A fur coat that has been properly maintained can last for many generations. While the best choice is to have your coat properly maintained by a professional furrier, there are steps that you can take to ensure that your fur coat maintains its luster. This includes cleaning, deodorizing, and conditioning your fur.

Method 1
Method 1 of 3:

Cleaning

  1. 1
    Shake the fur to remove any dirt or debris that has settled onto the coat. Take the coat by the shoulders and, as you would when changing a bedspread, swing the coat out in front of you.
    • You may want to do this outside, or an area of the house that can be easily swept. Once you begin flinging the coat, debris will fly in all directions.
  2. 2
    Hang the fur properly. Furs should always be hung on broad, padded hangers to prevent the shoulders from losing their form. Because of the nature of the fur, it can easily be stretched and deformed.[1]
    • Never fold your fur coat.
    Advertisement
  3. 3
    Brush the fur while it hangs. Using a proper fur brush, begin at the top of the coat and begin working your way to the bottom. Be sure to brush the direction of the hair, and to use small and even strokes as you work a small section at a time. Fur brushes have wider spaced teeth and soft edges, which prevent the brush from damaging the skin of the fur.
    • If you do not have a proper fur brush, you can run your fingers through the fur to help clear-out any dirt or debris.
    • Never brush your fur with a "normal" brush. This will damage the coat as the teeth on a normal brush are too fine.[2]
    • Avoid making long strokes along the length of the coat. This can cause the coat to stretch.
  4. 4
    Remove any light stains by using a homemade solution. Mix 1 part isopropyl alcohol with 1 part water and apply it directly to the stain. Because fur coats are delicate, you should always avoid using any type of cleaner or solvent, and use as little water as possible.
  5. 5
    Rub the stain gently with a white cloth and allow to dry. Do not rinse the solution out, instead, place the coat in a well-ventilated area and allow it to dry thoroughly. The alcohol will prevent any water stains from forming on the coat.
    • Never use heat on a fur coat. Heat will damage the coat and lining.[3]
    • Be gentle as you rub and be careful not to stretch the skin.
    • Be sure to use a white cloth or rag or else you may transfer color to the fur.
  6. 6
    Brush the entire coat with a fur brush once the fur is completely dry. Again, work in the direction of the fur and work small sections at a time.
  7. Advertisement
Method 2
Method 2 of 3:

Conditioning

  1. 1
    Make a conditioning solution. To do this, mix 1 part vinegar with 2 parts olive oil and mix it together thoroughly. The oil will recondition the skin of the coat and help prevent it from drying out and becoming brittle.[4]
    • Flaxseed oil will work as well.
  2. 2
    Remove the lining of the coat. You will be applying the conditioner directly to the skin or pelt, so you will need to remove any lining that may be on the inside of the coat.[5] Typically, these linings are made of leather.
  3. 3
    Condition the coat. Using a clean cloth, dab the solution onto the inside of the coat one section at a time, directly to the skin of the fur. Coats that are dry and brittle may need to be conditioned several times. If the skin hasn't been dried out too harshly, you may be able to restore its soft texture.
    • Do not apply to the fur.
    • Make sure the liner is removed.
  4. 4
    Massage the skin gently. Continue using a clean cloth to rub the conditioner into the skin. This will help the coat absorb the oil. Do not overwork areas that are particularly dry. Instead, try conditioning the area again once the coat has dried.
    • Coats that have not been conditioned may be stiff and brittle.
  5. 5
    Hang the fur properly and allow to dry. It will take a few days before the vinegar has evaporated and the oil has properly been absorbed by the skin.[6] When the coat no longer smells of vinegar, it is ready to be worn.
    • Remember, furs should always be hung on broad, padded hangers to prevent the shoulders from losing their form.[7]
  6. Advertisement
Method 3
Method 3 of 3:

Removing Odor

  1. 1
    Hang the fur in a vinyl garment bag. Be sure to use a garment bag that can be sealed so that it is as close to airtight as possible.
    • Never use a garment bag when storing your coat for long periods of time. It prevents the skin from breathing.[8]
    • If the skin of a fur coat is not allowed to breathe, it can develop mold or mildew.
    • Remember, furs should always be hung on broad, padded hangers to prevent the shoulders from losing their form.[9]
  2. 2
    Fill a small container with ground coffee.[10] The container should be small enough to sit at the bottom of the garment bag; while at the same time, be large enough to hold at least a ½ cup (32 g) of ground coffee. Do not seal the container.
  3. 3
    Seal the coffee inside the bag with the fur. Be careful when setting the container at the bottom of the garment bag. Since it really isn't designed to be holding anything but a flat article of clothing, chances are there will be spillage. Simply do your best to minimize the mess.
    • You can put the coffee in a brown paper lunch bag and fold it up, but it will take quite a bit longer for any odor to be absorbed.
  4. 4
    Check the coat after 1 day. Depending on the type of odor that you are trying to eliminate--smoke, mildew, etc.,--it may be gone in as little as 24-hours.[11]
  5. 5
    Stir the coffee grounds. If the odor hasn't been removed in 24-hours, simply stir the coffee grounds and allow the coat to continue to sit in the garment bag for another day.[12]
    • Be sure to check daily.
  6. 6
    Remove the coat from the garment bag and store properly. Once the odor has been eliminated from your coat, be sure to remove it from the garment bag so that it can breathe and be stored properly.
    • Storage fur coats in areas that are about 45 °F (7 °C).[13]
    • Avoid cedar closets or chests. Cedar oil will harm your fur coat.[14]
    • Avoid heat. Heat will dry out the skin of the fur.[15]
    • Never fold your fur coat.
  7. Advertisement

Expert Q&A
Did you know you can get expert answers for this article? Unlock expert answers by supporting wikiHow

  • Question
    What is the best process for removing black mold smell from a mink coat?
    Michelle Driscoll, MPH
    Michelle Driscoll, MPH
    Founder, Mulberry Maids
    Michelle Driscoll is the Owner of Mulberry Maids, which is based in Fort Collins, Colorado. With five years of experience, her business specializes in cleaning homes and small offices. She holds a Masters in Public Health from the Colorado School of Public Health. Additionally, Mulberry Maids has an A+ rating from the Better Business Bureau.
    Michelle Driscoll, MPH
    Founder, Mulberry Maids
    Expert Answer

    Support wikiHow by unlocking this expert answer.

    Try the method described above using coffee grounds placed in a sealed vinyl garment bag with the fur coat.
  • Question
    How do you remove a red wine stain from a fur coat?
    Michelle Driscoll, MPH
    Michelle Driscoll, MPH
    Founder, Mulberry Maids
    Michelle Driscoll is the Owner of Mulberry Maids, which is based in Fort Collins, Colorado. With five years of experience, her business specializes in cleaning homes and small offices. She holds a Masters in Public Health from the Colorado School of Public Health. Additionally, Mulberry Maids has an A+ rating from the Better Business Bureau.
    Michelle Driscoll, MPH
    Founder, Mulberry Maids
    Expert Answer

    Support wikiHow by unlocking this expert answer.

    For stains on fur, you do not want to use any commercial cleaner or solvent - make a homemade solution of 1 part rubbing alcohol and 1 part water to apply to the stain.
  • Question
    What's the best way to clean wine out of my rabbit fur shawl?
    Community Answer
    Community Answer
    If the wine is still wet, remove the lining if possible and flush the stained area with water until it comes out. Lay it flat to dry and work the area occasionally so the leather side doesn't get stiff. Once dry, brush the fur gently to remove the clumps from where it got wet. If the wine is already dry, take it to a furrier. The furrier can clean it or will give you options to dye the fur so the stain is not visible. If that isn't an option and the fur is white, you might be able to remove the stain with hydrogen peroxide. Apply some lightly to the fur only and let it sit for a few minutes. Gently rinse and repeat this process until clean. (Beware: this may damage the fur, especially if it gets on the leather side.)
Advertisement

Warnings

  • Due to the nature of the coat, do not brush Persian lamb products. Instead, just use the fur pad in the cleaning process so as not to damage the fur.
    ⧼thumbs_response⧽
  • Keep fur coats from getting wet as much as you can. If you do get it wet, shake off as much water as you can before hanging it up to let it dry.[17]
    ⧼thumbs_response⧽
Advertisement

Things You'll Need

  • Fur brush
  • Padded hangers
  • Isopropyl alcohol
  • Olive oil
  • Vinegar

About This Article

Michelle Driscoll, MPH
Co-authored by:
Founder, Mulberry Maids
This article was co-authored by Michelle Driscoll, MPH. Michelle Driscoll is the Owner of Mulberry Maids, which is based in Fort Collins, Colorado. With five years of experience, her business specializes in cleaning homes and small offices. She holds a Masters in Public Health from the Colorado School of Public Health. Additionally, Mulberry Maids has an A+ rating from the Better Business Bureau. This article has been viewed 262,260 times.
52 votes - 82%
Co-authors: 26
Updated: February 10, 2023
Views: 262,260
Article SummaryX

To clean any small or light stains on fur, mix 1 part isopropyl alcohol with 1 part water and rub the solution directly on the affected area. Don’t rinse the solution out. Rather, leave the coat to dry and then brush it with a fur brush. If your fur has an odd odor, hang it in a vinyl garment bag. Then, fill a small container with ground coffee and place it, uncovered, in the bottom of the bag for 24-48 hours. To learn how to condition your fur, keep reading!

Did this summary help you?
Advertisement