A rabbit's toenails should be clipped about once every one to two months. In the wild, rabbits nails will wear down due to the strain of walking through tough terrain. As house rabbits are generally kept in less taxing environments, their nails will grow too long without regular clipping. You will have to wrap your rabbit in a towel and set it in your lap first. From there, gently clip the tip of each nail. If bleeding occurs, make sure to treat it promptly. If your rabbit is difficult to restrain during toenail clipping, you may want to have a vet clip your rabbit's nails.

Part 1
Part 1 of 3:

Getting Your Rabbit Situated

  1. 1
    Gather your supplies. Your rabbit may become nervous during the trimming process. Therefore, get your supplies together ahead of time. Lay them out around the area where you're going to clip your rabbit's toenails.
    • You will need a pair of nail clippers. You can get clippers specifically made for small animals or you can use a regular pair.
    • You will need some kind of blood stopping powder. In the event you accidentally cut into your rabbit's quick, you will have to apply blood stopping powder. This powder can be purchased online or at a local pet store. Flour and cornstarch can be used as alternatives.
    • You will need an old towel to help restrain your rabbit while you clip.
  2. 2
    Approach your rabbit in a calm fashion. In the wild, rabbits are preyed upon by larger animals. Your rabbit may become startled easily, especially if approached unexpectedly. When you approach your rabbit, speak to it in a calm voice to put it at ease. You want your rabbit to be relaxed going into the nail clipping process.
    • Use soothing, low tones as you speak.
    • Before touching your rabbits, put your hands out so your rabbit can see them. Do not simply grab your rabbit, as this can cause it anxiety.
    Advertisement
  3. 3
    Wrap your rabbit in a towel. You want to make sure your rabbit can't squirm or kick too much during the trimming process. Gently wrap your rabbit in an old towel before you begin trimming its nails.
    • Go slowly as you wrap your rabbit in the towel. Your rabbit may be frightened or squirm slightly. Talk softly to your rabbit throughout the process to keep it calm.
    • Wrap your rabbit loosely. Rabbits dislike being restrained.[1]
    • You do not need to cover your rabbit's head. Just cover its body.
  4. 4
    Place the rabbit on your lap. You want your rabbit to be seated on your lap with its paws exposed. Make sure the rabbit has all four feet somewhere on your lap. Rabbits get nervous if all their feet are not on a solid surface. This may make the clipping experience more stressful for you and your rabbit.[2]
  5. Advertisement
Part 2
Part 2 of 3:

Clipping Your Rabbit's Nails

  1. 1
    Locate the quick. There is a vein located inside each nail known as the quick. If you trim into the quick, this will cause your rabbit to bleed excessively. Make sure you locate the quick before you begin to trim a nail.[3]
    • The quick should be visible to the naked eye if your rabbit has clear claws. It will be a thin pink or red line just inside the nail.
    • If your rabbit has darker paws, try shining a flashlight under the nail. This may make the quick more visible.
  2. 2
    Clip the tip of each nail. You want to keep a safe distance from the quick as you clip your rabbit's nails. You only need to clip the sharp tip of the nail. Never clip into the quick. Work with one nail at a time to assure precision.
    • If your rabbit is particularly nervous, you may have to ask a friend to help. One person can hold and soothe the rabbit, while the other person clips the rabbit's nails.
  3. 3
    Minimize restraint. Rabbits dislike being restrained. Try to avoid holding your rabbit too tightly as you clip its nails. Keep the rabbit seated in your lap and pull it gently against your stomach. If you use too much force to keep your rabbit still, it will become agitated.[4] [5]
    • If your rabbit is squirming too much, it's better to take a break and try again later than to restrain the rabbit too forcefully.
  4. Advertisement
Part 3
Part 3 of 3:

Taking Safety Precautions

  1. 1
    Treat a bleeding nail right away. If you trim into the quick, your rabbit's nail will begin to bleed. You should treat the bleeding promptly to reduce blood loss. You can apply your blood stopping powder to the bleeding nail. Follow instructions on the package. Then, apply pressure with a cotton ball.[6]
    • If bleeding does not stop on its own, you should contact a veterinarian.
  2. 2
    Have your vet trim your rabbit's nails if it won't cooperate. Not all rabbits will allow you to trim their nails. Some rabbits may be too skittish to adequately restrain at home. If you're nervous about trimming your rabbit's nails, take it to a vet. It's better to have a vet trim the nails safely than risk injuring your rabbit.
  3. 3
    Do not place your rabbit on a slippery surface when trimming its nails. It's best to set your rabbit on your lap when you trim its nails. However, if you choose not to, be careful of what surface you use. Avoid a slippery surface. This could cause your rabbit to slide and injure itself during the clipping process.[7]
    • Place a towel down on the surface you choose. This will make the rabbit feel more secure.
  4. Advertisement

Warnings

  • If your rabbit is skittish, it's a good idea to have a vet clip its nails. A rabbit that wriggles and squirms during trimming is more likely to become injured during the process.
    ⧼thumbs_response⧽


Advertisement

About This Article

Pippa Elliott, MRCVS
Co-authored by:
Veterinarian
This article was co-authored by Pippa Elliott, MRCVS. Dr. Elliott, BVMS, MRCVS is a veterinarian with over 30 years of experience in veterinary surgery and companion animal practice. She graduated from the University of Glasgow in 1987 with a degree in veterinary medicine and surgery. She has worked at the same animal clinic in her hometown for over 20 years. This article has been viewed 83,180 times.
21 votes - 95%
Co-authors: 20
Updated: November 13, 2020
Views: 83,180
Categories: Rabbit Grooming
Article SummaryX

To trim rabbit toenails, gently and loosely wrap your rabbit in an old towel, leaving its head uncovered, so that it can’t move around while you’re trimming its toenails. Next, place your rabbit in your lap, making sure its feet are somewhere on your lap too so it feels secure and doesn’t get nervous. Then, trim the sharp tip of its nails with a pair of nail clippers, taking care to avoid the vein inside each known as the quick. If you do accidentally trim the quick, immediately apply blood stopping powder and then pressure with a cotton ball to stop the bleeding. For more help from our Veterinary co-author, including how to figure out if clipping your rabbit’s toenails at the vet might be best, read on!

Did this summary help you?
Advertisement