Skip directly to search Skip directly to A to Z list Skip directly to page options Skip directly to site content

GYPSUM

ICSC: 1215

Calcium sulfate dihydrate
CaSO4• 2H2O
Molecular mass: 172.2
ICSC # 1215
CAS # 13397-24-5
RTECS # MG2360000
October 26, 2004 Validated

TYPES OF HAZARD/ EXPOSURE

ACUTE HAZARDS/ SYMPTOMS

PREVENTION

FIRST AID/
FIRE FIGHTING

FIRE Not combustible.

In case of fire in the surroundings: use appropriate extinguishing media.
EXPLOSION


EXPOSURE


•INHALATION Cough.
Local exhaust or breathing protection.
Fresh air, rest.
•SKIN

Rinse and then wash skin with water and soap.
•EYES Redness. Pain.
Safety spectacles.
First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then take to a doctor.
•INGESTION
Do not eat, drink, or smoke during work.
Rinse mouth.

SPILLAGE DISPOSAL

STORAGE

PACKAGING & LABELLING

Sweep spilled substance into containers; if appropriate, moisten first to prevent dusting. Personal protection: P1 filter respirator for inert particles.


ICSC: 1215 Prepared in the context of cooperation between the International Programme on Chemical Safety & the Commission of the European Communities (C) IPCS CEC 1994. No modifications to the International version have been made except to add the OSHA PELs, NIOSH RELs and NIOSH IDLH values.

GYPSUM

ICSC: 1215

I

M

P

O

R

T

A

N

T


D

A

T

A

PHYSICAL STATE; APPEARANCE:
WHITE CRYSTALLINE POWDER OR LUMPS .

PHYSICAL DANGERS:


CHEMICAL DANGERS:


OCCUPATIONAL EXPOSURE LIMITS:
TLV: (as total dust containing no asbestos and <1 % crystalline silica) 10 mg/m3 as TWA; (ACGIH 2004).
MAK: (as respirable fraction of the aerosol, without fibers) 6 mg/m3; (DFG 2004).
OSHA PEL: TWA 15 mg/m3 (total) TWA 5 mg/m3 (resp)
NIOSH REL: TWA 10 mg/m3 (total) TWA 5 mg/m3 (resp)
NIOSH IDLH: N.D. See: IDLH INDEX


ROUTES OF EXPOSURE:


INHALATION RISK:
A nuisance-causing concentration of airborne particles can be reached quickly when dispersed, especially if powdered.

EFFECTS OF SHORT-TERM EXPOSURE:
May cause mechanical irritation.

EFFECTS OF LONG-TERM OR REPEATED EXPOSURE:
Lungs may be affected by repeated or prolonged exposure to dust particlesif crystalline silica is present.

PHYSICAL
PROPERTIES

Melting point: (see Notes) 100-150°C
Density: 2.3
g/cm3
Solubility in water, g/100 ml at 25°C: 0.24

ENVIRONMENTAL
DATA


N O T E S

Gypsum is the natural form of the product and may contain crystalline silica. CAS 10101-41-4 refers to Calcium sulfate precipitate, and CAS 7778-18-9 refers to Calcium sulfate anhydrous. The apparent melting point caused by loss of crystal water is given. Melting point for the anhydrous form is 1450°C.

ADDITIONAL INFORMATION



ICSC: 1215 GYPSUM
(C) IPCS, CEC, 1994
IMPORTANT LEGAL NOTICE: Neither NIOSH, the CEC or the IPCS nor any person acting on behalf of NIOSH, the CEC or the IPCS is responsible for the use which might be made of this information. This card contains the collective views of the IPCS Peer Review Committee and may not reflect in all cases all the detailed requirements included in national legislation on the subject. The user should verify compliance of the cards with the relevant legislation in the country of use. The only modifications made to produce the U.S. version is inclusion of the OSHA PELs, NIOSH RELs and NIOSH IDLH values.
Top