This guide contains step by step instructions on how to change a blown bicycle inner tube while on a bike ride.

Steps

  1. 1
    Prepare a travel bag containing all of the tools and equipment necessary to replace a blown inner tube. In order to assemble this bag, you must determine several things:
    • The size of inner tube that the tire requires. This is often printed on the side of the inner tube or on the side of the tire itself. If you cannot find the size of the inner tube, consult your owner’s manual or manufacturer’s website.
    • The type of valve your tube uses. This is either a Schrader valve or a Presta valve. Schrader valves are found on less expensive or older bikes, while Presta valves are often found on high end racing bikes. A Schrader valve is wider, and looks like the valve found on a car tire, while the Presta valve is much skinnier. The easiest way to determine what valve your inner tube uses is to consult your owner’s manual or manufacturer’s website. If you cannot find this information, ask a local bike shop employee.
      • This information is critical in selecting the bike pump you will bring, because if the valve of the pump does not correspond to the valve of the tire, it will be impossible to inflate the inner tube.
    • The size of wrench that is used to loosen the 4 nuts that hold your bicycle wheel’s axle in the frame. The measurements of these nuts can be found in the owner’s manual or manufacturer’s website. If you cannot find this information, a simple solution is to test out wrenches on the bolt until you find a wrench that is a snug fit to the nut.
      • It is recommended that you bring a set of wrenches, ensuring you will have the right tools for the job.
      • Make sure that if your bike uses metric nuts, you bring a metric set of wrenches and vice versa.
      • A wrench is not necessary if both wheels are equipped with quick release levers.
  2. 2
    Detach the wheel with the blown inner tube using a wrench or your wheel’s quick release lever. This is done easiest with the bike resting upside down, balanced on the seat and the handlebars.[1]
    Advertisement
  3. 3
    Remove the tire from the rim once the wheel is detached from the bike using a tire lever. This is done by pushing the narrow end of the tire lever between the tire and the rim, and then using the lever to lift the edge of the tire over the rim.[2]
    • Caution: Be sure to remove the dust cover from the valve stem, and use extra care when removing the valve stem from the rim.
  4. 4
    Once the tire is off, the inner tube is easily removed from the interior from the tire.
  5. 5
    Partially inflate the new inner tube just enough that the tube forms a circular shape. This makes it easier to fit the tube into the tire.[3]
  6. 6
    Push the tire back into the rim, being sure to match the valve of the inner tube with the valve hole cut into the rim. Without practice, this may be difficult to get the entire tire around the rim. Use the tire lever to assist you.[4]
    • If you are having a great deal of difficulty, ask a fellow biker, as having an extra set of hands can make this task much easier.
  7. 7
    Reattach the wheel by tightening the nuts on the axle and ensuring that the wheel is secured to the frame.[5]
  8. Advertisement

Community Q&A

  • Question
    What do I do if a new inner tube will not pump up?
    RubixGamerHD
    RubixGamerHD
    Community Answer
    The inner tube may not pump up for two reasons: the inner tube has a hole in it or your pump isn't working correctly. If the pump works well in inflating other things, or you can feel air coming out of the pump nozzle, then most likely the pump is fine. That leaves the inner tube. If you still have the receipt, try to return the inner tube to the store and explain that you've just installed it, but it won't inflate.
  • Question
    What do I do if the inner tube is too big?
    Community Answer
    Community Answer
    There is nothing you can do. You will need to buy the right size.
  • Question
    Is there a tubeless tire or solid tube?
    Community Answer
    Community Answer
    Yes, both types are available.
Advertisement

Warnings

  • Although trying to ride on a flat tire may seem like an easy way to bike away from your situation, never ride on your rims or a flat tire. Riding on your rims for even a few feet can cause irreparable damage to your rims. Replacing a quality rim can cost nearly $100.
    ⧼thumbs_response⧽
Advertisement

Things You'll Need

  • A bicycle inner tube of the correct size and with the correct valve (Presta or Schrader).
  • A wrench or wrench set fitted to the 4 nuts that connect the axel of the bicycle wheels to the frame of the bike.
  • A small, lightweight air pump that uses the corresponding valve. This valve needs to be the same type as the valve on the inner tube.
    • Again, make sure that the valves of the air pump and the inner tube match. If they don’t, it will be impossible to inflate the inner tube.
  • 2 tire levers, which will be used to remove the tire from the inner tube.

About This Article

wikiHow is a “wiki,” similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, volunteer authors worked to edit and improve it over time. This article has been viewed 80,532 times.
53 votes - 92%
Co-authors: 5
Updated: December 11, 2019
Views: 80,532
Advertisement