www.infonet-biovision.org 201205 - Milk and Dairy products

Milk and Dairy products

Clean milk production				Marketing of milk
Milk value addition: butter, cheese, yoghurt				Information Source Links

Clean milk production

Milk

Milk is highly perishable, it easily contract diseases. It has a high protein content making it a suitable medium for bacteria growth. For these reasons clean milk production practices are inevitable. It is advisable that farmers observe the following areas in order to produce clean and quality milk for human consumption.

1. The Cow

Milk for human consumption should be from

Cows in good health. That is the cow should be free from zoonotic diseases e.g. Brucellosis and Tuberculosis. Cows should be free from Mastitis
Cows free from drugs. The farmer should always ensure the drug administered to the animal is out of it's system as per the manufacturer's instructions
Feed the cow should be clean free from disease causing organisms. Cows should not be fed on feeds, pastures or weeds that may cause milk tainting (poor smell in milk) this may include feeds with Mexican Marigold, high levels of fish mills or poultry droppings
Restrain to tie the animal, if necessary. Troublesome animals should have their tails tied.

2. Milk parlour

The milk parlour (dairy) should be kept clean. If possible it should have a cement floor for easy cleaning. For large herds it is necessary to have a movable parlour to avoid bacterial and micro-organisms build up on the parlour location
It should be cleaned after every milking
Should be free from bad smell (odour)
Provides clean water ad-lib for animals to drink
If feeds are to be given during milking provide a feed trough

3. Milking Utensils

Use aluminium or stainless steel utensils
When washing, rinse the excess milk with cold water, then wash hot water plus detergents (soap). Scrub with a good washing material or brush. Rinse with cold water and place them on rack to dry. (The rack should be in on open place where direct sunlight can reach)
Utensils store should be clean and well ventilated

Using right utensils for hygienic milk handling

4. The Milker

The milker should be healthy and clean. He/she should maintain short nails and hair (for ladies with long hair let them cover it when milking)
Ensure the milker washers his hands with soap (detergents) and warm clean water before milking.
Never smoke during milking time
Milk quickly and completely without interruptions

5. Milking

Clean the udder and wipe with a clean cloth before milking (advisable to have a cloth for each animal if not many).
Check for mastitis with a strip cap.
Milking should be done quickly and efficiently without interruptions in either the cow or milker. Strip all the milk from the udder of the animal to avoid mastitis.
Do not pull the teats but squeeze them. After milking do not forget to apply milking jelly and dip the teats in iodine solution before releasing the animal
Always milk the healthy animals first while those with mastitis and other disease later. (Do not mix clean milk with contaminated milk).

6. Milk handling

Immediately after milking filter the milk through a clean muslin cloth and sieve. The two should be washed thoroughly and dried after every milking period. Move milk into a clean cold room for storage if not sold or transported immediately.
Transport milk in the morning for household consumption should be boiled immediately and returned to the cold storage.

back to Index

Milk value addition: butter, cheese, yoghurt

BUTTER

Butter is obtained by separation of the milk and subsequent churning of the cream. It contains a minimum of 80% butterfat. Butter can be made from fresh or sour cream. One litre of cream makes 300 to 400 g butter.

How to make butter

If the cream is fresh:

Heat the milk/cream to 80 o to 90°C
Cool it quickly, such as in running water, to 18°C
Ripen by adding 50 ml (3 tablespoons) of sour butter milk or starter culture. Stir this into the milk or cream. Cover container and leave for 24 hours at 18°C

Butter

If you use milk or cream which is sour naturally, you do not require the ripening process.

Churning:

Half fill a churn with sour milk or cream
Churn with regular movement until the pieces of butter are as big as peas and the buttermilk looks watery. Do not let the pieces of butter become one large lump
If there are no pieces of butter after 30 minutes, change the temperature by adding cold or warm water then churn again
For cream do not add more than 25% water
Churning may take 15 to 60 minutes - the time depends on the weather conditions, type of churn, fullness of the churn and fat content of the milk
Carefully remove the pieces of butter from the lid and side with clean cold water. The water with butter will float on top of the butter milk
Pour off the butter milk through a coarse sieve.

Washing:

Wash the butter to remove butter milk. The more butter milk you remove the better the butter
Half fill the churn with clean cold water. Churn for at least 10 minutes
Use a skimmer to remove the pieces of butter floating on the water or wash the butter in a sieve
Sieve the butter and butter milk, put the butter milk on one side, turn the butter over while washing with clean cold water. Do not let the butter become one large lump.

If you wash your butter carefully, you lower the water content and it gives it a longer shelf life. Do not over wash: your butter will have less solids-not-fat and a poor smell.

Salting:

Salt according to taste - 10g per kg of butter. Leave it overnight.

Kneading:

Work (knead) the following day to improve the structure and quality
Wash the work table with clean water
Work the butter with a dump wooden spoon or a dump roller until it has a smooth surface and you can see no more drops of water. As you work, remove any water.

Storage:

Store butter in a cool place, in a pot or wrapped in a greaseproof paper or aluminium foil
Sprinkle a little salt on the surface of butter in a pot; this prevents fungus. You can freeze butter but it becomes rancid quickly after defrosting
Divide the butter into many small parts and defrost only what you need
Do not freeze salted butter; it easily becomes fatty or oily and smells fishy
If you keep butter for too long it tastes rancid and develops fungus.

CHEESE

Cheese

Cheese is the solid part of milk, also known as curd, obtained by separating it from the liquid part (known as whey) by a chemical reaction. Curds are separated from the whey by adding an acid, bacteria culture and/or starter (rennet). Cheese can be described according to its texture as hard, semi-hard or soft or it can be described according to extent of maturing as fresh or ripened.

How to make cheese

There are several recipes to making cheese. Here one of them.

To make cheese you need:

Good quality milk:

with a low bacteria content
from healthy cows: do not use milk from cows with mastitis or other diseases
milk which does not contain antibiotics
do not use colostrum

Clean equipment:

make sure you clean and sterilize your milking utensils
rinse you utensils thoroughly in clean water.

To make cheese follow these steps:

1. Use fresh whole milk. Reduce the fat content by allowing the milk to stand for about one hour, and then skim off the top layer.

2. Heat the milk to about 85°C to destroy most of the bacteria present and also to increase yield through the precipitation of the whey protein.

3. Dilute lemon juice with an equal quantity of clean water so that the lemon can be distributed uniformly. Add about 30 ml (about 3 tablespoons) of lemon juice per litre of milk. Stir the milk while carefully adding the lemon juice. The curd precipitates almost immediately.

4. Continue stirring for about three minutes after adding the lemon juice.

5. Allow the curd to settle for 15 minutes. Separate the curds from the whey by draining through a sieve or a cloth (use a cotton cloth folded twice).

6. While draining the whey, stir the curd to prevent excess matting (coagulation).

7. Add salt to the curd at the rate of about 4 g (about a level tea spoon) per 100ml of curd and mix thoroughly. The amount of salt may be varied to cater for different consumer tastes and preferences.

8. Transfer the curd to a mould lined with cheese cloth. The mould may be cylindrical or square shaped and may be made from metal, plastic or wood.

9. Cover the curd by folding over the cheese cloth. Fit a clean wooden board, cut to neatly inside the mould, to enable the curd to be pressed.

10. Press the curd overnight using metal weights placed on top of the wooden shape. Press with twice the weight of the cheese (so, for every 1 kg cheese use 2 kg press). Press for 1 to 2 hours then take the cheese out of the mould.

11. Store the cheese as it is or cut it into suitably sized pieces for sale.

12. Coat the cheese with a thin film of butter to enhance the appearance.

13. Ripen the cheese on clean wooden shelves for at least 4 weeks at a temperature of 12 to 16°C. During the ripening take the cheese off the shelves every three days, put vinegar on a cloth and wipe the cheese. This prevents fungi. The longer you ripen the cheese the stronger the flavour.

FERMENTED CHEESE (MALA)

This is milk that has undergone the fermentation process due to introduction of a specific bacterium either from a commercial culture or from by adding a small amount from a previous batch of fermented milk. The process described below is based on a traditional process.

How to make mala

1. Use good quality milk, i.e. free from antibiotics and preservatives, not adulterated.

2. If making sweetened cultured milk, add sugar at the rate of 20 to 25 kg per 500 litres (40 to 50 g per 1 litre).

3. Heat the milk to 92 to 95°C for 3 to 5 minutes or 85°C for 30 minutes or just bring to the boil.

4. Cool to 22 to 25°C (warm room temperature).

5. Inoculate with a commercial fermented milk culture or mix with a small amount of fermented milk.

6. Incubate at 22 - 25°C (warm room temperate) for 16 to 18 hours.

7. Cool to 20°C (just cool to the touch) in 30 minutes.

8. In case of flavoured cultured milk, add flavour and colour.

9. Stir until smooth.

10. Pack at 20°C.

11. Refrigerate for 10 to 12 hours to help recover thickness lost during stirring.

12. Distribute for consumption and/or sale.

YOGHURT

Yoghurt is a form of fermented milk whereby fermentation is achieved through the introduction of specific "friendly" bacteria into milk under very carefully controlled temperature and environmental conditions. The source of bacteria can be a small amount of plain live yoghurt bought from the shop or one may obtain a commercial starter culture.

How to make plain yoghurt

1. Use about 5 litres of good quality milk, i.e. free from antibiotics and preservatives, not adulterated.

2. Bring the milk to 85°C over a stove and keep it there for two minutes (or just boil for two minutes) to kill any undesirable micro organisms.

3. Pour the milk into a tall, sterile (rinsed with boiling water) container and allow to cool to 43°C (just warm to touch with the back of the hand).

4. Take about half a cup of plain yoghurt (bought from the shop) and warm it slightly, i.e. to the same temperature as the milk.

5. Mix the warmed yoghurt with the milk and cover tightly.

6. Put the mixture in a constantly warm place (e.g. food basket) at 43°C (just warm to the touch) and leave it for six hours.

7. Remove and leave it for about 30 minutes to cool to room temperature.

8. Add flavour and colour if required while stirring gently.

9. Pack into sterile containers.

10. Store in the fridge for 10 to 12 hours.

11. Distribute for consumption and/or sale.

Fruit can be added to plain yoghurt to make a tasty, refreshing and healthy snack.

How to prepare the yogurt culture

Boil 50 ml of milk and allow it to cool to room temperature
Take one ampoule of commercial yogurt culture and add to the milk
Keep the milk at a hot room temperature (37°C) for 12 to 16 hours

To make fruit yogurt (10 x 100ml):

Take 1 litre of milk and heat a little but do not boil
Add the milk powder and sugar
Stir the above mixture in a food mixer
When dissolved, heat the milk to 85°C (keep milk just below boiling point)
Then allow the milk to cool to room temperature
Add 10 ml of prepared yoghurt culture (see above) and mix gently
Take 100 ml size paper cups and add 25 gm of chopped fruit
Fill cups with milk solution
Keep the cups in an incubator at 42°C for six hours
After 6 hours transfer the cups to the refrigerator and chill for 6 to 8 hours
The fruit yogurt is now ready for sale or consumption
Store at 5°C.

back to Index

Marketing of milk

The dairy industry is based mostly on smallholder milk production and informal traders. Generally informal milk outlets absorb most of the milk from smallholder farmers accounting for over 86% of the total milk sold, while formal market handle 14% of all the total milk produced. Brokers, traders/hawkers, transporters, co-operatives and farmer groups are the most important participants at the rural markets. Cooperatives remain the main channel for collecting milk destined to the formal market. Kenya is among the few countries in the region that have recognized the critical role played by the informal players made significant efforts to main streaming them into the national economy. A draft policy, the new Dairy Development Policy is awaiting parliament approval. This policy openly acknowledges the role of informal milk markets in the development of the sector and will help to legitimize small-scale milk traders, subject to them being trained and certified in milk hygiene. Currently there are over 1,500 licensed informal milk traders in the country.

The Kenyan milk market is liberalized and competition in milk processing and marketing has increased significantly in the industry. Over 40 private and dairy co-operative processors have been licensed to process and market milk and milk products. The industry has a processing capacity of 2.5 million litres per day. The Kenya Cooperative Creameries (KCC) is estimated to have a processing capacity of 1.2 million litres of milk per day and the other processors combined have a processing capacity of about 1.3 million litres of milk per day. Production of high value milk products such as milk powder, fermented milk and butter for export is encouraged.

Dairy cooperatives have played an important role in the development of the Kenyan dairy sector as markets have become competitive and farmers have to be efficient in order to access markets for their dairy products. The power of group marketing is seen in the way organized groups can enforce market contracts and measure and monitor quantities and quality of goods and services. The Kenyan dairy cooperatives are a success story and have helped achieve stability in smallholder dairy milk marketing. Cooperatives enable farmers to access subsidized inputs and credit, provide a safety milk outlet during peak production provision of technical support and other services required for milk production. For isolated areas, cooperatives serve the crucial function of bulking and marketing. Due to the alternative market outlets offered by farmer co-operatives, market prices tend to stabilize, production per cow improves and jobs are created.

Export market for dairy products

Kenya has potential to export dairy products, having the largest and well-developed dairy herd in Sub-Saharan Africa. Indeed, Kenya and Sudan are the largest Sub-Saharan Africa dairy producers accounting for 47% of the total cow milk produced, with Kenya having a market share of 24% (CBS 2003). Kenyan exports of milk products have been on the increase from KShs 117.5 million to KShs 140.6 million in 1998 to 2002 respectively, while total value of import has declined from KShs 353 million to KShs 135 million in 1998 to 2002 respectively. Kenyan dairy products are currently being exported to Zambia, Tanzania, Uganda, Democratic Republic of Congo, Rwanda, Burundi and Saudi Arabia among other countries, while the imports are mainly from the European Union and East African Region.

Exports from Kenya enjoy preferential access to world markets under a number of special access and duty reduction programmes. These include regional markets (EAC, COMESA), EU-African-Caribbean-Pacific/Lome Convention and the African Growth & Opportunity Act (AGOA). Kenya is a member of most major international and regional intellectual property conventions ? the World Intellectual Property Organization (WIPO), the African Regional Industrial Property Organization, the Paris Convention on the Protection of Industrial Property, and the Berne Convention on the Protection of Literary and Artistic Works. His creates an enabling environment for growth of dairy sector.

Legal and regulatory framework

The dairy industry in Kenya is supported by an elaborate legal and regulatory framework. The main regulatory body in the dairy industry is the Kenya Dairy Board (KDB) and has the responsibility of developing, promoting and regulating the dairy industry. The Kenya Bureau of Standards is the statutory body charged with enforcement of standards and certification of quality standards of all products and services in the country.

Supporting structures

The dairy industry in Kenya is supported by a well-established dairy cattle breeding programme for the major dairy cattle breeds (Friesian, Ayrshire, Guernsey and Jersey). The breeding programme is underpinned by centralized performance recording spearheaded by the Kenya Stud Book and Dairy Recording Services of K, which operate under the KLBO, which is a farmer organization. Artificial Insemination (AI) plays an important role in development of the dairy sub-sector. The AI services have largely been privatized to provide an opportunity for investment by the private sector. The Central Artificial Insemination (CAIS) is a government corporation that is mandated to process, storage and distribution of semen and plays a crucial role in the progeny testing of dairy bulls in the country.

The Kenyan government has continued to create and provide an enabling environment for investors in the country. There exists a number of guaranteed investor friendly arrangements such as the Export Processing Zones (EPZ) program which offers attractive incentives to export-oriented investors and EPZ Authority to provide one stop-shop service for facilitation and aftercare. The Investment Promotion Centre (IPC) promotes all other investment in Kenya including in Manufacturing under Bond (MUB) program while the Tax Remission for Export Office (TREO) is a program for intermittent imports for export production. There exists generous investment and capital allowances, bilateral investment and trade agreements.

The Constitution of Kenya provides guarantees against expropriation of private property. In addition, capital repatriation, remittance of dividends and interest are guaranteed to foreign investors under the Foreign Investment Protection Act (FIPA). Kenya as a member of MIGA (Multilateral Investment Guarantee Agency) provides investors with an opportunity to insure their investment in Kenya against a wide range of non-commercial risks. Kenya is also a member of the African Trade Insurance Agency (ATI), a multilateral export credit and political risk agency for COMESA member states as well as the International Council for Settlement of investment Disputes (ICSID).

back to Index

Information Source Links

Government of Kenya. (2004). Strategy for Revitalizing Agriculture 2004-2014. Ministry of Agriculture and Ministry of Livestock and Fisheries Development. Nairobi, Kenya.
Karanja AM (2003). The dairy industry in Kenya: the post-liberalization agenda. Proc. Dairy industry stakeholders workshop held in Nairobi, Kenya (27th August 2002).

back to Index