Alkali metal

Estimated abundances of the chemical elements in the Solar system. Hydrogen and helium are most common, from the Big Bang. The next three elements (lithium, beryllium, and boron) are rare because they are poorly synthesised in the Big Bang and also in stars. The two general trends in the remaining stellar-produced elements are: (1) an alternation of abundance in elements as they have even or odd atomic numbers, and (2) a general decrease in abundance, as elements become heavier. Iron is especially common because it represents the minimum-energy nuclide that can be made by fusion of helium in supernovae.[44]

The Oddo–Harkins rule holds that elements with even atomic numbers are more common that those with odd atomic numbers, with the exception of hydrogen. This rule argues that elements with odd atomic numbers have one unpaired proton and are more likely to capture another, thus increasing their atomic number. In elements with even atomic numbers, protons are paired, with each member of the pair offsetting the spin of the other, enhancing stability.[45][46][47] All the alkali metals have odd atomic numbers and they are not as common as the elements with even atomic numbers adjacent to them (the noble gases and the alkaline earth metals) in the Solar System. The heavier alkali metals are also less abundant than the lighter ones as the alkali metals from rubidium onward can only be synthesised in supernovae and not in stellar nucleosynthesis. Lithium is also much less abundant than sodium and potassium as it is poorly synthesised in both Big Bang nucleosynthesis and in stars: the Big Bang could only produce trace quantities of lithium, beryllium and boron due to the absence of a stable nucleus with 5 or 8 nucleons, and stellar nucleosynthesis could only pass this bottleneck by the triple-alpha process, fusing three helium nuclei to form carbon, and skipping over those three elements.[44]

Spodumene, an important lithium mineral

The Earth formed from the same cloud of matter that formed the Sun, but the planets acquired different compositions during the formation and evolution of the solar system. In turn, the natural history of the Earth caused parts of this planet to have differing concentrations of the elements. The mass of the Earth is approximately 5.98×10²⁴ kg. It is composed mostly of iron (32.1%), oxygen (30.1%), silicon (15.1%), magnesium (13.9%), sulfur (2.9%), nickel (1.8%), calcium (1.5%), and aluminium (1.4%); with the remaining 1.2% consisting of trace amounts of other elements. Due to planetary differentiation, the core region is believed to be primarily composed of iron (88.8%), with smaller amounts of nickel (5.8%), sulfur (4.5%), and less than 1% trace elements.[48]

The alkali metals, due to their high reactivity, do not occur naturally in pure form in nature. They are lithophiles and therefore remain close to the Earth's surface because they combine readily with oxygen and so associate strongly with silica, forming relatively low-density minerals that do not sink down into the Earth's core. Potassium, rubidium and caesium are also incompatible elements due to their large ionic radii.[49]

Sodium and potassium are very abundant in earth, both being among the ten most common elements in Earth's crust;[50][51] sodium makes up approximately 2.6% of the Earth's crust measured by weight, making it the sixth most abundant element overall[52] and the most abundant alkali metal. Potassium makes up approximately 1.5% of the Earth's crust and is the seventh most abundant element.[52] Sodium is found in many different minerals, of which the most common is ordinary salt (sodium chloride), which occurs in vast quantities dissolved in seawater. Other solid deposits include halite, amphibole, cryolite, nitratine, and zeolite.[52] Many of these solid deposits occur as a result of ancient seas evaporating, which still occurs now in places such as Utah's Great Salt Lake and the Dead Sea.[11]^: 69 Despite their near-equal abundance in Earth's crust, sodium is far more common than potassium in the ocean, both because potassium's larger size makes its salts less soluble, and because potassium is bound by silicates in soil and what potassium leaches is absorbed far more readily by plant life than sodium.[11]^: 69

Despite its chemical similarity, lithium typically does not occur together with sodium or potassium due to its smaller size.[11]^: 69 Due to its relatively low reactivity, it can be found in seawater in large amounts; it is estimated that seawater is approximately 0.14 to 0.25 parts per million (ppm)[53][54] or 25 micromolar.[55] Its diagonal relationship with magnesium often allows it to replace magnesium in ferromagnesium minerals, where its crustal concentration is about 18 ppm, comparable to that of gallium and niobium. Commercially, the most important lithium mineral is spodumene, which occurs in large deposits worldwide.[11]^: 69

Rubidium is approximately as abundant as zinc and more abundant than copper. It occurs naturally in the minerals leucite, pollucite, carnallite, zinnwaldite, and lepidolite,[56] although none of these contain only rubidium and no other alkali metals.[11]^: 70 Caesium is more abundant than some commonly known elements, such as antimony, cadmium, tin, and tungsten, but is much less abundant than rubidium.[57]

Francium-223, the only naturally occurring isotope of francium,[58][59] is the product of the alpha decay of actinium-227 and can be found in trace amounts in uranium minerals.[60] In a given sample of uranium, there is estimated to be only one francium atom for every 10¹⁸ uranium atoms.[61][62] It has been calculated that there are at most 30 grams of francium in the earth's crust at any time, due to its extremely short half-life of 22 minutes.[63][64]

The physical and chemical properties of the alkali metals can be readily explained by their having an ns¹ valence electron configuration, which results in weak metallic bonding. Hence, all the alkali metals are soft and have low densities,[5] melting[5] and boiling points,[5] as well as heats of sublimation, vaporisation, and dissociation.[11]^: 74 They all crystallise in the body-centered cubic crystal structure,[11]^: 73 and have distinctive flame colours because their outer s electron is very easily excited.[11]^: 75 The ns¹ configuration also results in the alkali metals having very large atomic and ionic radii, as well as very high thermal and electrical conductivity.[11]^: 75 Their chemistry is dominated by the loss of their lone valence electron in the outermost s-orbital to form the +1 oxidation state, due to the ease of ionising this electron and the very high second ionisation energy.[11]^: 76 Most of the chemistry has been observed only for the first five members of the group. The chemistry of francium is not well established due to its extreme radioactivity;[5] thus, the presentation of its properties here is limited. What little is known about francium shows that it is very close in behaviour to caesium, as expected. The physical properties of francium are even sketchier because the bulk element has never been observed; hence any data that may be found in the literature are certainly speculative extrapolations.[65]

The alkali metals are more similar to each other than the elements in any other group are to each other.[5] Indeed, the similarity is so great that it is quite difficult to separate potassium, rubidium, and caesium, due to their similar ionic radii; lithium and sodium are more distinct. For instance, when moving down the table, all known alkali metals show increasing atomic radius,[72] decreasing electronegativity,[72] increasing reactivity,[5] and decreasing melting and boiling points[72] as well as heats of fusion and vaporisation.[11]^: 75 In general, their densities increase when moving down the table, with the exception that potassium is less dense than sodium.[72] One of the very few properties of the alkali metals that does not display a very smooth trend is their reduction potentials: lithium's value is anomalous, being more negative than the others.[11]^: 75 This is because the Li⁺ ion has a very high hydration energy in the gas phase: though the lithium ion disrupts the structure of water significantly, causing a higher change in entropy, this high hydration energy is enough to make the reduction potentials indicate it as being the most electropositive alkali metal, despite the difficulty of ionising it in the gas phase.[11]^: 75

The stable alkali metals are all silver-coloured metals except for caesium, which has a pale golden tint:[73] it is one of only three metals that are clearly coloured (the other two being copper and gold).[11]^: 74 Additionally, the heavy alkaline earth metals calcium, strontium, and barium, as well as the divalent lanthanides europium and ytterbium, are pale yellow, though the colour is much less prominent than it is for caesium.[11]^: 74 Their lustre tarnishes rapidly in air due to oxidation.[5] They all crystallise in the body-centered cubic crystal structure,[11]^: 73 and have distinctive flame colours because their outer s electron is very easily excited. Indeed, these flame test colours are the most common way of identifying them since all their salts with common ions are soluble.[11]^: 75

All the alkali metals are highly reactive and are never found in elemental forms in nature.[21] Because of this, they are usually stored in mineral oil or kerosene (paraffin oil).[74] They react aggressively with the halogens to form the alkali metal halides, which are white ionic crystalline compounds that are all soluble in water except lithium fluoride (Li F).[5] The alkali metals also react with water to form strongly alkaline hydroxides and thus should be handled with great care. The heavier alkali metals react more vigorously than the lighter ones; for example, when dropped into water, caesium produces a larger explosion than potassium if the same number of moles of each metal is used.[5][75][57] The alkali metals have the lowest first ionisation energies in their respective periods of the periodic table[65] because of their low effective nuclear charge[5] and the ability to attain a noble gas configuration by losing just one electron.[5] Not only do the alkali metals react with water, but also with proton donors like alcohols and phenols, gaseous ammonia, and alkynes, the last demonstrating the phenomenal degree of their reactivity. Their great power as reducing agents makes them very useful in liberating other metals from their oxides or halides.[11]^: 76

The second ionisation energy of all of the alkali metals is very high[5][65] as it is in a full shell that is also closer to the nucleus;[5] thus, they almost always lose a single electron, forming cations.[11]^: 28 The alkalides are an exception: they are unstable compounds which contain alkali metals in a −1 oxidation state, which is very unusual as before the discovery of the alkalides, the alkali metals were not expected to be able to form anions and were thought to be able to appear in salts only as cations. The alkalide anions have filled s-subshells, which gives them enough stability to exist. All the stable alkali metals except lithium are known to be able to form alkalides,[76][77][78] and the alkalides have much theoretical interest due to their unusual stoichiometry and low ionisation potentials. Alkalides are chemically similar to the electrides, which are salts with trapped electrons acting as anions.[79] A particularly striking example of an alkalide is "inverse sodium hydride", H⁺Na⁻ (both ions being complexed), as opposed to the usual sodium hydride, Na⁺H⁻:[80] it is unstable in isolation, due to its high energy resulting from the displacement of two electrons from hydrogen to sodium, although several derivatives are predicted to be metastable or stable.[80][81]

In aqueous solution, the alkali metal ions form aqua ions of the formula [M(H₂O)_n]⁺, where n is the solvation number. Their coordination numbers and shapes agree well with those expected from their ionic radii. In aqueous solution the water molecules directly attached to the metal ion are said to belong to the first coordination sphere, also known as the first, or primary, solvation shell. The bond between a water molecule and the metal ion is a dative covalent bond, with the oxygen atom donating both electrons to the bond. Each coordinated water molecule may be attached by hydrogen bonds to other water molecules. The latter are said to reside in the second coordination sphere. However, for the alkali metal cations, the second coordination sphere is not well-defined as the +1 charge on the cation is not high enough to polarise the water molecules in the primary solvation shell enough for them to form strong hydrogen bonds with those in the second coordination sphere, producing a more stable entity.[82][83]^: 25 The solvation number for Li⁺ has been experimentally determined to be 4, forming the tetrahedral [Li(H₂O)₄]⁺: while solvation numbers of 3 to 6 have been found for lithium aqua ions, solvation numbers less than 4 may be the result of the formation of contact ion pairs, and the higher solvation numbers may be interpreted in terms of water molecules that approach [Li(H₂O)₄]⁺ through a face of the tetrahedron, though molecular dynamic simulations may indicate the existence of an octahedral hexaaqua ion. There are also probably six water molecules in the primary solvation sphere of the sodium ion, forming the octahedral [Na(H₂O)₆]⁺ ion.[66][83]^{: 126–127} While it was previously thought that the heavier alkali metals also formed octahedral hexaaqua ions, it has since been found that potassium and rubidium probably form the [K(H₂O)₈]⁺ and [Rb(H₂O)₈]⁺ ions, which have the square antiprismatic structure, and that caesium forms the 12-coordinate [Cs(H₂O)₁₂]⁺ ion.[84]

The chemistry of lithium shows several differences from that of the rest of the group as the small Li⁺ cation polarises anions and gives its compounds a more covalent character.[5] Lithium and magnesium have a diagonal relationship due to their similar atomic radii,[5] so that they show some similarities. For example, lithium forms a stable nitride, a property common among all the alkaline earth metals (magnesium's group) but unique among the alkali metals.[85] In addition, among their respective groups, only lithium and magnesium form organometallic compounds with significant covalent character (e.g. LiMe and MgMe₂).[86]

Lithium fluoride is the only alkali metal halide that is poorly soluble in water,[5] and lithium hydroxide is the only alkali metal hydroxide that is not deliquescent.[5] Conversely, lithium perchlorate and other lithium salts with large anions that cannot be polarised are much more stable than the analogous compounds of the other alkali metals, probably because Li⁺ has a high solvation energy.[11]^: 76 This effect also means that most simple lithium salts are commonly encountered in hydrated form, because the anhydrous forms are extremely hygroscopic: this allows salts like lithium chloride and lithium bromide to be used in dehumidifiers and air-conditioners.[11]^: 76

Francium is also predicted to show some differences due to its high atomic weight, causing its electrons to travel at considerable fractions of the speed of light and thus making relativistic effects more prominent. In contrast to the trend of decreasing electronegativities and ionisation energies of the alkali metals, francium's electronegativity and ionisation energy are predicted to be higher than caesium's due to the relativistic stabilisation of the 7s electrons; also, its atomic radius is expected to be abnormally low. Thus, contrary to expectation, caesium is the most reactive of the alkali metals, not francium.[68][37]^: 1729[87] All known physical properties of francium also deviate from the clear trends going from lithium to caesium, such as the first ionisation energy, electron affinity, and anion polarisability, though due to the paucity of known data about francium many sources give extrapolated values, ignoring that relativistic effects make the trend from lithium to caesium become inapplicable at francium.[87] Some of the few properties of francium that have been predicted taking relativity into account are the electron affinity (47.2 kJ/mol)[88] and the enthalpy of dissociation of the Fr₂ molecule (42.1 kJ/mol).[89] The CsFr molecule is polarised as Cs⁺Fr⁻, showing that the 7s subshell of francium is much more strongly affected by relativistic effects than the 6s subshell of caesium.[87] Additionally, francium superoxide (FrO₂) is expected to have significant covalent character, unlike the other alkali metal superoxides, because of bonding contributions from the 6p electrons of francium.[87]

All the alkali metals have odd atomic numbers; hence, their isotopes must be either odd–odd (both proton and neutron number are odd) or odd–even (proton number is odd, but neutron number is even). Odd–odd nuclei have even mass numbers, whereas odd–even nuclei have odd mass numbers. Odd–odd primordial nuclides are rare because most odd–odd nuclei are highly unstable with respect to beta decay, because the decay products are even–even, and are therefore more strongly bound, due to nuclear pairing effects.[90]

Due to the great rarity of odd–odd nuclei, almost all the primordial isotopes of the alkali metals are odd–even (the exceptions being the light stable isotope lithium-6 and the long-lived radioisotope potassium-40). For a given odd mass number, there can be only a single beta-stable nuclide, since there is not a difference in binding energy between even–odd and odd–even comparable to that between even–even and odd–odd, leaving other nuclides of the same mass number (isobars) free to beta decay toward the lowest-mass nuclide. An effect of the instability of an odd number of either type of nucleons is that odd-numbered elements, such as the alkali metals, tend to have fewer stable isotopes than even-numbered elements. Of the 26 monoisotopic elements that have only a single stable isotope, all but one have an odd atomic number and all but one also have an even number of neutrons. Beryllium is the single exception to both rules, due to its low atomic number.[90]

All of the alkali metals except lithium and caesium have at least one naturally occurring radioisotope: sodium-22 and sodium-24 are trace radioisotopes produced cosmogenically,[91] potassium-40 and rubidium-87 have very long half-lives and thus occur naturally,[92] and all isotopes of francium are radioactive.[92] Caesium was also thought to be radioactive in the early 20th century,[93][94] although it has no naturally occurring radioisotopes.[92] (Francium had not been discovered yet at that time.) The natural long-lived radioisotope of potassium, potassium-40, makes up about 0.012% of natural potassium,[95] and thus natural potassium is weakly radioactive. This natural radioactivity became a basis for a mistaken claim of the discovery for element 87 (the next alkali metal after caesium) in 1925.[31][32] Natural rubidium is similarly slightly radioactive, with 27.83% being the long-lived radioisotope rubidium-87.[11]^: 74

Caesium-137, with a half-life of 30.17 years, is one of the two principal medium-lived fission products, along with strontium-90, which are responsible for most of the radioactivity of spent nuclear fuel after several years of cooling, up to several hundred years after use. It constitutes most of the radioactivity still left from the Chernobyl accident. Caesium-137 undergoes high-energy beta decay and eventually becomes stable barium-137. It is a strong emitter of gamma radiation. Caesium-137 has a very low rate of neutron capture and cannot be feasibly disposed of in this way, but must be allowed to decay.[96] Caesium-137 has been used as a tracer in hydrologic studies, analogous to the use of tritium.[97] Small amounts of caesium-134 and caesium-137 were released into the environment during nearly all nuclear weapon tests and some nuclear accidents, most notably the Goiânia accident and the Chernobyl disaster. As of 2005, caesium-137 is the principal source of radiation in the zone of alienation around the Chernobyl nuclear power plant.[98] Its chemical properties as one of the alkali metals make it one of the most problematic of the short-to-medium-lifetime fission products because it easily moves and spreads in nature due to the high water solubility of its salts, and is taken up by the body, which mistakes it for its essential congeners sodium and potassium.[99]^: 114

Effective nuclear charge on an atomic electron

The atomic radii of the alkali metals increase going down the group.[72] Because of the shielding effect, when an atom has more than one electron shell, each electron feels electric repulsion from the other electrons as well as electric attraction from the nucleus.[100] In the alkali metals, the outermost electron only feels a net charge of +1, as some of the nuclear charge (which is equal to the atomic number) is cancelled by the inner electrons; the number of inner electrons of an alkali metal is always one less than the nuclear charge. Therefore, the only factor which affects the atomic radius of the alkali metals is the number of electron shells. Since this number increases down the group, the atomic radius must also increase down the group.[72]

The ionic radii of the alkali metals are much smaller than their atomic radii. This is because the outermost electron of the alkali metals is in a different electron shell than the inner electrons, and thus when it is removed the resulting atom has one fewer electron shell and is smaller. Additionally, the effective nuclear charge has increased, and thus the electrons are attracted more strongly towards the nucleus and the ionic radius decreases.[5]

Periodic trend for ionisation energy: each period begins at a minimum for the alkali metals, and ends at a maximum for the noble gases. Predicted values are used for elements beyond 104.

The first ionisation energy of an element or molecule is the energy required to move the most loosely held electron from one mole of gaseous atoms of the element or molecules to form one mole of gaseous ions with electric charge +1. The factors affecting the first ionisation energy are the nuclear charge, the amount of shielding by the inner electrons and the distance from the most loosely held electron from the nucleus, which is always an outer electron in main group elements. The first two factors change the effective nuclear charge the most loosely held electron feels. Since the outermost electron of alkali metals always feels the same effective nuclear charge (+1), the only factor which affects the first ionisation energy is the distance from the outermost electron to the nucleus. Since this distance increases down the group, the outermost electron feels less attraction from the nucleus and thus the first ionisation energy decreases.[72] (This trend is broken in francium due to the relativistic stabilisation and contraction of the 7s orbital, bringing francium's valence electron closer to the nucleus than would be expected from non-relativistic calculations. This makes francium's outermost electron feel more attraction from the nucleus, increasing its first ionisation energy slightly beyond that of caesium.)[37]^: 1729

The second ionisation energy of the alkali metals is much higher than the first as the second-most loosely held electron is part of a fully filled electron shell and is thus difficult to remove.[5]

The reactivities of the alkali metals increase going down the group. This is the result of a combination of two factors: the first ionisation energies and atomisation energies of the alkali metals. Because the first ionisation energy of the alkali metals decreases down the group, it is easier for the outermost electron to be removed from the atom and participate in chemical reactions, thus increasing reactivity down the group. The atomisation energy measures the strength of the metallic bond of an element, which falls down the group as the atoms increase in radius and thus the metallic bond must increase in length, making the delocalised electrons further away from the attraction of the nuclei of the heavier alkali metals. Adding the atomisation and first ionisation energies gives a quantity closely related to (but not equal to) the activation energy of the reaction of an alkali metal with another substance. This quantity decreases going down the group, and so does the activation energy; thus, chemical reactions can occur faster and the reactivity increases down the group.[101]

The variation of Pauling electronegativity (y-axis) as one descends the main groups of the periodic table from the second to the sixth period

Electronegativity is a chemical property that describes the tendency of an atom or a functional group to attract electrons (or electron density) towards itself.[102] If the bond between sodium and chlorine in sodium chloride were covalent, the pair of shared electrons would be attracted to the chlorine because the effective nuclear charge on the outer electrons is +7 in chlorine but is only +1 in sodium. The electron pair is attracted so close to the chlorine atom that they are practically transferred to the chlorine atom (an ionic bond). However, if the sodium atom was replaced by a lithium atom, the electrons will not be attracted as close to the chlorine atom as before because the lithium atom is smaller, making the electron pair more strongly attracted to the closer effective nuclear charge from lithium. Hence, the larger alkali metal atoms (further down the group) will be less electronegative as the bonding pair is less strongly attracted towards them. As mentioned previously, francium is expected to be an exception.[72]

Because of the higher electronegativity of lithium, some of its compounds have a more covalent character. For example, lithium iodide (Li I) will dissolve in organic solvents, a property of most covalent compounds.[72] Lithium fluoride (LiF) is the only alkali halide that is not soluble in water,[5] and lithium hydroxide (LiOH) is the only alkali metal hydroxide that is not deliquescent.[5]

The melting point of a substance is the point where it changes state from solid to liquid while the boiling point of a substance (in liquid state) is the point where the vapour pressure of the liquid equals the environmental pressure surrounding the liquid[103][104] and all the liquid changes state to gas. As a metal is heated to its melting point, the metallic bonds keeping the atoms in place weaken so that the atoms can move around, and the metallic bonds eventually break completely at the metal's boiling point.[72][105] Therefore, the falling melting and boiling points of the alkali metals indicate that the strength of the metallic bonds of the alkali metals decreases down the group.[72] This is because metal atoms are held together by the electromagnetic attraction from the positive ions to the delocalised electrons.[72][105] As the atoms increase in size going down the group (because their atomic radius increases), the nuclei of the ions move further away from the delocalised electrons and hence the metallic bond becomes weaker so that the metal can more easily melt and boil, thus lowering the melting and boiling points.[72] (The increased nuclear charge is not a relevant factor due to the shielding effect.)[72]

The alkali metals all have the same crystal structure (body-centred cubic)[11] and thus the only relevant factors are the number of atoms that can fit into a certain volume and the mass of one of the atoms, since density is defined as mass per unit volume. The first factor depends on the volume of the atom and thus the atomic radius, which increases going down the group; thus, the volume of an alkali metal atom increases going down the group. The mass of an alkali metal atom also increases going down the group. Thus, the trend for the densities of the alkali metals depends on their atomic weights and atomic radii; if figures for these two factors are known, the ratios between the densities of the alkali metals can then be calculated. The resultant trend is that the densities of the alkali metals increase down the table, with an exception at potassium. Due to having the lowest atomic weight and the largest atomic radius of all the elements in their periods, the alkali metals are the least dense metals in the periodic table.[72] Lithium, sodium, and potassium are the only three metals in the periodic table that are less dense than water:[5] in fact, lithium is the least dense known solid at room temperature.[11]^: 75

External video
Reactions of the alkali metals with water, conducted by The Open University

A reaction of 3 pounds (≈ 1.4 kg) of sodium with water

All the alkali metals react vigorously or explosively with cold water, producing an aqueous solution of a strongly basic alkali metal hydroxide and releasing hydrogen gas.[101] This reaction becomes more vigorous going down the group: lithium reacts steadily with effervescence, but sodium and potassium can ignite, and rubidium and caesium sink in water and generate hydrogen gas so rapidly that shock waves form in the water that may shatter glass containers.[5] When an alkali metal is dropped into water, it produces an explosion, of which there are two separate stages. The metal reacts with the water first, breaking the hydrogen bonds in the water and producing hydrogen gas; this takes place faster for the more reactive heavier alkali metals. Second, the heat generated by the first part of the reaction often ignites the hydrogen gas, causing it to burn explosively into the surrounding air. This secondary hydrogen gas explosion produces the visible flame above the bowl of water, lake or other body of water, not the initial reaction of the metal with water (which tends to happen mostly under water).[75] The alkali metal hydroxides are the most basic known hydroxides.[11]^: 87

Recent research has suggested that the explosive behavior of alkali metals in water is driven by a Coulomb explosion rather than solely by rapid generation of hydrogen itself.[106] All alkali metals melt as a part of the reaction with water. Water molecules ionise the bare metallic surface of the liquid metal, leaving a positively charged metal surface and negatively charged water ions. The attraction between the charged metal and water ions will rapidly increase the surface area, causing an exponential increase of ionisation. When the repulsive forces within the liquid metal surface exceeds the forces of the surface tension, it vigorously explodes.[106]

The hydroxides themselves are the most basic hydroxides known, reacting with acids to give salts and with alcohols to give oligomeric alkoxides. They easily react with carbon dioxide to form carbonates or bicarbonates, or with hydrogen sulfide to form sulfides or bisulfides, and may be used to separate thiols from petroleum. They react with amphoteric oxides: for example, the oxides of aluminium, zinc, tin, and lead react with the alkali metal hydroxides to give aluminates, zincates, stannates, and plumbates. Silicon dioxide is acidic, and thus the alkali metal hydroxides can also attack silicate glass.[11]^: 87

Liquid NaK alloy at room temperature

The alkali metals form many intermetallic compounds with each other and the elements from groups 2 to 13 in the periodic table of varying stoichiometries,[11]^: 81 such as the sodium amalgams with mercury, including Na₅Hg₈ and Na₃Hg.[107] Some of these have ionic characteristics: taking the alloys with gold, the most electronegative of metals, as an example, NaAu and KAu are metallic, but RbAu and CsAu are semiconductors.[11]^: 81 NaK is an alloy of sodium and potassium that is very useful because it is liquid at room temperature, although precautions must be taken due to its extreme reactivity towards water and air. The eutectic mixture melts at −12.6 °C.[108] An alloy of 41% caesium, 47% sodium, and 12% potassium has the lowest known melting point of any metal or alloy, −78 °C.[23]

The intermetallic compounds of the alkali metals with the heavier group 13 elements (aluminium, gallium, indium, and thallium), such as NaTl, are poor conductors or semiconductors, unlike the normal alloys with the preceding elements, implying that the alkali metal involved has lost an electron to the Zintl anions involved.[109] Nevertheless, while the elements in group 14 and beyond tend to form discrete anionic clusters, group 13 elements tend to form polymeric ions with the alkali metal cations located between the giant ionic lattice. For example, NaTl consists of a polymeric anion (—Tl⁻—)_n with a covalent diamond cubic structure with Na⁺ ions located between the anionic lattice. The larger alkali metals cannot fit similarly into an anionic lattice and tend to force the heavier group 13 elements to form anionic clusters.[110]

Boron is a special case, being the only nonmetal in group 13. The alkali metal borides tend to be boron-rich, involving appreciable boron–boron bonding involving deltahedral structures,[11]^: 147–8 and are thermally unstable due to the alkali metals having a very high vapour pressure at elevated temperatures. This makes direct synthesis problematic because the alkali metals do not react with boron below 700 °C, and thus this must be accomplished in sealed containers with the alkali metal in excess. Furthermore, exceptionally in this group, reactivity with boron decreases down the group: lithium reacts completely at 700 °C, but sodium at 900 °C and potassium not until 1200 °C, and the reaction is instantaneous for lithium but takes hours for potassium. Rubidium and caesium borides have not even been characterised. Various phases are known, such as LiB₁₀, NaB₆, NaB₁₅, and KB₆.[111][112] Under high pressure the boron–boron bonding in the lithium borides changes from following Wade's rules to forming Zintl anions like the rest of group 13.[113]

Side (left) and top (right) views of the graphite intercalation compound KC₈

Lithium and sodium react with carbon to form acetylides, Li₂C₂ and Na₂C₂, which can also be obtained by reaction of the metal with acetylene. Potassium, rubidium, and caesium react with graphite; their atoms are intercalated between the hexagonal graphite layers, forming graphite intercalation compounds of formulae MC₆₀ (dark grey, almost black), MC₄₈ (dark grey, almost black), MC₃₆ (blue), MC₂₄ (steel blue), and MC₈ (bronze) (M = K, Rb, or Cs). These compounds are over 200 times more electrically conductive than pure graphite, suggesting that the valence electron of the alkali metal is transferred to the graphite layers (e.g. M⁺C−8).[66] Upon heating of KC₈, the elimination of potassium atoms results in the conversion in sequence to KC₂₄, KC₃₆, KC₄₈ and finally KC₆₀. KC₈ is a very strong reducing agent and is pyrophoric and explodes on contact with water.[114][115] While the larger alkali metals (K, Rb, and Cs) initially form MC₈, the smaller ones initially form MC₆, and indeed they require reaction of the metals with graphite at high temperatures around 500 °C to form.[116] Apart from this, the alkali metals are such strong reducing agents that they can even reduce buckminsterfullerene to produce solid fullerides M_nC₆₀; sodium, potassium, rubidium, and caesium can form fullerides where n = 2, 3, 4, or 6, and rubidium and caesium additionally can achieve n = 1.[11]^: 285

When the alkali metals react with the heavier elements in the carbon group (silicon, germanium, tin, and lead), ionic substances with cage-like structures are formed, such as the silicides M₄Si₄ (M = K, Rb, or Cs), which contains M⁺ and tetrahedral Si4−4 ions.[66] The chemistry of alkali metal germanides, involving the germanide ion Ge⁴⁻ and other cluster (Zintl) ions such as Ge2−4, Ge4−9, Ge2−9, and [(Ge₉)₂]⁶⁻, is largely analogous to that of the corresponding silicides.[11]^: 393 Alkali metal stannides are mostly ionic, sometimes with the stannide ion (Sn⁴⁻),[110] and sometimes with more complex Zintl ions such as Sn4−9, which appears in tetrapotassium nonastannide (K₄Sn₉).[117] The monatomic plumbide ion (Pb⁴⁻) is unknown, and indeed its formation is predicted to be energetically unfavourable; alkali metal plumbides have complex Zintl ions, such as Pb4−9. These alkali metal germanides, stannides, and plumbides may be produced by reducing germanium, tin, and lead with sodium metal in liquid ammonia.[11]^: 394

Unit cell ball-and-stick model of lithium nitride.[118] On the basis of size a tetrahedral structure would be expected, but that would be geometrically impossible: thus lithium nitride takes on this unique crystal structure.[11]^: 76

Lithium, the lightest of the alkali metals, is the only alkali metal which reacts with nitrogen at standard conditions, and its nitride is the only stable alkali metal nitride. Nitrogen is an unreactive gas because breaking the strong triple bond in the dinitrogen molecule (N₂) requires a lot of energy. The formation of an alkali metal nitride would consume the ionisation energy of the alkali metal (forming M⁺ ions), the energy required to break the triple bond in N₂ and the formation of N³⁻ ions, and all the energy released from the formation of an alkali metal nitride is from the lattice energy of the alkali metal nitride. The lattice energy is maximised with small, highly charged ions; the alkali metals do not form highly charged ions, only forming ions with a charge of +1, so only lithium, the smallest alkali metal, can release enough lattice energy to make the reaction with nitrogen exothermic, forming lithium nitride. The reactions of the other alkali metals with nitrogen would not release enough lattice energy and would thus be endothermic, so they do not form nitrides at standard conditions.[85] Sodium nitride (Na₃N) and potassium nitride (K₃N), while existing, are extremely unstable, being prone to decomposing back into their constituent elements, and cannot be produced by reacting the elements with each other at standard conditions.[119][120] Steric hindrance forbids the existence of rubidium or caesium nitride.[11]^: 417 However, sodium and potassium form colourless azide salts involving the linear N−3 anion; due to the large size of the alkali metal cations, they are thermally stable enough to be able to melt before decomposing.[11]^: 417

All the alkali metals react readily with phosphorus and arsenic to form phosphides and arsenides with the formula M₃Pn (where M represents an alkali metal and Pn represents a pnictogen – phosphorus, arsenic, antimony, or bismuth). This is due to the greater size of the P³⁻ and As³⁻ ions, so that less lattice energy needs to be released for the salts to form.[66] These are not the only phosphides and arsenides of the alkali metals: for example, potassium has nine different known phosphides, with formulae K₃P, K₄P₃, K₅P₄, KP, K₄P₆, K₃P₇, K₃P₁₁, KP_10.3, and KP₁₅.[121] While most metals form arsenides, only the alkali and alkaline earth metals form mostly ionic arsenides. The structure of Na₃As is complex with unusually short Na–Na distances of 328–330 pm which are shorter than in sodium metal, and this indicates that even with these electropositive metals the bonding cannot be straightforwardly ionic.[11] Other alkali metal arsenides not conforming to the formula M₃As are known, such as LiAs, which has a metallic lustre and electrical conductivity indicating the presence of some metallic bonding.[11] The antimonides are unstable and reactive as the Sb³⁻ ion is a strong reducing agent; reaction of them with acids form the toxic and unstable gas stibine (SbH₃).[122] Indeed, they have some metallic properties, and the alkali metal antimonides of stoichiometry MSb involve antimony atoms bonded in a spiral Zintl structure.[123] Bismuthides are not even wholly ionic; they are intermetallic compounds containing partially metallic and partially ionic bonds.[124]

Rb₉O₂ cluster, composed of two regular octahedra connected to each other by one face

Cs₁₁O₃ cluster, composed of three regular octahedra where each octahedron is connected to both of the others by one face each. All three octahedra have one edge in common.

All the alkali metals react vigorously with oxygen at standard conditions. They form various types of oxides, such as simple oxides (containing the O²⁻ ion), peroxides (containing the O2−2 ion, where there is a single bond between the two oxygen atoms), superoxides (containing the O−2 ion), and many others. Lithium burns in air to form lithium oxide, but sodium reacts with oxygen to form a mixture of sodium oxide and sodium peroxide. Potassium forms a mixture of potassium peroxide and potassium superoxide, while rubidium and caesium form the superoxide exclusively. Their reactivity increases going down the group: while lithium, sodium and potassium merely burn in air, rubidium and caesium are pyrophoric (spontaneously catch fire in air).[85]

The smaller alkali metals tend to polarise the larger anions (the peroxide and superoxide) due to their small size. This attracts the electrons in the more complex anions towards one of its constituent oxygen atoms, forming an oxide ion and an oxygen atom. This causes lithium to form the oxide exclusively on reaction with oxygen at room temperature. This effect becomes drastically weaker for the larger sodium and potassium, allowing them to form the less stable peroxides. Rubidium and caesium, at the bottom of the group, are so large that even the least stable superoxides can form. Because the superoxide releases the most energy when formed, the superoxide is preferentially formed for the larger alkali metals where the more complex anions are not polarised. (The oxides and peroxides for these alkali metals do exist, but do not form upon direct reaction of the metal with oxygen at standard conditions.)[85] In addition, the small size of the Li⁺ and O²⁻ ions contributes to their forming a stable ionic lattice structure. Under controlled conditions, however, all the alkali metals, with the exception of francium, are known to form their oxides, peroxides, and superoxides. The alkali metal peroxides and superoxides are powerful oxidising agents. Sodium peroxide and potassium superoxide react with carbon dioxide to form the alkali metal carbonate and oxygen gas, which allows them to be used in submarine air purifiers; the presence of water vapour, naturally present in breath, makes the removal of carbon dioxide by potassium superoxide even more efficient.[66][125] All the stable alkali metals except lithium can form red ozonides (MO₃) through low-temperature reaction of the powdered anhydrous hydroxide with ozone: the ozonides may be then extracted using liquid ammonia. They slowly decompose at standard conditions to the superoxides and oxygen, and hydrolyse immediately to the hydroxides when in contact with water.[11]^: 85 Potassium, rubidium, and caesium also form sesquioxides M₂O₃, which may be better considered peroxide disuperoxides, [(M⁺)₄(O2−2)(O−2)₂].[11]^: 85

Rubidium and caesium can form a great variety of suboxides with the metals in formal oxidation states below +1.[11]^: 85 Rubidium can form Rb₆O and Rb₉O₂ (copper-coloured) upon oxidation in air, while caesium forms an immense variety of oxides, such as the ozonide CsO₃[126][127] and several brightly coloured suboxides,[128] such as Cs₇O (bronze), Cs₄O (red-violet), Cs₁₁O₃ (violet), Cs₃O (dark green),[129] CsO, Cs₃O₂,[130] as well as Cs₇O₂.[131][132] The last of these may be heated under vacuum to generate Cs₂O.[57]

The alkali metals can also react analogously with the heavier chalcogens (sulfur, selenium, tellurium, and polonium), and all the alkali metal chalcogenides are known (with the exception of francium's). Reaction with an excess of the chalcogen can similarly result in lower chalcogenides, with chalcogen ions containing chains of the chalcogen atoms in question. For example, sodium can react with sulfur to form the sulfide (Na₂S) and various polysulfides with the formula Na₂S_x (x from 2 to 6), containing the S²⁻
_x ions.[66] Due to the basicity of the Se²⁻ and Te²⁻ ions, the alkali metal selenides and tellurides are alkaline in solution; when reacted directly with selenium and tellurium, alkali metal polyselenides and polytellurides are formed along with the selenides and tellurides with the Se²⁻
_x and Te²⁻
_x ions.[133] They may be obtained directly from the elements in liquid ammonia or when air is not present, and are colourless, water-soluble compounds that air oxidises quickly back to selenium or tellurium.[11]^: 766 The alkali metal polonides are all ionic compounds containing the Po²⁻ ion; they are very chemically stable and can be produced by direct reaction of the elements at around 300–400 °C.[11]^: 766[134][135]

The alkali metals are among the most electropositive elements on the periodic table and thus tend to bond ionically to the most electronegative elements on the periodic table, the halogens (fluorine, chlorine, bromine, iodine, and astatine), forming salts known as the alkali metal halides. The reaction is very vigorous and can sometimes result in explosions.[11]^: 76 All twenty stable alkali metal halides are known; the unstable ones are not known, with the exception of sodium astatide, because of the great instability and rarity of astatine and francium. The most well-known of the twenty is certainly sodium chloride, otherwise known as common salt. All of the stable alkali metal halides have the formula MX where M is an alkali metal and X is a halogen. They are all white ionic crystalline solids that have high melting points.[5][85] All the alkali metal halides are soluble in water except for lithium fluoride (LiF), which is insoluble in water due to its very high lattice enthalpy. The high lattice enthalpy of lithium fluoride is due to the small sizes of the Li⁺ and F⁻ ions, causing the electrostatic interactions between them to be strong:[5] a similar effect occurs for magnesium fluoride, consistent with the diagonal relationship between lithium and magnesium.[11]^: 76

The alkali metals also react similarly with hydrogen to form ionic alkali metal hydrides, where the hydride anion acts as a pseudohalide: these are often used as reducing agents, producing hydrides, complex metal hydrides, or hydrogen gas.[11]^: 83[66] Other pseudohalides are also known, notably the cyanides. These are isostructural to the respective halides except for lithium cyanide, indicating that the cyanide ions may rotate freely.[11]^: 322 Ternary alkali metal halide oxides, such as Na₃ClO, K₃BrO (yellow), Na₄Br₂O, Na₄I₂O, and K₄Br₂O, are also known.[11]^: 83 The polyhalides are rather unstable, although those of rubidium and caesium are greatly stabilised by the feeble polarising power of these extremely large cations.[11]^: 835

18-crown-6 coordinating a potassium ion

Structure of 2.2.2-Cryptand encapsulating a potassium cation (purple). At crystalline state, obtained with an X-ray diffraction.[136]

Alkali metal cations do not usually form coordination complexes with simple Lewis bases due to their low charge of just +1 and their relatively large size; thus the Li⁺ ion forms most complexes and the heavier alkali metal ions form less and less (though exceptions occur for weak complexes).[11]^: 90 Lithium in particular has a very rich coordination chemistry in which it exhibits coordination numbers from 1 to 12, although octahedral hexacoordination is its preferred mode.[11]^: 90–1 In aqueous solution, the alkali metal ions exist as octahedral hexahydrate complexes ([M(H₂O)₆)]⁺), with the exception of the lithium ion, which due to its small size forms tetrahedral tetrahydrate complexes ([Li(H₂O)₄)]⁺); the alkali metals form these complexes because their ions are attracted by electrostatic forces of attraction to the polar water molecules. Because of this, anhydrous salts containing alkali metal cations are often used as desiccants.[66] Alkali metals also readily form complexes with crown ethers (e.g. 12-crown-4 for Li⁺, 15-crown-5 for Na⁺, 18-crown-6 for K⁺, and 21-crown-7 for Rb⁺) and cryptands due to electrostatic attraction.[66]

The alkali metals dissolve slowly in liquid ammonia, forming ammoniacal solutions of solvated metal cation M⁺ and solvated electron e⁻, which react to form hydrogen gas and the alkali metal amide (MNH₂, where M represents an alkali metal): this was first noted by Humphry Davy in 1809 and rediscovered by W. Weyl in 1864. The process may be speeded up by a catalyst. Similar solutions are formed by the heavy divalent alkaline earth metals calcium, strontium, barium, as well as the divalent lanthanides, europium and ytterbium. The amide salt is quite insoluble and readily precipitates out of solution, leaving intensely coloured ammonia solutions of the alkali metals. In 1907, Charles A. Kraus identified the colour as being due to the presence of solvated electrons, which contribute to the high electrical conductivity of these solutions. At low concentrations (below 3 M), the solution is dark blue and has ten times the conductivity of aqueous sodium chloride; at higher concentrations (above 3 M), the solution is copper-coloured and has approximately the conductivity of liquid metals like mercury.[11][66][137] In addition to the alkali metal amide salt and solvated electrons, such ammonia solutions also contain the alkali metal cation (M⁺), the neutral alkali metal atom (M), diatomic alkali metal molecules (M₂) and alkali metal anions (M⁻). These are unstable and eventually become the more thermodynamically stable alkali metal amide and hydrogen gas. Solvated electrons are powerful reducing agents and are often used in chemical synthesis.[66]

Structure of the octahedral n-butyllithium hexamer, (C₄H₉Li)₆.[138] The aggregates are held together by delocalised covalent bonds between lithium and the terminal carbon of the butyl chain.[139] There is no direct lithium–lithium bonding in any organolithium compound.[123]^: 264

Solid phenyllithium forms monoclinic crystals can be described as consisting of dimeric Li₂(C₆H₅)₂ subunits. The lithium atoms and the ipso carbons of the phenyl rings form a planar four-membered ring. The plane of the phenyl groups are perpendicular to the plane of this Li₂C₂ ring. Additional strong intermolecular bonding occurs between these phenyllithium dimers and the π electrons of the phenyl groups in the adjacent dimers, resulting in an infinite polymeric ladder structure.[140]

Being the smallest alkali metal, lithium forms the widest variety of and most stable organometallic compounds, which are bonded covalently. Organolithium compounds are electrically non-conducting volatile solids or liquids that melt at low temperatures, and tend to form oligomers with the structure (RLi)_x where R is the organic group. As the electropositive nature of lithium puts most of the charge density of the bond on the carbon atom, effectively creating a carbanion, organolithium compounds are extremely powerful bases and nucleophiles. For use as bases, butyllithiums are often used and are commercially available. An example of an organolithium compound is methyllithium ((CH₃Li)_x), which exists in tetrameric (x = 4, tetrahedral) and hexameric (x = 6, octahedral) forms.[66][141] Organolithium compounds, especially n-butyllithium, are useful reagents in organic synthesis, as might be expected given lithium's diagonal relationship with magnesium, which plays an important role in the Grignard reaction.[11]^: 102 For example, alkyllithiums and aryllithiums may be used to synthesise aldehydes and ketones by reaction with metal carbonyls. The reaction with nickel tetracarbonyl, for example, proceeds through an unstable acyl nickel carbonyl complex which then undergoes electrophilic substitution to give the desired aldehyde (using H⁺ as the electrophile) or ketone (using an alkyl halide) product.[11]^: 105

${\displaystyle {\ce {LiR\ +\ [Ni(CO)4]\ \longrightarrow Li^{+}[RCONi(CO)3]^{-}}}}$

${\displaystyle {\ce {Li^{+}[RCONi(CO)3]^{-}->[{\ce {H^{+}}}][{\ce {solvent}}]\ Li^{+}\ +\ RCHO\ +\ [(solvent)Ni(CO)3]}}}$

${\displaystyle {\ce {Li^{+}[RCONi(CO)3]^{-}->[{\ce {R^{'}Br}}][{\ce {solvent}}]\ Li^{+}\ +\ RR^{'}CO\ +\ [(solvent)Ni(CO)3]}}}$

Alkyllithiums and aryllithiums may also react with N,N-disubstituted amides to give aldehydes and ketones, and symmetrical ketones by reacting with carbon monoxide. They thermally decompose to eliminate a β-hydrogen, producing alkenes and lithium hydride: another route is the reaction of ethers with alkyl- and aryllithiums that act as strong bases.[11]^: 105 In non-polar solvents, aryllithiums react as the carbanions they effectively are, turning carbon dioxide to aromatic carboxylic acids (ArCO₂H) and aryl ketones to tertiary carbinols (Ar'₂C(Ar)OH). Finally, they may be used to synthesise other organometallic compounds through metal-halogen exchange.[11]^: 106

Unlike the organolithium compounds, the organometallic compounds of the heavier alkali metals are predominantly ionic. The application of organosodium compounds in chemistry is limited in part due to competition from organolithium compounds, which are commercially available and exhibit more convenient reactivity. The principal organosodium compound of commercial importance is sodium cyclopentadienide. Sodium tetraphenylborate can also be classified as an organosodium compound since in the solid state sodium is bound to the aryl groups. Organometallic compounds of the higher alkali metals are even more reactive than organosodium compounds and of limited utility. A notable reagent is Schlosser's base, a mixture of n-butyllithium and potassium tert-butoxide. This reagent reacts with propene to form the compound allylpotassium (KCH₂CHCH₂). cis-2-Butene and trans-2-butene equilibrate when in contact with alkali metals. Whereas isomerisation is fast with lithium and sodium, it is slow with the heavier alkali metals. The heavier alkali metals also favour the sterically congested conformation.[142] Several crystal structures of organopotassium compounds have been reported, establishing that they, like the sodium compounds, are polymeric.[143] Organosodium, organopotassium, organorubidium and organocaesium compounds are all mostly ionic and are insoluble (or nearly so) in nonpolar solvents.[66]

Alkyl and aryl derivatives of sodium and potassium tend to react with air. They cause the cleavage of ethers, generating alkoxides. Unlike alkyllithium compounds, alkylsodiums and alkylpotassiums cannot be made by reacting the metals with alkyl halides because Wurtz coupling occurs:[123]^: 265

RM + R'X → R–R' + MX

As such, they have to be made by reacting alkylmercury compounds with sodium or potassium metal in inert hydrocarbon solvents. While methylsodium forms tetramers like methyllithium, methylpotassium is more ionic and has the nickel arsenide structure with discrete methyl anions and potassium cations.[123]^: 265

The alkali metals and their hydrides react with acidic hydrocarbons, for example cyclopentadienes and terminal alkynes, to give salts. Liquid ammonia, ether, or hydrocarbon solvents are used, the most common of which being tetrahydrofuran. The most important of these compounds is sodium cyclopentadienide, NaC₅H₅, an important precursor to many transition metal cyclopentadienyl derivatives.[123]^: 265 Similarly, the alkali metals react with cyclooctatetraene in tetrahydrofuran to give alkali metal cyclooctatetraenides; for example, dipotassium cyclooctatetraenide (K₂C₈H₈) is an important precursor to many metal cyclooctatetraenyl derivatives, such as uranocene.[123]^: 266 The large and very weakly polarising alkali metal cations can stabilise large, aromatic, polarisable radical anions, such as the dark-green sodium naphthalenide, Na⁺[C₁₀H₈•]⁻, a strong reducing agent.[123]^: 266

Upon reacting with oxygen, alkali metals form oxides, peroxides, superoxides and suboxides. However, the first three are more common. The table below[144] shows the types of compounds formed in reaction with oxygen. The compound in brackets represents the minor product of combustion.

The alkali metal peroxides are ionic compounds that are unstable in water. The peroxide anion is weakly bound to the cation, and it is hydrolysed, forming stronger covalent bonds.

Na₂O₂ + 2H₂O → 2NaOH + H₂O₂

The other oxygen compounds are also unstable in water.

2KO₂ + 2H₂O → 2KOH + H₂O₂ + O₂[145]

Li₂O + H₂O → 2LiOH

With sulfur, they form sulfides and polysulfides.[146]

2Na + 1/8S₈ → Na₂S + 1/8S₈ → Na₂S₂...Na₂S₇

Because alkali metal sulfides are essentially salts of a weak acid and a strong base, they form basic solutions.

S^2- + H₂O → HS⁻ + HO⁻

HS⁻ + H₂O → H₂S + HO⁻

Lithium is the only metal that combines directly with nitrogen at room temperature.

3Li + 1/2N₂ → Li₃N

Li₃N can react with water to liberate ammonia.

Li₃N + 3H₂O → 3LiOH + NH₃

With hydrogen, alkali metals form saline hydrides that hydrolyse in water.

${\displaystyle {\ce {2 Na \ + H2 \ ->[{\ce {\Delta}}] \ 2 NaH}}}$

${\displaystyle {\ce {2NaH\ +\ 2H2O\ \longrightarrow \ 2NaOH\ +\ H2\uparrow }}}$

Lithium is the only metal that reacts directly with carbon to give dilithium acetylide. Na and K can react with acetylene to give acetylides.[147]

${\displaystyle {\ce {2Li\ +\ 2C\ \longrightarrow \ Li2C2}}}$

${\displaystyle {\ce {2Na\ +\ 2C2H2\ ->[{\ce {150\ ^{o}C}}]\ 2NaC2H\ +\ H2}}}$

${\displaystyle {\ce {2Na\ +\ 2NaCCH\ ->[{\ce {220\ ^{o}C}}]\ 2Na2C2\ +\ H2}}}$

On reaction with water, they generate hydroxide ions and hydrogen gas. This reaction is vigorous and highly exothermic and the hydrogen resulted may ignite in air or even explode in the case of Rb and Cs.[144]

Na + H₂O → NaOH + 1/2H₂

The alkali metals are very good reducing agents. They can reduce metal cations that are less electropositive. Titanium is produced industrially by the reduction of titanium tetrachloride with Na at 400⁰C (van Arkel–de Boer process).

TiCl₄ + 4Na → 4NaCl + Ti

Alkali metals react with halogen derivatives to generate hydrocarbon via the Wurtz reaction.

2CH₃-Cl + 2Na → H₃C-CH₃ + 2NaCl

Alkali metals dissolve in liquid ammonia or other donor solvents like aliphatic amines or hexamethylphosphoramide to give blue solutions. These solutions are believed to contain free electrons.[144]

Na + xNH₃ → Na⁺ + e(NH₃)_x⁻

Due to the presence of solvated electrons, these solutions are very powerful reducing agents used in organic synthesis.

Reduction reactions using sodium in liquid ammonia

Reaction 1) is known as Birch reduction. Other reductions[144] that can be carried by these solutions are:

S₈ + 2e⁻ → S₈^2-

Fe(CO)₅ + 2e⁻ → Fe(CO)₄^2- + CO

The element hydrogen, with one electron per neutral atom, is usually placed at the top of Group 1 of the periodic table because of its electron configuration. But hydrogen is not normally considered to be an alkali metal.[158] Metallic hydrogen, which only exists at very high pressures, is known for its electrical and magnetic properties, not its chemical properties.[159] Under typical conditions, pure hydrogen exists as a diatomic gas consisting of two atoms per molecule (H₂);[160] however, the alkali metals form diatomic molecules (such as dilithium, Li₂) only at high temperatures, when they are in the gaseous state.[161]

Hydrogen, like the alkali metals, has one valence electron[123] and reacts easily with the halogens,[123] but the similarities mostly end there because of the small size of a bare proton H⁺ compared to the alkali metal cations.[123] Its placement above lithium is primarily due to its electron configuration.[158] It is sometimes placed above fluorine due to their similar chemical properties, though the resemblance is likewise not absolute.[162]

The first ionisation energy of hydrogen (1312.0 kJ/mol) is much higher than that of the alkali metals.[163][164] As only one additional electron is required to fill in the outermost shell of the hydrogen atom, hydrogen often behaves like a halogen, forming the negative hydride ion, and is very occasionally considered to be a halogen on that basis. (The alkali metals can also form negative ions, known as alkalides, but these are little more than laboratory curiosities, being unstable.)[80][81] An argument against this placement is that formation of hydride from hydrogen is endothermic, unlike the exothermic formation of halides from halogens. The radius of the H⁻ anion also does not fit the trend of increasing size going down the halogens: indeed, H⁻ is very diffuse because its single proton cannot easily control both electrons.[123]^: 15–6 It was expected for some time that liquid hydrogen would show metallic properties;[162] while this has been shown to not be the case, under extremely high pressures, such as those found at the cores of Jupiter and Saturn, hydrogen does become metallic and behaves like an alkali metal; in this phase, it is known as metallic hydrogen.[165] The electrical resistivity of liquid metallic hydrogen at 3000 K is approximately equal to that of liquid rubidium and caesium at 2000 K at the respective pressures when they undergo a nonmetal-to-metal transition.[166]

The 1s¹ electron configuration of hydrogen, while analogous to that of the alkali metals (ns¹), is unique because there is no 1p subshell. Hence it can lose an electron to form the hydron H⁺, or gain one to form the hydride ion H⁻.[11]^: 43 In the former case it resembles superficially the alkali metals; in the latter case, the halogens, but the differences due to the lack of a 1p subshell are important enough that neither group fits the properties of hydrogen well.[11]^: 43 Group 14 is also a good fit in terms of thermodynamic properties such as ionisation energy and electron affinity, but hydrogen cannot be tetravalent. Thus none of the three placements are entirely satisfactory, although group 1 is the most common placement (if one is chosen) because of the electron configuration and the fact that the hydron is by far the most important of all monatomic hydrogen species, being the foundation of acid-base chemistry.[162] As an example of hydrogen's unorthodox properties stemming from its unusual electron configuration and small size, the hydrogen ion is very small (radius around 150 fm compared to the 50–220 pm size of most other atoms and ions) and so is nonexistent in condensed systems other than in association with other atoms or molecules. Indeed, transferring of protons between chemicals is the basis of acid-base chemistry.[11]^: 43 Also unique is hydrogen's ability to form hydrogen bonds, which are an effect of charge-transfer, electrostatic, and electron correlative contributing phenomena.[162] While analogous lithium bonds are also known, they are mostly electrostatic.[162] Nevertheless, hydrogen can take on the same structural role as the alkali metals in some molecular crystals, and has a close relationship with the lightest alkali metals (especially lithium).[167]

Similarly to the alkali metals, ammonia reacts with hydrochloric acid to form the salt ammonium chloride.

The ammonium ion (NH+4) has very similar properties to the heavier alkali metals, acting as an alkali metal intermediate between potassium and rubidium,[157][168] and is often considered a close relative.[169][170][171] For example, most alkali metal salts are soluble in water, a property which ammonium salts share.[172] Ammonium is expected to behave stably as a metal (NH+4 ions in a sea of delocalised electrons) at very high pressures (though less than the typical pressure where transitions from insulating to metallic behaviour occur around, 100 GPa), and could possibly occur inside the ice giants Uranus and Neptune, which may have significant impacts on their interior magnetic fields.[170][171] It has been estimated that the transition from a mixture of ammonia and dihydrogen molecules to metallic ammonium may occur at pressures just below 25 GPa.[170] Under standard conditions, ammonium can form a metallic amalgam with mercury.[173]

Other "pseudo-alkali metals" include the alkylammonium cations, in which some of the hydrogen atoms in the ammonium cation are replaced by alkyl or aryl groups. In particular, the quaternary ammonium cations (NR+4) are very useful since they are permanently charged, and they are often used as an alternative to the expensive Cs⁺ to stabilise very large and very easily polarisable anions such as HI−2.[11]^: 812–9 Tetraalkylammonium hydroxides, like alkali metal hydroxides, are very strong bases that react with atmospheric carbon dioxide to form carbonates.[123]^: 256 Furthermore, the nitrogen atom may be replaced by a phosphorus, arsenic, or antimony atom (the heavier nonmetallic pnictogens), creating a phosphonium (PH+4) or arsonium (AsH+4) cation that can itself be substituted similarly; while stibonium (SbH+4) itself is not known, some of its organic derivatives are characterised.[157]

Cobaltocene, Co(C₅H₅)₂, is a metallocene, the cobalt analogue of ferrocene. It is a dark purple solid. Cobaltocene has 19 valence electrons, one more than usually found in organotransition metal complexes, such as its very stable relative, ferrocene, in accordance with the 18-electron rule. This additional electron occupies an orbital that is antibonding with respect to the Co–C bonds. Consequently, many chemical reactions of Co(C₅H₅)₂ are characterized by its tendency to lose this "extra" electron, yielding a very stable 18-electron cation known as cobaltocenium. Many cobaltocenium salts coprecipitate with caesium salts, and cobaltocenium hydroxide is a strong base that absorbs atmospheric carbon dioxide to form cobaltocenium carbonate.[123]^: 256 Like the alkali metals, cobaltocene is a strong reducing agent, and decamethylcobaltocene is stronger still due to the combined inductive effect of the ten methyl groups.[174] Cobalt may be substituted by its heavier congener rhodium to give rhodocene, an even stronger reducing agent.[175] Iridocene (involving iridium) would presumably be still more potent, but is not very well-studied due to its instability.[176]

Very pure thallium pieces in a glass ampoule, stored under argon gas

Thallium is the heaviest stable element in group 13 of the periodic table. At the bottom of the periodic table, the inert-pair effect is quite strong, because of the relativistic stabilisation of the 6s orbital and the decreasing bond energy as the atoms increase in size so that the amount of energy released in forming two more bonds is not worth the high ionisation energies of the 6s electrons.[11]^: 226–7 It displays the +1 oxidation state[11]^: 28 that all the known alkali metals display,[11]^: 28 and thallium compounds with thallium in its +1 oxidation state closely resemble the corresponding potassium or silver compounds stoichiometrically due to the similar ionic radii of the Tl⁺ (164 pm), K⁺ (152 pm) and Ag⁺ (129 pm) ions.[177][178] It was sometimes considered an alkali metal in continental Europe (but not in England) in the years immediately following its discovery,[178]^: 126 and was placed just after caesium as the sixth alkali metal in Dmitri Mendeleev's 1869 periodic table and Julius Lothar Meyer's 1868 periodic table.[22] (Mendeleev's 1871 periodic table and Meyer's 1870 periodic table put thallium in its current position in the boron group and left the space below caesium blank.)[22] However, thallium also displays the oxidation state +3,[11]^: 28 which no known alkali metal displays[11]^: 28 (although ununennium, the undiscovered seventh alkali metal, is predicted to possibly display the +3 oxidation state).[37]^{: 1729–1730} The sixth alkali metal is now considered to be francium.[179] While Tl⁺ is stabilised by the inert-pair effect, this inert pair of 6s electrons is still able to participate chemically, so that these electrons are stereochemically active in aqueous solution. Additionally, the thallium halides (except TlF) are quite insoluble in water, and TlI has an unusual structure because of the presence of the stereochemically active inert pair in thallium.[180]

Copper

Silver

Gold

The group 11 metals (or coinage metals), copper, silver, and gold, are typically categorised as transition metals given they can form ions with incomplete d-shells. Physically, they have the relatively low melting points and high electronegativity values associated with post-transition metals. "The filled d subshell and free s electron of Cu, Ag, and Au contribute to their high electrical and thermal conductivity. Transition metals to the left of group 11 experience interactions between s electrons and the partially filled d subshell that lower electron mobility."[181] Chemically, the group 11 metals behave like main-group metals in their +1 valence states, and are hence somewhat related to the alkali metals: this is one reason for their previously being labelled as "group IB", paralleling the alkali metals' "group IA". They are occasionally classified as post-transition metals.[182] Their spectra are analogous to those of the alkali metals.[30] Their monopositive ions are paramagnetic and contribute no colour to their salts, like those of the alkali metals.[183]

In Mendeleev's 1871 periodic table, copper, silver, and gold are listed twice, once under group VIII (with the iron triad and platinum group metals), and once under group IB. Group IB was nonetheless parenthesised to note that it was tentative. Mendeleev's main criterion for group assignment was the maximum oxidation state of an element: on that basis, the group 11 elements could not be classified in group IB, due to the existence of copper(II) and gold(III) compounds being known at that time.[30] However, eliminating group IB would make group I the only main group (group VIII was labelled a transition group) to lack an A–B bifurcation.[30] Soon afterward, a majority of chemists chose to classify these elements in group IB and remove them from group VIII for the resulting symmetry: this was the predominant classification until the rise of the modern medium-long 18-column periodic table, which separated the alkali metals and group 11 metals.[30]

The coinage metals were traditionally regarded as a subdivision of the alkali metal group, due to them sharing the characteristic s¹ electron configuration of the alkali metals (group 1: p⁶s¹; group 11: d¹⁰s¹). However, the similarities are largely confined to the stoichiometries of the +1 compounds of both groups, and not their chemical properties.[11]^: 1177 This stems from the filled d subshell providing a much weaker shielding effect on the outermost s electron than the filled p subshell, so that the coinage metals have much higher first ionisation energies and smaller ionic radii than do the corresponding alkali metals.[11]^: 1177 Furthermore, they have higher melting points, hardnesses, and densities, and lower reactivities and solubilities in liquid ammonia, as well as having more covalent character in their compounds.[11]^: 1177 Finally, the alkali metals are at the top of the electrochemical series, whereas the coinage metals are almost at the very bottom.[11]^: 1177 The coinage metals' filled d shell is much more easily disrupted than the alkali metals' filled p shell, so that the second and third ionisation energies are lower, enabling higher oxidation states than +1 and a richer coordination chemistry, thus giving the group 11 metals clear transition metal character.[11]^: 1177 Particularly noteworthy is gold forming ionic compounds with rubidium and caesium, in which it forms the auride ion (Au⁻) which also occurs in solvated form in liquid ammonia solution: here gold behaves as a pseudohalogen because its 5d¹⁰6s¹ configuration has one electron less than the quasi-closed shell 5d¹⁰6s² configuration of mercury.[11]^: 1177

Pure alkali metals are dangerously reactive with air and water and must be kept away from heat, fire, oxidising agents, acids, most organic compounds, halocarbons, plastics, and moisture. They also react with carbon dioxide and carbon tetrachloride, so that normal fire extinguishers are counterproductive when used on alkali metal fires.[216] Some Class D dry powder extinguishers designed for metal fires are effective, depriving the fire of oxygen and cooling the alkali metal.[217]

Experiments are usually conducted using only small quantities of a few grams in a fume hood. Small quantities of lithium may be disposed of by reaction with cool water, but the heavier alkali metals should be dissolved in the less reactive isopropanol.[216][218] The alkali metals must be stored under mineral oil or an inert atmosphere. The inert atmosphere used may be argon or nitrogen gas, except for lithium, which reacts with nitrogen.[216] Rubidium and caesium must be kept away from air, even under oil, because even a small amount of air diffused into the oil may trigger formation of the dangerously explosive peroxide; for the same reason, potassium should not be stored under oil in an oxygen-containing atmosphere for longer than 6 months.[219][220]

Lithium carbonate

The bioinorganic chemistry of the alkali metal ions has been extensively reviewed.[221] Solid state crystal structures have been determined for many complexes of alkali metal ions in small peptides, nucleic acid constituents, carbohydrates and ionophore complexes.[222]

Lithium naturally only occurs in traces in biological systems and has no known biological role, but does have effects on the body when ingested.[223] Lithium carbonate is used as a mood stabiliser in psychiatry to treat bipolar disorder (manic-depression) in daily doses of about 0.5 to 2 grams, although there are side-effects.[223] Excessive ingestion of lithium causes drowsiness, slurred speech and vomiting, among other symptoms,[223] and poisons the central nervous system,[223] which is dangerous as the required dosage of lithium to treat bipolar disorder is only slightly lower than the toxic dosage.[223][224] Its biochemistry, the way it is handled by the human body and studies using rats and goats suggest that it is an essential trace element, although the natural biological function of lithium in humans has yet to be identified.[225][226]

Sodium and potassium occur in all known biological systems, generally functioning as electrolytes inside and outside cells.[227][228] Sodium is an essential nutrient that regulates blood volume, blood pressure, osmotic equilibrium and pH; the minimum physiological requirement for sodium is 500 milligrams per day.[229] Sodium chloride (also known as common salt) is the principal source of sodium in the diet, and is used as seasoning and preservative, such as for pickling and jerky; most of it comes from processed foods.[230] The Dietary Reference Intake for sodium is 1.5 grams per day,[231] but most people in the United States consume more than 2.3 grams per day,[232] the minimum amount that promotes hypertension;[233] this in turn causes 7.6 million premature deaths worldwide.[234]

Potassium is the major cation (positive ion) inside animal cells,[227] while sodium is the major cation outside animal cells.[227][228] The concentration differences of these charged particles causes a difference in electric potential between the inside and outside of cells, known as the membrane potential. The balance between potassium and sodium is maintained by ion transporter proteins in the cell membrane.[235] The cell membrane potential created by potassium and sodium ions allows the cell to generate an action potential—a "spike" of electrical discharge. The ability of cells to produce electrical discharge is critical for body functions such as neurotransmission, muscle contraction, and heart function.[235] Disruption of this balance may thus be fatal: for example, ingestion of large amounts of potassium compounds can lead to hyperkalemia strongly influencing the cardiovascular system.[236][237] Potassium chloride is used in the United States for lethal injection executions.[236]

A wheel type radiotherapy device which has a long collimator to focus the radiation into a narrow beam. The caesium-137 chloride radioactive source is the blue square, and gamma rays are represented by the beam emerging from the aperture. This was the radiation source involved in the Goiânia accident, containing about 93 grams of caesium-137 chloride.

Due to their similar atomic radii, rubidium and caesium in the body mimic potassium and are taken up similarly. Rubidium has no known biological role, but may help stimulate metabolism,[238][239][240] and, similarly to caesium,[238][241] replace potassium in the body causing potassium deficiency.[238][240] Partial substitution is quite possible and rather non-toxic: a 70 kg person contains on average 0.36 g of rubidium, and an increase in this value by 50 to 100 times did not show negative effects in test persons.[242] Rats can survive up to 50% substitution of potassium by rubidium.[240][243] Rubidium (and to a much lesser extent caesium) can function as temporary cures for hypokalemia; while rubidium can adequately physiologically substitute potassium in some systems, caesium is never able to do so.[239] There is only very limited evidence in the form of deficiency symptoms for rubidium being possibly essential in goats; even if this is true, the trace amounts usually present in food are more than enough.[244][245]

Caesium compounds are rarely encountered by most people, but most caesium compounds are mildly toxic. Like rubidium, caesium tends to substitute potassium in the body, but is significantly larger and is therefore a poorer substitute.[241] Excess caesium can lead to hypokalemia, arrythmia, and acute cardiac arrest,[246] but such amounts would not ordinarily be encountered in natural sources.[247] As such, caesium is not a major chemical environmental pollutant.[247] The median lethal dose (LD₅₀) value for caesium chloride in mice is 2.3 g per kilogram, which is comparable to the LD₅₀ values of potassium chloride and sodium chloride.[248] Caesium chloride has been promoted as an alternative cancer therapy,[249] but has been linked to the deaths of over 50 patients, on whom it was used as part of a scientifically unvalidated cancer treatment.[250]

Radioisotopes of caesium require special precautions: the improper handling of caesium-137 gamma ray sources can lead to release of this radioisotope and radiation injuries. Perhaps the best-known case is the Goiânia accident of 1987, in which an improperly-disposed-of radiation therapy system from an abandoned clinic in the city of Goiânia, Brazil, was scavenged from a junkyard, and the glowing caesium salt sold to curious, uneducated buyers. This led to four deaths and serious injuries from radiation exposure. Together with caesium-134, iodine-131, and strontium-90, caesium-137 was among the isotopes distributed by the Chernobyl disaster which constitute the greatest risk to health.[98] Radioisotopes of francium would presumably be dangerous as well due to their high decay energy and short half-life, but none have been produced in large enough amounts to pose any serious risk.[199]