Java Data Types
Java Data Types
As explained in the previous chapter, a variable in Java must be a specified data type:
Example
int myNum = 5;
// Integer (whole number)
float myFloatNum = 5.99f;
// Floating point number
char myLetter = 'D';
// Character
boolean
myBool = true; // Boolean
String myText = "Hello";
// String
Run example »
Data types are divided into two groups:
- Primitive data types - includes
byte,short,int,long,float,double,booleanandchar - Non-primitive data types - such as String, Arrays and Classes (you will learn more about these in a later chapter)
Primitive Data Types
A primitive data type specifies the size and type of variable values, and it has no additional methods.
There are eight primitive data types in Java:
| Data Type | Size | Description |
|---|---|---|
| byte | 1 byte | Stores whole numbers from -128 to 127 |
| short | 2 bytes | Stores whole numbers from -32,768 to 32,767 |
| int | 4 bytes | Stores whole numbers from -2,147,483,648 to 2,147,483,647 |
| long | 8 bytes | Stores whole numbers from -9,223,372,036,854,775,808 to 9,223,372,036,854,775,807 |
| float | 4 bytes | Stores fractional numbers from 3.4e−038 to 3.4e+038. Sufficient for storing 6 to 7 decimal digits |
| double | 8 bytes | Stores fractional numbers from 1.7e−308 to 1.7e+038. Sufficient for storing 15 decimal digits |
| boolean | 1 bit | Stores true or false values |
| char | 2 bytes | Stores a single character/letter or ASCII values |
Numbers
Primitive number types are divided into two groups:
Integer types stores whole numbers, positive or negative (such as 123 or -456), without decimals.
Valid types are byte, short, int
and long. Which type you should use, depends on the numeric value.
Floating point types represents numbers with a fractional part,
containing one or more decimals. There are two types: float and double.
Even though there are many numeric types in Java, the most used for numbers
are int (for whole numbers) and double (for floating point numbers). However, we will describe them all as you continue to
read.
Integer Types
Byte
The byte data type can store whole numbers
from -128 to 127. This can be used instead of int or other integer types to
save memory when you are certain that the value will be within -128 and 127:
Short
The short data type can store whole numbers from -32768 to 32767:
Int
The int data type can store whole numbers from -2147483648 to 2147483647. In general, and in our tutorial, the int data type is
the preferred data type when we create variables with a numeric value.
Long
The long data type can store whole numbers from -9223372036854775808 to 9223372036854775807. This is used when int is not large enough to store the value. Note that you should end the value with an "L":
Floating Point Types
You should use a floating point type whenever you need a number with a decimal, such as 9.99 or 3.14515.
Float
The float data type can store fractional numbers from 3.4e−038 to 3.4e+038. Note that you should end the value with an "f":
Double
The double data type can store fractional numbers from 1.7e−308 to 1.7e+038. Note that you should end the value with a "d":
Use float or double?
The precision of a floating point value indicates how many digits the value can have
after the decimal point.
The precision of float is only six or seven
decimal digits, while double variables have a precision
of about 15 digits. Therefore it is safer to use double for most calculations.
Scientific Numbers
A floating point number can also be a scientific number with an "e" to indicate the power of 10:
Example
float f1 = 35e3f;
double d1 = 12E4d;
System.out.println(f1);
System.out.println(d1);
Run example »
Booleans
A boolean data type is declared with the boolean keyword and can only take the values true or false:
Example
boolean isJavaFun = true;
boolean isFishTasty = false;
System.out.println(isJavaFun); // Outputs true
System.out.println(isFishTasty); // Outputs false
Run example »
Boolean values are mostly used for conditional testing, which you will learn more about in a later chapter.
Characters
The char data type is used to store a
single character. The character must be
surrounded by single quotes, like 'A' or 'c':
Alternatively, you can use ASCII values to display certain characters:
Example
char a = 65, b = 66, c = 67;
System.out.println(a);
System.out.println(b);
System.out.println(c);
Run example »
Tip: A list of all ASCII values can be found in our ASCII Table Reference.
Strings
The String data type is used to store a sequence of characters (text). String values must be surrounded by double quotes:
The String type is so much used and integrated in Java, that some call it "the special ninth type".
A String in Java is actually a non-primitive data type, because it refers to an object. The String object has methods that is used to perform certain operations on strings. Don't worry if you don't understand the term "object" just yet. We will learn more about strings and objects in a later chapter.
Non-Primitive Data Types
Non-primitive data types are called reference types because they refer to objects.
The main difference between primitive and non-primitive data types are:
- Primitive types are predefined (already defined) in Java. Non-primitive types are created by the programmer and
is not defined by Java (except for
String). - Non-primitive types can be used to call methods to perform certain operations, while primitive types cannot.
- A primitive type has always a value, while non-primitve types can be
null. - A primitive type starts with a lowercase letter, while non-primitive types starts with an uppercase letter.
- The size of a primitive type depends on the data type, while non-primitive types have all the same size.
Examples of non-primitive types are Strings, Arrays, Classes, Interface, etc. You will learn more about these in a later chapter.
