Boneless chicken breasts can be very expensive at the grocery store, but with a little practice, you can debone them yourself at home! Whether you need to make boneless skinless chicken breasts, debone skin-on breasts, or debone an already-cooked chicken breast, you can quickly and easily learn this skill in your own kitchen.

Method 1
Method 1 of 3:

Removing the Bone and Skin

  1. 1
    Thaw the chicken. Deboning a frozen or partially-frozen chicken breast is very difficult. Make sure your chicken breast is entirely thawed before beginning to de-bone. You can thaw your chicken by putting it in the refrigerator overnight, putting it in a bowl of water, or using your microwave's defrost setting.
  2. 2
    Put the chicken on a cutting board skin side up. Make sure the cutting board is clean and that the chicken breast doesn’t have wings or leg meat attached to it. If it does, cut it off.[1]
    Advertisement
  3. 3
    Cut lengthwise into the thickest part of the chicken. This will prepare it for splitting and help you find the breastbone quickly. Use a chef’s knife to get the cleanest cuts.[2]
  4. 4
    Peel the skin from the breast. Slide your fingers into the cut you made and pull the skin off the entire chicken breast. You should be able to simply pull it off by hand, but cutting is okay too.[3]
  5. 5
    Find the bone. Look inside the cut to locate the breastbone. Most chicken breasts will have only one bone, which runs lengthwise down the middle of the chicken breast. Sometimes the ribs will still be attached, but you can ignore them--the chicken will come right off the ribs when you cut it away from the bone.[4]
  6. 6
    Cut along one side of the breastbone. Slide your knife into the cut you already made so it’s between the meat and the breastbone. Using a scraping motion with the knife, cut along the bone so that the meat separates from it.[5]
  7. 7
    Cut along the other side and pull the meat off. Repeat the same scraping motion along the other side of the breastbone. If any part of the chicken is still attached to the breast, pull or cut it off.[6] You now have two boneless, skinless chicken breast halves!
  8. 8
    Remove extra skin, fat, and other unwanted parts. If there is any extra skin, fat, tendons, or cartilage remaining on your chicken breast, cut it off. You can throw them away, or keep them along with the bones for homemade chicken stock.[7]
  9. Advertisement
Method 2
Method 2 of 3:

Keeping the Skin On

  1. 1
    Put the thawed chicken on a cutting board, skin side up. Check to make sure the skin doesn’t have quills or tears. You can pull quills out using tweezers or pliers. If the skin is torn, be careful as you work so you don’t enlarge the tear.
  2. 2
    Locate the bone. If you are keeping the skin on, you need to find the bone by turning the chicken over, skin side down, rather than by cutting through it. Find the ends of the breastbone. You can start deboning from either end--whichever end has more bone visible from the outside.[8]
  3. 3
    Slice horizontally between the bone and the chicken. Slide your knife above the breastbone, between the bone and the meat. Work your knife as deeply along the bone as you can, pulling up on the meat with your other hand. Be careful not to slice through the meat![9]
  4. 4
    Pull the meat off the bone. Use your hands to pull the entire breast off the bone. You can use the knife to help, but pulling will prevent you from cutting through the skin. You should have an entire single breast with the skin on.[10]
  5. 5
    Remove any unwanted parts. Cut off any gristle, tendons, or excess folds of skin.[11]
  6. Advertisement
Method 3
Method 3 of 3:

Deboning a Cooked Chicken Breast

  1. 1
    Allow the chicken to cool. Don’t start deboning until your chicken is cool enough to be handled. You can be burned by fat or grease if the chicken is too hot.
  2. 2
    Cut the breast in half lengthwise. Cooked chicken doesn’t stick to the bone as much as raw chicken, so simply cutting the breast in half is sufficient to locate the breastbone. It may simply fall off the bone as you cut![12]
  3. 3
    Trace the knife along each side of the bone. If there is still meat along either side of the breastbone, cut lightly along each side. Don’t cut too hard--if your knife is sharp enough, it could cut right through the bone.
  4. 4
    Pull the meat off each side of the bone. You can use your hands to pull the chicken off in most cases--you’ll get more meat. Using a knife is fine if you need it.[13]
  5. Advertisement

Expert Q&A

  • Question
    How do you get the bone out of a chicken breast?
    Jillian Fae Downing
    Jillian Fae Downing
    Private Event Chef & Chef Educator
    Jillian Fae Downing is a Private Event Chef, Chef Educator, and the Owner of Jillian Fae Chef Services based out of Temecula, California. With 12 years of experience, she specializes in menu planning and menu research and development. Jillian Fae holds an Associate of Science in Culinary Arts from Orange Coast College and a BA in Mass Communication and Media Studies from Arizona State University. She is also a member of the American Culinary Federation and the American Personal and Private Chef Association.
    Jillian Fae Downing
    Private Event Chef & Chef Educator
    Expert Answer
    Try to find the rib bones on the underside of the chicken breasts first. Then, take your boning knife as close to the bone as you can to remove it without removing too much of the flesh of the chicken breast along with it.
Advertisement

Warnings

Advertisement

References

  1. http://dish.allrecipes.com/deboning-a-chicken-breast/
  2. Jillian Fae Downing. Private Event Chef & Chef Educator. Expert Interview. 2 September 2021.
  3. http://dish.allrecipes.com/deboning-a-chicken-breast/
  4. Jillian Fae Downing. Private Event Chef & Chef Educator. Expert Interview. 2 September 2021.
  5. http://dish.allrecipes.com/deboning-a-chicken-breast/
  6. Jillian Fae Downing. Private Event Chef & Chef Educator. Expert Interview. 2 September 2021.
  7. http://dish.allrecipes.com/deboning-a-chicken-breast/
  8. http://eatswritesshoots.com/2014/02/03/how-to-debone-a-chicken-breast-and-leave-the-skin-on/
  9. http://eatswritesshoots.com/2014/02/03/how-to-debone-a-chicken-breast-and-leave-the-skin-on/

About This Article

Jillian Fae Downing
Co-authored by:
Private Event Chef & Chef Educator
This article was co-authored by Jillian Fae Downing. Jillian Fae Downing is a Private Event Chef, Chef Educator, and the Owner of Jillian Fae Chef Services based out of Temecula, California. With 12 years of experience, she specializes in menu planning and menu research and development. Jillian Fae holds an Associate of Science in Culinary Arts from Orange Coast College and a BA in Mass Communication and Media Studies from Arizona State University. She is also a member of the American Culinary Federation and the American Personal and Private Chef Association. This article has been viewed 205,576 times.
2 votes - 100%
Co-authors: 12
Updated: October 21, 2021
Views: 205,576
Article SummaryX

To debone a chicken breast, place the chicken on a cutting board with the skin facing up. Use a chef’s knife to cut lengthwise into the thickest part of the chicken, then use your fingers to peel the skin away from the chicken breast. Slide your knife into the cut you made and use a scraping motion to cut the meat away from one side of the breastbone, then the other. You will then have 2 chicken breast halves. If there are any extra skin, fat, or any other unwanted parts left on the chicken, cut them off to finish preparing the breasts. Read on to learn how to debone a chicken breast while leaving the skin on!

Did this summary help you?
Advertisement