non-corrosive
(adjective)
That does not cause corrosion.
Examples of non-corrosive in the following topics:
-
Effective Disinfection
- A perfect disinfectant would offer full microbiological sterilisation, without harming humans and would also be non-corrosive.
- It would also be inexpensive and non-corrosive.
- Some disinfectants have a wide spectrum and kill many different types of microorganisms, while others kill a smaller range of disease-causing organisms but are preferred for other instances (they may be non-corrosive, non-toxic, or inexpensive).
-
Types of Disinfectants
- These alcohols are non-corrosive but can be a fire hazard.
- Alcohol is only partly effective against most non-enveloped viruses (such as hepatitis A), and is not at all effective against fungal and bacterial spores.
- Typically, quats do not exhibit effectiveness against difficult to kill non-enveloped viruses such as norovirus, rotavirus, or polio virus.
-
Binary Acids
- Binary acids are one of two classes of acids, the second being oxoacids (or oxyacids), which consist of hydrogen, oxygen, and a third element, which is often a non-metal.
- It is a highly corrosive, strong mineral acid with many industrial uses.
-
Corrosion
- Corrosion is commonly discussed in reference to metals, which corrode electrochemically.
- In a corrosion system, the metal being corroded acts as the anode of a short-circuited electrochemical cell:
- How susceptible a particular metal is to corrosion can be determined by its reduction potential.
- Corrosion is a common nuisance with real impact.
- This photo of the Nandu River Iron Bridge in Hainan, China displays evidence of damage by corrosion.
-
Preventing Corrosion
- Preventing corrosion reduces both the economic and safety-related damages associated with the process.
- It follows, then, that we can prevent corrosion by removing one of these essential conditions.
- Corrosion of the sacrificial zinc results in its oxidation; the iron is reduced, which renders it cathodic and inhibits its corrosion.
- As long as the tin coating remains intact, corrosion is not possible.
- Anodization is another surface treatment that protects against corrosion.
-
Oxides
- For example, aluminum foil develops a thin skin of Al2O3 (called a passivation layer) that protects the foil from further corrosion.
- Two independent pathways for corrosion of elements are hydrolysis and oxidation by oxygen.
- The combination of water and oxygen is even more corrosive.
- As mentioned above, a well-known example is aluminum foil, which is coated with a thin film of aluminium oxide that passivates the metal, slowing further corrosion.
- Metals tend to form basic oxides, non-metals tend to form acidic oxides, and amphoteric oxides are formed by elements near the boundary between metals and non-metals (metalloids).
-
Urethra
- Its lining is composed primarily of non-keratinized stratified squamous epithelium, which becomes transitional near the bladder.
- The mucuous membranes are especially important for protecting the urethral tissues from the corrosive effects of urine.
-
Titanium, Chromium, and Manganese
- Titanium, chromium and manganese are 3d transition metals notably used to add corrosion-resistance, durability, and lightness to steel.
- It has a low density, is corrosion-resistant, and has a silver color.
- Stainless steel is highly resistant to corrosion and discoloration.
- Manganese phosphating is used as a treatment for rust and corrosion on steel.
- Titanium is one of the least dense, strong, and corrosion-resistant elements.
-
Aluminum
- Aluminum is resistant to corrosion due to the phenomenon of passivation.
- Aluminum is the most widely used non-ferrous metal.
-
Separating the wheat from the chaff
- If a company's claims seem too good to be true they probably are (particularly if the company is situated in a traditionally non-green industry or its product portfolio is filled with goods that aren't green).
- Even bamboo, which is often billed as a green alternative to everything from building materials to textiles, uses hazardous chemicals in its processing (e.g. sodium hydroxide, a corrosive chemical used in drain cleaners and carbon disulphide – both chemicals are rarely recaptured and reused after processing).