If you are interested in beekeeping and want to increase the number of bees in your apiary, you may want to attract wild bees using a bait hive or bait box. A bait hive is a way of providing a new home for swarming bees and setting up a new colony. By understanding when bees swarm and what they look for in a new shelter, you can increase your chances of attracting bees to settle in your bee box.

Part 1
Part 1 of 3:

Preparing Your Bait Box

  1. 1
    Get your bait box ready at the beginning of swarm season. In most regions of the United States, swarm season coincides with spring, and the best time to set up your bait box is towards the beginning when bees are beginning to swarm and search for new homes.[1]
    • In New York, swarm season goes from May to June. In Maryland, it begins in April. In the South, it begins earlier, and as early as February in Florida.[2]
    • Get in touch with your local beekeeping community if you aren’t sure when swarm season begins in your area.
  2. 2
    Use a sturdy box with a cavity 40 liters (or 1.4 feet) by volume. Swarms usually will not choose boxes with cavities any smaller than this, but will sometimes accept a larger box. There’s no need to design a box that exceeds 100 liters (26.4 US gal).
    • The choice of material can vary without changing the effectiveness of the bait box. Plywood is a relatively cheap and suitable option.
    • It’s possible to use a sturdy cardboard for the exterior if you want a cheap and lightweight option. Be careful if you choose to use cardboard, as it will not be as sturdy as a box with a wooden exterior, and it should only be used in dry climates.[3]
    Advertisement
  3. 3
    Create a circular entrance near the floor of the hive, cut 1.25 inches in diameter. The entrance should be able 2 square inches by area.[4]
    • Place a piece of wire mesh over the entrance to prevent birds and rodents from entering while allowing bees to come and go freely.
  4. 4
    Include an old frame from a healthy hive. Bees love to live in places where other bees have successfully lived before. One danger of using an old frame is the potential of wax moths. The frame can be protected by applying a product known as B401 (also called BT or Bacillus Thuringiensis), which kills wax moth larvae as they try to feed on the frames or combs.
    • A frame of drawn comb is sometimes used to attract swarms and provide an area for the queen to lay if she has mated, but this increases the dangers of wax moths. Check the frames regularly and consider applying a wax moth preventive if you use drawn comb.
  5. 5
    Make sure the upper part of the bait box is snug and dry. Seal any cracks that could allow sunlight or water to enter the box.
    • Duct tape can be used to seal any minor cracks or misalignments if needed.
  6. 6
    Use a swarm lure to attract scouts to investigate your box. Swarm lures are concoctions designed to attract a swarm by enticing the bees with odors that are pleasing to them or mimic their natural communication scents.
    • Lemongrass essential oil is often recommended as a natural swarm lure, but products designed specifically as swarm lures are likely to be more effective.[5]
    • You can also purchase synthetic pheromones that attract bees by giving the illusion of a previously-occupied beehive.
  7. Advertisement
Part 2
Part 2 of 3:

Choosing a Location for Your Bait Box

  1. 1
    Place the bait box near an established feral hive. Swarming occurs when a large hive divides its population, so if you can find a location near an existing, healthy hive, you’ll be more likely to attract scout bees.
    • If you already have your own bee colonies, you can position a bait box near them to avoid losing any population when your colonies divide and swarm.
  2. 2
    Choose a well-shaded area that is easily visible. Bait boxes left in direct sunlight will usually be abandoned. Pick a location that’s easily visible both to make it easier for scouts to notice and to make it easier for you to monitor.
  3. 3
    Position the box several feet above the ground. This helps keep the box dry, visible, and away from pests and robbers. Some sources recommend keeping the box 15 feet above the ground, but you can place it lower as long as you keep it elevated, dry, and somewhere you can easily inspect and retrieve it. Make sure the box is in an isolated area where other animals and people can't access it.[6]
    • Using a hive stand as a way of elevating the box is often sufficient if you don’t have the means to attach a box to a tree or otherwise elevate it higher.
  4. Advertisement
Part 3
Part 3 of 3:

Setting Up and Inspecting Your Bait Box

  1. 1
    Carefully position the box in a way that makes it easy to retrieve later. If you’re placing it on top of a stand or attaching it to a tree, attach it firmly enough not to move, but able to be easily removed later. If you choose to place the box in a tree, be careful handling the box especially if you’re using a ladder, as the box can be awkward to work with.
    • If you use a wooden box with a detachable top, try inserting the nails so that a bit of the head is sticking up. This makes it easier to remove the top when it comes time to move the bees.
  2. 2
    Look for flight around the entrance to the box. This is an indicator that bees are either scouting your bee box or have settled in. If you don’t see any bees carrying pollen, give the box a few more days to allow time to see if a swarm has moved in.
    • If bees are carrying pollen, it usually means that a swarm has decided to move in, since scouts do not carry pollen while searching for new homes. This can be the best indicator that your bait box has been successful at attracting a swarm.
  3. 3
    Let the bees get settled in the box before moving them. It takes a few days after the initial scouts arrive for the entire swarm to move in, and several more days for the swarm to get fully settled. Avoid moving the bait box too early, which could cause the bees to abandon the box and search for a home elsewhere.
    • Some sources recommend waiting at least two weeks after bees have moved into a bait box to transfer them to a permanent hive.[7]
  4. 4
    After bees have settled in, transfer them to a permanent hive. This should be done early in the season so the colony has time to store pollen and honey for winter.
    • Move the bait hive a few days at a time so the bees can adjust to the change in location and continue to find their new home easily.
    • When you’re ready, you can transfer any removable frames from the bait hive into the permanent hive and simply dump the bees into the permanent hive. If you do this in a light rain or in the evening, you’ll increase the chances that they accept the new hive.[8]
  5. Advertisement

Expert Q&A
Did you know you can get expert answers for this article? Unlock expert answers by supporting wikiHow

  • Question
    Will a dirty bee box attract bees?
    David Williams
    David Williams
    Beekeeper & Bee Removal Specialist
    David Williams is a Professional Beekeeper and Bee Removal Specialist with over 28 years of beekeeping experience. He is the Owner of Bzz Bee Removal, a bee removal company based in the San Francisco Bay Area. Bzz Bee Removal locates, captures, and transports bees to local beekeepers to prevent colony collapse disorder.
    David Williams
    Beekeeper & Bee Removal Specialist
    Expert Answer

    Support wikiHow by unlocking this expert answer.

    Not necessarily. Sometimes, bees may not be attracted to dirty frames and may abandon them.
  • Question
    How do I attract bees?
    David Williams
    David Williams
    Beekeeper & Bee Removal Specialist
    David Williams is a Professional Beekeeper and Bee Removal Specialist with over 28 years of beekeeping experience. He is the Owner of Bzz Bee Removal, a bee removal company based in the San Francisco Bay Area. Bzz Bee Removal locates, captures, and transports bees to local beekeepers to prevent colony collapse disorder.
    David Williams
    Beekeeper & Bee Removal Specialist
    Expert Answer

    Support wikiHow by unlocking this expert answer.

    Bees like sweet things and bright colors, so flowers and sugar water work great.
  • Question
    What are some good baits to put in the swarm trap?
    Community Answer
    Community Answer
    Propolis in the back of the box helps the box keep a natural smell to it. That smell will make it seem to the bees like the box is home.
Advertisement

Warnings

  • Avoid using comb with honey in a bait hive, as this is likely to attract ants and does not significantly increase the chances of successfully attracting a swarm.
    ⧼thumbs_response⧽
Advertisement

About This Article

David Williams
Co-authored by:
Beekeeper & Bee Removal Specialist
This article was co-authored by David Williams. David Williams is a Professional Beekeeper and Bee Removal Specialist with over 28 years of beekeeping experience. He is the Owner of Bzz Bee Removal, a bee removal company based in the San Francisco Bay Area. Bzz Bee Removal locates, captures, and transports bees to local beekeepers to prevent colony collapse disorder. This article has been viewed 82,297 times.
45 votes - 94%
Co-authors: 8
Updated: July 27, 2021
Views: 82,297
Categories: Beekeeping
Article SummaryX

A bee box is a shelter for bees that you can use to attract new bees to your colony. To attract lots of bees to your bee box, place the box on a stand in a shaded area that's clearly visible, like under a tree. Use a clean, sturdy box with a cavity that’s 40 liters by volume. Make sure you place the box a few feet off of the ground to keep it away from pests and to make it more visible to the bees. If you’re able to find an existing wild hive, place the box near it so the bees are more likely to find it. When you've found a good spot for your bee box, put some chemical swarm lure, lemongrass essential oil, or synthetic pheromones on the box so bees start investigating it. For tips about how to move the box once bees settle into it, keep reading!

Did this summary help you?
Advertisement