LEAD BIS(DIMETHYLDITHIOCARBAMATE)
ICSC: 1545 |
Lead dimethyldithiocarbamate Bis(dimethylcarbamodithioato-S,S') lead Ledate Methyl ledate C6H12N2PbS4 / ((CH3)2NCS•S)2Pb Molecular mass: 447.6 ICSC # 1545 | CAS # 19010-66-3 RTECS # OF8850000 October 27, 2004 Validated |
TYPES OF HAZARD/ EXPOSURE | ACUTE HAZARDS/ SYMPTOMS | PREVENTION | FIRST AID/ |
FIRE | Combustible. Gives off irritating or toxic fumes (or gases) in a fire. | NO open flames. | Powder, water spray, foam, carbon dioxide. |
EXPLOSION | |||
EXPOSURE | |||
INHALATION | Local exhaust or breathing protection. | Fresh air, rest. | |
SKIN | Protective gloves. | Remove contaminated clothes. Rinse and then wash skin with water and soap. | |
EYES | Safety goggles. | First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then take to a doctor. | |
INGESTION | See EFFECTS OF LONG-TERM OR REPEATED EXPOSURE. | Do not eat, drink, or smoke during work. Wash hands before eating. | Rinse mouth. Refer for medical attention. |
SPILLAGE DISPOSAL | STORAGE | PACKAGING & LABELLING | ||
Personal protection: P2 filter respirator for harmful particles. Sweep spilled substance into sealable containers; if appropriate, moisten first to prevent dusting. | Separated from food and feedstuffs . | |||
|
LEAD BIS(DIMETHYLDITHIOCARBAMATE) | ICSC: 1545 |
I |
| |||
PHYSICAL |
| |||
ENVIRONMENTAL | ||||
N O T E S | ||||
Health effects of exposure to the substance have not been investigated adequately. Environmental effects from the substance have not been investigated. |
ADDITIONAL INFORMATION | |||||
|
IMPORTANT LEGAL NOTICE: | Neither NIOSH, the CEC or the IPCS nor any person acting on behalf of NIOSH, the CEC or the IPCS is responsible for the use which might be made of this information. This card contains the collective views of the IPCS Peer Review Committee and may not reflect in all cases all the detailed requirements included in national legislation on the subject. The user should verify compliance of the cards with the relevant legislation in the country of use. The only modifications made to produce the U.S. version is inclusion of the OSHA PELs, NIOSH RELs and NIOSH IDLH values. |
- Page last reviewed: July 22, 2015
- Page last updated: July 1, 2014
- Content source: