Ethyl acetate

Ethyl acetate (systematically ethyl ethanoate, commonly abbreviated EtOAc, ETAC or EA) is the organic compound with the formula CH3CO2CH2CH3, simplified to C4H8O2. This colorless liquid has a characteristic sweet smell (similar to pear drops) and is used in glues, nail polish removers, and in the decaffeination process of tea and coffee. Ethyl acetate is the ester of ethanol and acetic acid; it is manufactured on a large scale for use as a solvent.[5]

Ethyl ethanoate
Names
IUPAC name
Ethyl acetate
Systematic IUPAC name
Ethyl ethanoate
Other names
  • Acetic ester
  • Acetic ether
  • Ethyl ester of acetic acid
Identifiers
3D model (JSmol)
Beilstein Reference
 506104
ChEBI
ChEMBL
ChemSpider
ECHA InfoCard 100.005.001
E number E1504 (additional chemicals)
Gmelin Reference
 26306
KEGG
RTECS number
  • AH5425000
UNII
CompTox Dashboard (EPA)
InChI
  • InChI=1S/C4H8O2/c1-3-6-4(2)5/h3H2,1-2H3 Y
    Key: XEKOWRVHYACXOJ-UHFFFAOYSA-N Y
  • InChI=1/C3H8O2/c1-3-6-4(2)5/h3H2,1-2H3
    Key: XEKOWRVHYACXOJ-UHFFFAOYAD
SMILES
  • O=C(OCC)C
Properties
C4H8O2
Molar mass 88.106 g·mol−1
Appearance Colorless liquid
Odor Ether-like, fruity[1]
Density 0.902 g/cm3
Melting point −83.6 °C (−118.5 °F; 189.6 K)
Boiling point 77.1 °C (170.8 °F; 350.2 K)
Solubility in water
 8.3 g/100 mL (at 20 °C)
Solubility in ethanol, acetone, diethyl ether, benzene Miscible
log P 0.71[2]
Vapor pressure 73 mmHg (9.7 kPa) at 20 °C[1]
Acidity (pKa) 25
−54.10×10−6 cm3/mol
1.3720
Viscosity 426 μPa·s (0.426 cP) at 25 °C
Structure
1.78 D
Hazards
Occupational safety and health (OHS/OSH):
Main hazards
  • Flammable (F),
  • Irritant (Xi)
GHS labelling:
Pictograms
 [3]
Signal word
 Danger
Hazard statements
 H225, H319, H336[3]
Precautionary statements
 P210, P233, P240, P305+P351+P338, P403+P235[3]
NFPA 704 (fire diamond)
1
3
0
Flash point −4 °C (25 °F; 269 K)
Explosive limits 2.0–11.5%[1]
Lethal dose or concentration (LD, LC):
LD50 (median dose)
 11.3 g/kg, rat
LC50 (median concentration)
 16,000 ppm (rat, 6 h)
12,295 ppm (mouse, 2 h)
1600 ppm (rat, 8 h)[4]
LCLo (lowest published)
 21 ppm (guinea pig, 1 h)
12,330 ppm (mouse, 3 h)[4]
NIOSH (US health exposure limits):
PEL (Permissible)
 TWA 400 ppm (1400 mg/m3)[1]
REL (Recommended)
 TWA 400 ppm (1400 mg/m3)[1]
IDLH (Immediate danger)
 2000 ppm[1]
Related compounds
  • Methyl acetate,
  • Propyl acetate,
  • Butyl acetate
Related compounds
Supplementary data page
Ethyl acetate (data page)
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Y verify (what is YN ?)
Infobox references

Production and synthesis

Ethyl acetate was first synthesized by the Count de Lauraguais in 1759 by distilling a mixture of ethanol and acetic acid.[6]

In 2004, an estimated 1.3 million tonnes were produced worldwide.[5][7] The combined annual production in 1985 of Japan, North America, and Europe was about 400,000 tonnes. The global ethyl acetate market was valued at $3.3 billion in 2018.[8]

Ethyl acetate is synthesized in industry mainly via the classic Fischer esterification reaction of ethanol and acetic acid. This mixture converts to the ester in about 65% yield at room temperature:

CH3CO2H + CH3CH2OH → CH3CO2CH2CH3 + H2O

The reaction can be accelerated by acid catalysis and the equilibrium can be shifted to the right by removal of water.

It is also prepared in industry using the Tishchenko reaction, by combining two equivalents of acetaldehyde in the presence of an alkoxide catalyst:

2 CH3CHO → CH3CO2CH2CH3

Silicotungstic acid is used to manufacture ethyl acetate by the alkylation of acetic acid by ethylene:[9]

C2H4 + CH3CO2H → CH3CO2C2H5


Uses

Ethyl acetate is used primarily as a solvent and diluent, being favored because of its low cost, low toxicity, and agreeable odor.[5] For example, it is commonly used to clean circuit boards and in some nail varnish removers (acetone is also used). Coffee beans and tea leaves are decaffeinated with this solvent.[10] It is also used in paints as an activator or hardener. Ethyl acetate is present in confectionery, perfumes, and fruits. In perfumes it evaporates quickly, leaving the scent of the perfume on the skin.

Ethyl acetate is an asphyxiant for use in insect collecting and study.[11] In a killing jar charged with ethyl acetate, the vapors will kill the collected insect quickly without destroying it. Because it is not hygroscopic, ethyl acetate also keeps the insect soft enough to allow proper mounting suitable for a collection.

Laboratory uses

In the laboratory, mixtures containing ethyl acetate are commonly used in column chromatography and extractions.[12] Ethyl acetate is rarely selected as a reaction solvent because it is prone to hydrolysis, transesterification, and condensations.

Occurrence in wines

Ethyl acetate is the most common ester in wine, being the product of the most common volatile organic acid – acetic acid, and the ethyl alcohol generated during the fermentation. The aroma of ethyl acetate is most vivid in younger wines and contributes towards the general perception of "fruitiness" in the wine. Sensitivity varies, with most people having a perception threshold around 120 mg/L. Excessive amounts of ethyl acetate are considered a wine fault.

Reactions

Ethyl acetate is only weakly Lewis basic, like a typical carboxylic acid ester.

Ethyl acetate hydrolyses to give acetic acid and ethanol. Bases accelerate the hydrolysis, which is subject to the Fischer equilibrium mentioned above. In the laboratory, and usually for illustrative purposes only, ethyl esters are typically hydrolyzed in a two-step process starting with a stoichiometric amount of a strong base, such as sodium hydroxide. This reaction gives ethanol and sodium acetate, which is unreactive toward ethanol:

CH3CO2C2H5 + NaOH → C2H5OH + CH3CO2Na

In the Claisen condensation, anhydrous ethyl acetate and strong bases react to give ethyl acetoacetate:[13]

Preparation of ethyl acetoacetate.

Safety

The LD50 for rats is 5620 mg/kg,[14] indicating low acute toxicity. Given that the chemical is naturally present in many organisms, there is little risk of toxicity.

Overexposure to ethyl acetate may cause irritation of the eyes, nose, and throat. Severe overexposure may cause weakness, drowsiness, and unconsciousness.[15] Humans exposed to a concentration of 400 ppm in 1.4 mg/L ethyl acetate for a short time were affected by nose and throat irritation.[16] Ethyl acetate is an irritant of the conjunctiva and mucous membrane of the respiratory tract. Animal experiments have shown that, at very high concentrations, the ester has central nervous system depressant and lethal effects; at concentrations of 20,000 to 43,000 ppm (2.0–4.3%), there may be pulmonary edema with hemorrhages, symptoms of central nervous system depression, secondary anemia and liver damage. In humans, concentrations of 400 ppm cause irritation of the nose and pharynx; cases have also been known of irritation of the conjunctiva with temporary opacity of the cornea. In rare cases exposure may cause sensitization of the mucous membrane and eruptions of the skin. The irritant effect of ethyl acetate is weaker than that of propyl acetate or butyl acetate.[17]

References
  1. NIOSH Pocket Guide to Chemical Hazards. "#0260". National Institute for Occupational Safety and Health (NIOSH).
  2. "ethyl acetate MSDS".
  3. Record of Ethyl acetate in the GESTIS Substance Database of the Institute for Occupational Safety and Health, accessed on 7 December 2020.
  4. "Ethyl acetate". Immediately Dangerous to Life or Health Concentrations (IDLH). National Institute for Occupational Safety and Health (NIOSH).
  5. Riemenschneider, Wilhelm; Bolt, Hermann M. "Esters, Organic". Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. doi:10.1002/14356007.a09_565.pub2.
  6. Parker, Joseph (1832). "The Edinburgh Encyclopaedia". The Edinburgh Encyclopaedia. 5.
  7. Dutia, Pankaj (August 10, 2004). "Ethyl Acetate: A Techno-Commercial Profile" (PDF). Chemical Weekly: 184. Retrieved 2009-03-21.
  8. ""Global Ethyl Acetate Market to be valued at $3.3 billion in 2018" reports Visiongain". Visiongain. 2019-09-05. Retrieved 2019-09-05.
  9. Misono, Makoto (2009). "Recent progress in the practical applications of heteropolyacid and perovskite catalysts: Catalytic technology for the sustainable society". Catalysis Today. 144 (3–4): 285–291. doi:10.1016/j.cattod.2008.10.054.
  10. ico.org Archived 2007-04-29 at the Wayback Machine
  11. Littledyke, M.; Cherrett, J. M. (June 1976). "Direct ingestion of plant sap from cut leaves by the leaf-cutting ants Atta cephalotes (L.) and acromyrmex octospinosus (reich) (Formicidae, Attini)". Bulletin of Entomological Research. 66 (2): 205–217. doi:10.1017/S0007485300006647. ISSN 1475-2670.
  12. Tan, Wei Wen; Wu, Bin; Wei, Ye; Yoshikai, Naohiko (2018). "Copper and Secondary Amine-Catalyzed Pyridine Synthesis from O-Acetyl Oximes and α,β-Unsaturated Aldehydes". Organic Syntheses. 95: 1–14. doi:10.15227/orgsyn.095.0001.
  13. Inglis, J. K. H.; Roberts, K. C. (1926). "Ethyl Acetoacetate". Org. Synth. 6: 36. doi:10.15227/orgsyn.006.0036.
  14. Hazard Ethyl Acetate MSDS "Ethyl Acetate MSDS Number: E2850".
  15. Mackison, F. W.; Stricoff, R. S.; Partridge, L. J. Jr., eds. (January 1981). NIOSH/OSHA – Occupational Health Guidelines for Chemical Hazards. DHHS (NIOSH) Publication No. 81–123. Washington, DC: U.S. Government Printing Office.
  16. Clayton, G.D.; Clayton, F.E., eds. (1993–1994). Patty's Industrial Hygiene and Toxicology. Volumes 2A, 2B, 2C, 2D, 2E, 2F: Toxicology (4th ed.). New York, NY: John Wiley & Sons. p. 2981.
  17. Encyclopedia of Occupational Health and Safety, Geneva, Switzerland: International Labour Office, 1983, p. 782
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.