How to Raise Your Bed

Raising your bed can create extra storage space or just make it easier to get in and out of bed. It’s fairly easy to add a little extra height to your bed by purchasing bed risers or making your own from wood. After you get your risers, simply find someone to help you put them on and enjoy your modified bed!

Method 1
Method 1 of 3:

Purchasing Bed Risers

  1. Image titled Raise Your Bed Step 1
    1
    Decide between metal, plastic, and wood bed risers. These are the three main materials that you can buy risers in. Plastic is generally the cheapest, but it might not be as durable. Metal risers and wooden risers both hold a lot of weight and will last. Wooden ones are usually more attractive but may also cost more.[1]
  2. Image titled Raise Your Bed Step 2
    2
    Choose risers that will add the height you want. Risers come in a variety of sizes, usually ranging between 1 inch (2.5 cm) and 12 inches (30 cm). Use measuring tape to determine how much height you want to add to your bed in inches or centimeters. Pick the risers that will give your bed the exact extra lift you want.[2]
    • Some plastic risers can stack on top of each other, which can allow you to customize the height you add if you aren’t finding risers in the exact size you want.
    Advertisement
  3. Image titled Raise Your Bed Step 3
    3
    Get risers that can support the weight of your bed. The packaging should tell you how much weight a riser can support. Remember to add your own weight and the weight of anyone else you might share your bed with to the weight of the mattress. The larger your mattress, the more durable you will want your risers to be.[3]
    • A set of four bed risers often claims to support over 1,000 pounds (450 kg). So in most cases it should not be difficult to find risers that will work for your bed.
  4. Image titled Raise Your Bed Step 4
    4
    Pick risers that will match your room if you will leave them exposed. It’s easy to conceal risers with a bed skirt or long sheets. But if you aren’t going to cover them, make sure you like how they look. Many bed risers are neutral colors that match their surroundings easily. If you want to add an accent color to your room, you can also find risers in brighter shades, like pink, red, and yellow .[4]
    5. Advertisement
Method 2
Method 2 of 3:

Making Your Own Bed Risers

  1. Image titled Raise Your Bed Step 5
    1
    Get four wooden blocks. You can also turn making bed risers into your next DIY project. The easiest and most reliable material to use is wood. Cedar blocks can work particularly well and look nice in your room.[5]
    • You can purchase wooden blocks from many home supply stores, like Home Depot or Lowes.
  2. Image titled Raise Your Bed Step 6
    2
    Saw your blocks to an equal height. Decide how high you want to raise your bed and make sure each one of your risers comes to that height. Saw at the end you want to use as the top of the riser. That way, if you accidentally saw unevenly, the more level side of the block will be able to sit against the floor.[6]
    • When buying wood, ask the retailer to make the blocks the same height for you. They should be able to do it precisely with a power saw if you don’t have one.
  3. Image titled Raise Your Bed Step 7
    3
    Attach felt to the bottoms of your risers. Felt patches will prevent your bed risers from scratching your floor. Simply apply glue to the back of the felt and secure it onto the bottom of your risers.[7]
  4. Image titled Raise Your Bed Step 8
    4
    Drill a 1⁄2 inch (1.3 cm) to 3⁄4 inch (1.9 cm) indent to secure the bedposts. Measure your bedposts to determine how wide they are at the bottom. Then choose a drill bit that can make a small indent in the top of your riser that your bedpost will fit snugly into. This will help hold your bedpost in place and keep your bed frame stable and secure.[8]
    5. Advertisement
Method 3
Method 3 of 3:

Putting on Bed Risers

  1. Image titled Raise Your Bed Step 9
    1
    Get a friend or family member to help you. You will need to lift both your mattress and your bedframe to put on your new risers. Having someone to help you will make the whole process much easier and safer.[9]
  2. Image titled Raise Your Bed Step 10
    2
    Remove the mattress from the bed frame. With your helper, lift the mattress and place it somewhere out of the way. Rest it against a wall to make it easier to lift back up and put on the bed frame when you’re done.[10]
  3. Image titled Raise Your Bed Step 11
    3
    Lift a corner of the frame and guide the bedpost into the riser. Divide these two jobs between you and your helper. Once the bedpost is lined up with the hole or indent in the top of the riser, gently lower the bed frame. Check to make sure the bedpost is firmly in place.[11]
  4. Image titled Raise Your Bed Step 12
    4
    Repeat for all four posts of the bed. Once this process is over, gently shake your bedframe to make sure it is secure. Make sure that none of the risers holds its bedpost insecurely, as this could cause your bed frame to fall.[12]
  5. Image titled Raise Your Bed Step 13
    5
    Put your mattress back on the bed frame. Make sure the risers still seem secure with the weight of the mattress on them. If they are, your newly raised bed should be ready to sleep on. Use the extra space under the bed frame for storage, or simply enjoy having your mattress higher off the ground.
    6. Advertisement

Warnings

  • Use extreme caution if you need to saw your wooden blocks. Never place your hand in the path of the saw while you’re using it, and be sure to wear protective goggles over your eyes.
    ⧼thumbs_response⧽
  • When lifting your mattress and bed frame, keep your back straight and bend at your knees. This can prevent you from pulling or straining your back.
    ⧼thumbs_response⧽
Advertisement

You Might Also Like

Clean a Bed with Baking Soda
How to
Clean a Bed with Baking Soda
Disassemble a Sleep Number Bed
How to
Disassemble a Sleep Number Bed
Make a Hospital CornerHow to Fold Hospital or Military Corners on Your Bed
Make a Bed Neatly
How to
Make a Bed Neatly
Fix a Squeaking Bed Frame
How to
Fix a Squeaking Bed Frame
Make a Hotel Bed
How to
Make a Hotel Bed
Keep a Bed from Moving
How to
Keep a Bed from Moving
Put a Futon Together
How to
Put a Futon Together
How to
Put a Quilt on a Bed
Make a Bed on the Floor
How to
Make a Bed on the Floor
Change Sheets in an Occupied Bed
How to
Change Sheets in an Occupied Bed
Fold a Futon
How to
Fold a Futon
Empty a Waterbed
How to
Empty a Waterbed
Make Your Top Bunk Cool
How to
Make Your Top Bunk Cool
Advertisement

References

  1. ↑ https://dengarden.com/home-improvement/Bed-Risers
  2. ↑ http://www.handicappedequipment.org/how-to-raise-your-bed/
  3. ↑ https://dengarden.com/home-improvement/Bed-Risers
  4. ↑ https://dengarden.com/home-improvement/Bed-Risers
  5. ↑ https://homesteady.com/how-5552892-make-bed-frame-raisers.html
  6. ↑ https://www.diypassion.com/2014/03/20/storage-solution-diy-bed-risers/
  7. ↑ https://homesteady.com/how-5552892-make-bed-frame-raisers.html
  8. ↑ https://www.diypassion.com/2014/03/20/storage-solution-diy-bed-risers/
  9. ↑ https://dengarden.com/home-improvement/Bed-Risers
  1. ↑ https://dengarden.com/home-improvement/Bed-Risers
  2. ↑ https://homesteady.com/how-5903672-raise-bed-storage.html
  3. ↑ https://homesteady.com/how-5903672-raise-bed-storage.html

About This Article

wikiHow Staff
Co-authored by:
wikiHow Staff
wikiHow Staff Writer
This article was co-authored by wikiHow Staff. Our trained team of editors and researchers validate articles for accuracy and comprehensiveness. wikiHow's Content Management Team carefully monitors the work from our editorial staff to ensure that each article is backed by trusted research and meets our high quality standards. This article has been viewed 93,434 times.
58 votes - 76%
Co-authors: 4
Updated: December 29, 2020
Views: 93,434
Categories: Beds
Article SummaryX

The easiest way to raise your bed is to purchase metal, plastic, or wood bed risers that will add the height you want. If you don’t want to buy bed risers, you can make your own by gathering 4 wooden blocks that are the same height and width. Next, glue a piece of felt to the bottom of each block to prevent any scratches to your floor. Then, drill a hole in the center of each riser that your bedpost will fit snugly into. Finally, install the risers by lifting the bed frame one corner at a time, and lowering the bedpost into the hole on the top of each riser. To learn more, like how to put on your bed risers safely and efficiently, read on!

Did this summary help you?
Advertisement