How to Apply Weakness and Resistance in the Pokémon Card Game

This is a step-by-step guide on how to set up a match, and then how to apply resistance and weakness in the Pokémon T.C.G. (Trading Card Game).

Part 1
Part 1 of 2:

Setting Up the Field

  1. Image titled Apply Weakness and Resistance in the Pokémon Card Game Step 1
    1
    Know the types of cards. In Pokémon T.C.G., there are 4 main types of cards in a deck:
    • Support Card: This card typically features a person. You can only play one per turn.
    • Item Card: These items can have a wide variety of effects. You can play as many as you'd like in one turn.
    • Pokémon Card: These vary between Basic, Stage 1, and Stage. 2. For a Pokémon card to come into play, you must play a Basic Card first. You can play a Stage 1 or 2 Pokémon only if you have the appropriate previous Stage card.
      • The requirements for the "evolution" are found in the upper left-hand corner below the Stage Level (Basic, 1, or 2).
      • If you have an image that matches the required Pokémon, then you can evolve into that Pokémon (once per Pokémon per turn).
    • Energy Card: Each of these have a different symbol that corresponds to their type. You can play one energy card per turn.
    • You will need to use only Energy cards and Pokémon cards to understand these instructions.
  2. Image titled Apply Weakness and Resistance in the Pokémon Card Game Step 2
    2
    Make sure that you have the following before you can begin:
    • 2 complete Pokémon card decks (60 cards per deck).
    • Status Tokens and Coin (both come with pre-made decks).
    • Playmat or designated sides of a playable surface (desk, table, etc.).
    Advertisement
  3. Image titled Apply Weakness and Resistance in the Pokémon Card Game Step 3
    3
    Have each player shuffle their decks. All cards are drawn from the top of the deck. The deck needs to have all cards face down.
  4. Image titled Apply Weakness and Resistance in the Pokémon Card Game Step 4
    4
    Draw 7 cards for your hand. Make sure that the other player cannot view your hand at any time.
  5. Image titled Apply Weakness and Resistance in the Pokémon Card Game Step 5
    5
    Decide whether you want to do a 4 prize card game or a 6 prize card game. The only difference between these is the length of the game, with 4 prize cards being a shorter game and 6 being longer.
  6. Image titled Apply Weakness and Resistance in the Pokémon Card Game Step 6
    6
    Draw the prize cards (either 4 or 6 depending on your answer to Step 3). Place these face down. Prize cards are always placed face down (with the card logo face up).
    • When drawing cards from your deck, place your prize cards on the left-hand side of your play mat.
    • Typically these are displayed in 2 columns, but any method of displaying prize cards is acceptable as long as you can access any card at any time (i.e. the cards aren't covering each other).
  7. Image titled Apply Weakness and Resistance in the Pokémon Card Game Step 7
    7
    Set up your team. Check to see if you have any Basic Pokémon cards. This will be visible in the upper left-hand corner of the playing card. You must choose one Basic Pokémon card to be your Active Pokémon. If you have other Basic Pokémon, you can place up to 5 on your bench.
  8. Image titled Apply Weakness and Resistance in the Pokémon Card Game Step 8
    8
    Begin the game once each player has set up their Prize Cards, Active Pokémon, and Bench Pokémon.
    9. Advertisement
Part 2
Part 2 of 2:

Playing Your Turn

  1. Image titled Apply Weakness and Resistance in the Pokémon Card Game Step 9
    1
    Begin your turn.
  2. Image titled Apply Weakness and Resistance in the Pokémon Card Game Step 10
    2
    Examine your Active Pokémon. Pick an attack to perform. Make sure that you have the required energy cards attached to your Active Pokémon to be able to do the attack.
  3. Image titled Apply Weakness and Resistance in the Pokémon Card Game Step 11
    3
    Know that for every attack, there will be at least one symbol. These symbol(s) describe the following:
    • The type of energy is required. This is dictated by the image and color of the symbol.
    • Number energy cards are required. This is dictated by the number of times the symbol appears next to the attack.
  4. Image titled Apply Weakness and Resistance in the Pokémon Card Game Step 12
    4
    Look at the opponent's Active Pokémon. They are placed side by side to make the comparison easier.
  5. Image titled Apply Weakness and Resistance in the Pokémon Card Game Step 13
    5
    Look at Weakness and Resistance. Weakness and Resistance are based on two primary components:
    • The type of move the Active Pokémon performing the attack is using.
    • The weakness and resistance of the Active or Bench Pokémon being attacked.
  6. Image titled Apply Weakness and Resistance in the Pokémon Card Game Step 14
    6
    Notice the Pokémon's type. The Attacking Pokémon's move Type is dictated by the symbols next to the attack.
    • If the attack has only one symbol, it is of only one type.
    • If the attack has more than one type of symbol, it can have more than one types.
  7. Image titled Apply Weakness and Resistance in the Pokémon Card Game Step 15
    7
    Decide on an attack. For example, in this instance, the attack used is Flamethrower. This attack requires 3 total energy, where two of them must be Fire Type energies.
    • If you see a white symbol with a black star in the middle, this is called Colorless energy. This energy requirement can be met by any color energy card.
    • In this instance, a Grass Energy was used to meet this requirement.
  8. Image titled Apply Weakness and Resistance in the Pokémon Card Game Step 16
    8
    Find out whether the Pokémon being attacked has any resistance or weaknesses to your type of attack. Look at the Pokémon being attacked. At the bottom of the card, there is a silver bar labeled with the words Weakness and Resistance.
    • In this case, look at the Weakness of this Pokémon. It shows a Fire Type energy and the X2 symbol next to it. This means that this Pokémon is weak to Fire-type attacks, and the damage received from those attacks is doubled.
  9. Image titled Apply Weakness and Resistance in the Pokémon Card Game Step 17
    9
    Look at the Resistance. In this case, the space next to the word Resistance is blank. This means that this Pokémon has no resistance to any attacks.
    • If there was a Resistance, the format would be similar to the Weakness. It would show the symbol or type of moves this Pokémon is resistant to, and a fraction to show how much the damage is reduced. This damage reduction is usually 1/2X or half of the total damage from the attacker.
  10. Image titled Apply Weakness and Resistance in the Pokémon Card Game Step 18
    10
    Perform the attack. In this case, the attack used is a Fire/Colorless type attack to the Grass-type Pokémon. This Pokémon has a weakness to Fire Type attacks, so it will receive double the damage.
    • Since Flamethrower normally does 60 damage, now it has been increased to 120 damage. If the Pokémon was resistant to Fire-type moves, the damage done would decrease from 60 to only 30 damage.
  11. Image titled Apply Weakness and Resistance in the Pokémon Card Game Step 19
    11
    Remember that weakness and resistance are almost always applicable. The only time a weakness or resistance is not applied is when a specific Pokémon's move directly says to not include it in the description below the name of the attack.
    12. Advertisement

Warnings

  • If you do not have any Basic Pokémon in your hand, this is called a Mulligan. You must reshuffle all of your cards into your deck, then start again at Step 4.
    ⧼thumbs_response⧽
Advertisement

You Might Also Like

Know If Pokémon Cards Are Fake
How to
Know If Pokémon Cards Are Fake
Play With Pokémon Cards
How to
Play With Pokémon Cards
Value Your Pokémon Cards
How to
Value Your Pokémon Cards
Make a Pokémon CardHow to Make Your Own Custom Pokémon Card
Tell if a Pokemon Card Is First EditionBase Set Pokémon Card Values (First Edition, Shadowless, & Unlimited)
Trade Pokemon with John GBA Lite
How to
Trade Pokemon with John GBA Lite
Organize Pokémon Cards
How to
Organize Pokémon Cards
Sell Your Pokémon Cards
How to
Sell Your Pokémon Cards
Build a Pokémon Deck
How to
Build a Pokémon Deck
Get Rare Pokémon Cards
How to
Get Rare Pokémon Cards
Collect Pokémon Cards
How to
Collect Pokémon Cards
Get Pokemon Cards GradedHow to Have Your Pokémon Cards Professionally Graded
Evolve Pokémon in Pokémon TCG
How to
Evolve Pokémon in Pokémon TCG
Value and Sell a Pokémon Card
How to
Value and Sell a Pokémon Card
Advertisement

References

  1. Pokémon T.C.G. Online (https://www.pokemon.com/us/pokemon-tcg/play-online/)

About This Article

wikiHow is a “wiki,” similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, 19 people, some anonymous, worked to edit and improve it over time. This article has been viewed 16,570 times.
4 votes - 55%
Co-authors: 19
Updated: January 25, 2021
Views: 16,570
Categories: Pokemon Card Games
Advertisement