction dependent on the type.

Group I and II transmembrane proteins have opposite final topologies. Group I proteins have the N terminus on the far side and C terminus on the cytosolic side. Group II proteins have the C terminus on the far side and N terminus in the cytosol. However final topology not the only criterion for defining transmembrane protein groups, rather location of topogenic determinants and mechanism of assembly is considered in the classification[9]

Transmembrane alpha-helical (α-helical) proteins are unusually stable judging from thermal denaturation studies, because they do not unfold completely within the membranes (the complete unfolding would require breaking down too many α-helical H-bonds in the nonpolar media). On the other hand, these proteins easily misfold, due to non-native aggregation in membranes, transition to the molten globule states, formation of non-native disulfide bonds, or unfolding of peripheral regions and nonregular loops that are locally less stable.

It is also important to properly define the unfolded state. The unfolded state of membrane proteins in detergent micelles is different from that in the thermal denaturation experiments. This state represents a combination of folded hydrophobic α-helices and partially unfolded segments covered by the detergent. For example, the "unfolded" bacteriorhodopsin in SDS micelles has four transmembrane α-helices folded, while the rest of the protein is situated at the micelle-water interface and can adopt different types of non-native amphiphilic structures. Free energy differences between such detergent-denatured and native states are similar to stabilities of water-soluble proteins (< 10 kcal/mol).

Refolding of α-helical transmembrane proteins in vitro is technically difficult. There are relatively few examples of the successful refolding experiments, as for bacteriorhodopsin. In vivo, all such proteins are normally folded co-translationally within the large transmembrane translocon. The translocon channel provides a highly heterogeneous environment for the nascent transmembrane α-helices. A relatively polar amphiphilic α-helix can adopt a transmembrane orientation in the translocon (although it would be at the membrane surface or unfolded in vitro), because its polar residues can face the central water-filled channel of the translocon. Such mechanism is necessary for incorporation of polar α-helices into structures of transmembrane proteins. The amphiphilic helices remain attached to the translocon until the protein is completely synthesized and folded. If the protein remains unfolded and attached to the translocon for too long, it is degraded by specific "quality control" cellular systems.

Stability of beta barrel (β-barrel) transmembrane proteins is similar to stability of water-soluble proteins, based on chemical denaturation studies. Some of them are very stable even in chaotropic agents and high temperature. Their folding in vivo is facilitated by water-soluble chaperones, such as protein Skp. It is thought that β-barrel membrane proteins come from one ancestor even having different number of sheets which could be added or doubled during evolution. Some studies show a huge sequence conservation among different organisms and also conserved amino acids which hold the structure and help with folding.[17]

• Bacteriorhodopsin-like proteins including rhodopsin (see also opsin)
• Bacterial photosynthetic reaction centres and photosystems I and II
• Light-harvesting complexes from bacteria and chloroplasts

• Transmembrane cytochrome b-like proteins: coenzyme Q - cytochrome c reductase (cytochrome bc1 ); cytochrome b6f complex; formate dehydrogenase, respiratory nitrate reductase; succinate - coenzyme Q reductase (fumarate reductase); and succinate dehydrogenase. See electron transport chain.
• Cytochrome c oxidases from bacteria and mitochondria

• Proton or sodium translocating F-type and V-type ATPases

• P-type calcium ATPase (five different conformations)
• Calcium ATPase regulators phospholamban and sarcolipin
• ABC transporters
• General secretory pathway (Sec) translocon (preprotein translocase SecY)

• Mitochondrial carrier proteins
• Major Facilitator Superfamily (Glycerol-3-phosphate transporter, Lactose permease, and Multidrug transporter EmrD)
• Resistance-nodulation-cell division (multidrug efflux transporter AcrB, see multidrug resistance)
• Dicarboxylate/amino acid:cation symporter (proton glutamate symporter)
• Monovalent cation/proton antiporter (Sodium/proton antiporter 1 NhaA)
• Neurotransmitter sodium symporter
• Ammonia transporters
• Drug/Metabolite Transporter (small multidrug resistance transporter EmrE - the structures are retracted as erroneous)

• Voltage-gated ion channel like, including potassium channels KcsA and KvAP, and inward-rectifier potassium ion channel Kirbac
• Large-conductance mechanosensitive channel, MscL
• Small-conductance mechanosensitive ion channel (MscS)
• CorA metal ion transporters
• Ligand-gated ion channel of neurotransmitter receptors (acetylcholine receptor)
• Aquaporins
• Chloride channels
• Outer membrane auxiliary proteins (polysaccharide transporter) - α-helical transmembrane proteins from the outer bacterial membrane

• Methane monooxygenase
• Rhomboid protease
• Disulfide bond formation protein (DsbA-DsbB complex)

• T cell receptor transmembrane dimerization domain ]
• Cytochrome c nitrite reductase complex
• Steryl-sulfate sulfohydrolase
• Stannin
• Glycophorin A dimer
• Inovirus (filamentous phage) major coat protein
• Pilin
• Pulmonary surfactant-associated protein
• Monoamine oxidases A and B
• Fatty acid amide hydrolase[18]
• Cytochrome P450 oxidases
• Corticosteroid 11β-dehydrogenases .
• Signal Peptide Peptidase
• Membrane protease specific for a stomatin homolog

• Beta barrels from eight beta-strands and with "shear number" of ten (n=8, S=10). They include:
  • OmpA-like transmembrane domain (OmpA)
  • Virulence-related outer membrane protein family (OmpX)
  • Outer membrane protein W family (OmpW)
  • Antimicrobial peptide resistance and lipid A acylation protein family (PagP)
  • Lipid A deacylase PagL
  • Opacity family porins (NspA)
• Autotransporter domain (n=12,S=14)
• FadL outer membrane protein transport family, including Fatty acid transporter FadL (n=14,S=14)
• General bacterial porin family, known as trimeric porins (n=16,S=20)
• Maltoporin, or sugar porins (n=18,S=22)
• Nucleoside-specific porin (n=12,S=16)
• Outer membrane phospholipase A1(n=12,S=16)
• TonB-dependent receptors and their plug domain. They are ligand-gated outer membrane channels (n=22,S=24), including cobalamin transporter BtuB, Fe(III)-pyochelin receptor FptA, receptor FepA, ferric hydroxamate uptake receptor FhuA, transporter FecA, and pyoverdine receptor FpvA
• Outer membrane protein OpcA family (n=10,S=12) that includes outer membrane protease OmpT and adhesin/invasin OpcA protein
• Outer membrane protein G porin family (n=14,S=16)

Note: n and S are, respectively, the number of beta-strands and the "shear number"[19] of the beta-barrel

• Trimeric autotransporter (n=12,S=12)
• Outer membrane efflux proteins, also known as trimeric outer membrane factors (n=12,S=18) including TolC and multidrug resistance proteins
• MspA porin (octamer, n=S=16) and α-hemolysin (heptamer n=S=14) . These proteins are secreted.