BNSF Railway

GE Dash 9-44CW 4464 leads a container train through Winslow, Arizona, in the rain on the BNSF Southern Transcon in Northern Arizona.

On June 30, 1994, BN and ATSF announced plans to merge.[16] They were the largest and smallest (by track mileage) of the "Super Seven", the seven largest of the then-twelve U.S. Class I railroads. The long-rumored announcement was delayed by a disagreement over the disposition of Santa Fe Pacific Gold Corporation, a gold mining subsidiary that ATSF agreed to sell to stockholders.[17] This announcement began the next wave of mergers, as the "Super Seven" were merged down to four in the next five years. The Illinois Central Railroad and Kansas City Southern Railway (KCS), two of the five "small" Class Is, announced on July 19 that the former would buy the latter,[18] but this plan was called off on October 25. The Union Pacific Railroad (UP), another major Western system, started a bidding war with BN for control of the SF on October 5.[19] The UP gave up on January 31, 1995, paving the way for the BN-ATSF merger.[20] Subsequently, the UP acquired the Southern Pacific Transportation Company (SP) in 1996, and Eastern U.S. systems CSX Transportation and Norfolk Southern Railway split Conrail in 1999.

Ex. Burlington Northern BNSF SD40-2, sitting in Galveston, Texas, alongside many other locomotives.

On February 7, 1995, BN and ATSF heads Gerald Grinstein and Robert D. Krebs both announced that shareholders had approved the plan, which would save overhead costs and combine BN's coal and ATSF's intermodal strengths. Although the two systems complemented each other with little overlap,[21] in contrast to the Santa Fe-Southern Pacific merger, which failed because it would have eliminated competition in many areas of the Southwest, BN and ATSF came to agreements with most other Class I's to keep them from opposing the merger. UP was satisfied with a single segment of trackage rights from Abilene, Kansas, to Superior, Nebraska, which BN and ATSF had both served. KCS gained haulage rights to several Midwest locations, including Omaha, East St. Louis, and Memphis, in exchange for BNSF getting similar access to New Orleans. SP, initially requesting far-reaching trackage rights throughout the West,[22] soon agreed on a reduced plan, whereby SP acquired trackage rights on ATSF for intermodal and automotive traffic to Chicago, and other trackage rights on ATSF in Kansas, south to Texas, and between Colorado and Texas. In exchange, SP assigned BNSF trackage rights over the former Chicago, Rock Island and Pacific Railroad between El Paso and Topeka and haulage rights to the Mexican border at Eagle Pass, Texas.[23] Regional Toledo, Peoria and Western Railway also obtained trackage rights over BN from Peoria to Galesburg, Illinois, a BN hub where it could interchange with SP[24] (which had rights on BN dating from 1990[25]). The Interstate Commerce Commission (ICC) approved the BNSF merger on July 20, 1995 (with final approval on August 23), less than a month before UP announced on August 3 that it would acquire SP.[26] Parents Burlington Northern Inc. and Santa Fe Pacific Corporation were acquired on September 22, 1995, by the new Burlington Northern Santa Fe Corporation. The merger of the operating companies was held up by issues with unions;[27] ATSF merged on December 31, 1996, into BN, which was renamed the Burlington Northern and Santa Fe Railway Company.[28]

Union Pacific's merger with Southern Pacific further enlarged the combined BNSF network. Unlike BN and ATSF, UP and SP had significant overlap, where the end of competition between the two risked creating a monopoly for freight carriage in much of the West. UP and BNSF announced in late September 1995 that, in exchange for BNSF not opposing the merger, it would obtain ownership of 335 miles (539 km) of line and about 3,500 miles (5,600 km) of trackage rights to reach these "two-to-one" shippers. Significant additions included rights over SP's Central Corridor from Denver via the Moffat Tunnel and Salt Lake City, and over Donner Pass, to the San Francisco Bay Area, with an alternate route through the Feather River Canyon along UP. The ATSF trackage in California's Central Valley was linked to BN's line into Oregon, through trackage rights over UP between Stockton and Keddie and acquisition of UP's section of the "Inside Gateway" to the beginning of BN trackage at Bieber. In Texas, BNSF received rights in several directions from the Houston area: west over UP to San Antonio, with a branch to Waco, and continuing over SP to Eagle Pass (replacing the haulage rights they had just obtained); south over UP to Brownsville; east over SP to New Orleans (including the purchase of this line east of Lake Charles); and northeast over SP to Memphis with a branch on UP to Little Rock. Ownership of a short connection between Waxahachie and Dallas also went from UP to BNSF. UP, in return, got a few short sections of trackage rights over BNSF, mainly connecting the SP at Chemult to the UP at Bend, Oregon, and connecting the SP at Mojave, California with existing UP rights on ATSF at Barstow, California.[29][30] On April 18, 1996, UP, BNSF, and the Chemical Manufacturers Association entered into an agreement giving BNSF rights over the UP line between Houston and East St. Louis, paralleling the Houston-Memphis SP line, and allowing BNSF to participate in the UP's plan for directional running, in which each line would serve through trains in only one direction.[31][32] The Surface Transportation Board, successor to the ICC, approved the UP-SP merger on July 3,[33] and UP control of SP took effect on September 11, 1996.[34] BNSF trackage rights operations began on the Central Corridor on October 10, and soon thereafter on other lines.[35]

BNSF continued projects started by its predecessors, most notably BN's work on reopening Stampede Pass. BN had closed Stampede Pass, the Northern Pacific Railway's main line across Washington, in 1984, in favor of the ex-Great Northern Railway's Stevens Pass. BN never abandoned the line and began rehabilitating it in early 1996, and the route reopened in early December, relieving the crowded Stevens Pass.[36] The ex-ATSF main line, now known as the Southern Transcon, has also seen steady work to add tracks, giving BNSF more capacity on this major intermodal route.[37]

On December 20, 1999, BNSF and the recently privatized Canadian National Railway announced plans (STB Finance Docket No. 33842 Archived 2016-03-03 at the Wayback Machine) to combine as subsidiaries of a new holding company, North American Railways, which would control about 50,000 miles (80,000 km) of railroad. With CN's lines located primarily in Canada and, through subsidiary Illinois Central Railroad, on a north–south corridor near BNSF's eastern edge, the two systems had little overlap. The combination would have benefited both companies by expanding available cash for capacity improvements, and allowing for longer single-system movements. Shippers and the Surface Transportation Board expressed concern and surprise about the timing, since the merger that produced BNSF had been the only one in the 1990s that did not cause severe deterioration in service.[38] The STB imposed on March 17, 2000, a 15-month moratorium (STB Ex Parte No. 582 Archived 2016-03-03 at the Wayback Machine) on mergers involving any two Class I railroads, citing widespread opposition not only to the merger but its effects, likely starting the final round of mergers into two big systems. BNSF and CN immediately turned to the U.S. Court of Appeals,[39] which on July 14 ruled that the STB's right to regulate mergers allowed a moratorium, and the two railroads called off the merger.[40] The STB released its final rules (STB Ex Parte No. 582 (Sub-No. 1) Archived 2016-03-03 at the Wayback Machine) on June 11, 2001, requiring any new application to merge two Class I railroads, with the exception of smaller Kansas City Southern Railway, to demonstrate that competition would be preserved and address effects of defensive moves by other carriers.[41] No further Class I mergers would take until the merger between Kansas City Southern and Canadian Pacific in April 2023, creating the Canadian Pacific Kansas City Railway.[42][43][44]

The Burlington Northern Santa Fe Corporation was incorporated in 1993 to facilitate the merger of Burlington Northern, Incorporated, parent of the Burlington Northern Railroad, and Santa Fe Pacific Corporation, which owned the Atchison, Topeka and Santa Fe Railway (Santa Fe).[45] The corporate merger was consummated on September 22, 1995, at which point shareholders of the previous companies became shareholders of BNSF and the two companies became wholly owned subsidiaries of BNSF.[45] In December 1996, the two holding companies and two railroads were formally merged, and in January 1998 the remaining intermediate holding company was folded into the railroad.

Robert D. Krebs of Santa Fe Pacific was president of BNSF from the merger until 1999, chief executive from the merger until 2000, and chairman from 1997 until 2002. He was succeeded in all three positions by Matthew K. Rose.

On November 3, 2009, Berkshire Hathaway made a $26 billion offer to buy the remaining 77.4% of Burlington Northern Santa Fe Corporation it did not already own, valuing the purchase at $34 billion. The deal, which including Berkshire's previous investment and the assumption of $10 billion in Burlington Northern debt brings the total value to $44 billion.[46] Consummated February 12, 2010, it is the largest acquisition in Berkshire Hathaway's history.[47]

The deal was structured so that the Burlington Northern Santa Fe Corporation would merge with and into R Acquisition Company, LLC, an indirect, wholly owned subsidiary of Berkshire Hathaway. The deal closed on February 12, 2010, and at the same time, the now merged company changed its name to Burlington Northern Santa Fe, LLC that remains an indirect, wholly owned subsidiary of Berkshire Hathaway.[48]

The BNSF 'heritage' logo found on an EMD SD70MAC. The colors of the logo represented the railroads that are part of BNSF

With BNSF's large system, it hauls many different commodities, most notably coal and grain, as well as intermodal freight.

Predecessor Burlington Northern Railroad (BN) entered Wyoming's low-sulfur coal-rich Powder River Basin in the 1970s through construction of the Powder River Basin Joint Line with Union Pacific Railroad predecessor Chicago and North Western Transportation Company. Coal goes north in unit trains on the three-to-four-track Joint Line to Gillette or south to Orin, where older BN lines and other railroads take it in all directions to coal-burning power plants.[49]

BNSF serves over 1,500 grain elevators, located mostly in the Midwest on former BN lines.[50] Depending on where the markets are, this grain may move in any direction in unit trains or wait in silos for demand to rise. Most commonly, grain may move west on the Northern Transcon to the Pacific Northwest and its export terminals, or south to ports in Texas and the Gulf of Mexico.[49]

The Atchison, Topeka and Santa Fe Railway's main contribution to BNSF was the Southern Transcon, a fast intermodal corridor connecting Southern California and Chicago. Most traffic is either trailers of trucking companies such as intermodal partner J. B. Hunt, or containers from the Ports of Long Beach and Los Angeles. The latter begins its trip on the triple-track Alameda Corridor, shared with the Union Pacific Railroad, and then follows BNSF rails from downtown Los Angeles.[49] Its route, the Southern Transcon, has been almost completely double-tracked, and triple-tracking has begun in areas such as Cajon Pass.

BNSF transports Boeing 737 fuselages from the Wichita, Kansas plant to Renton, Washington.[51]

BNSF ES44DC 7402 leads a train of Boeing 737 fuselages at Greenwood, Nebraska in October 2014.

An eastbound BNSF Railway train passes some maintenance of way equipment in Prairie du Chien, Wisconsin, August 8, 2004. The lead unit is painted in the Heritage II scheme.

The BNSF Railway directly owns and operates track in 28 U.S. states: Alabama, Arizona, Arkansas, California, Colorado, Idaho, Illinois, Iowa, Kansas, Louisiana, Minnesota, Mississippi, Missouri, Montana, Nebraska, Nevada, New Mexico, North Dakota, Oklahoma, Oregon, South Dakota, Tennessee, Texas, Utah, Washington, Wisconsin, and Wyoming. The railway also operates a small amount of track in Canada, including an approximate 30-mile (48 km) section that runs from the U.S.–Canada border to Vancouver, British Columbia, some tracks and a yard in Winnipeg, Manitoba, approximately 70 miles (110 km) of joint track with the Canadian National Railway, which runs south to the U.S. border at Emerson, Manitoba, and less than a kilometer of trackage at the border in Northgate, Saskatchewan.

For administrative purposes, BNSF is divided into two regions and ten operating divisions. The North Region includes the Montana, Northwest, Twin Cities, Heartland and Powder River divisions. The South Region includes the Red River, California, Chicago, Kansas and Southwest divisions. Each division is further divided into subdivisions, which represent segments of track ranging from 300-mile (480 km) mainlines to 10-mile (16 km) branch-lines. The former Texas and Gulf divisions were combined into the Red River Division, and the former Springfield and Nebraska divisions were combined into the Heartland Division, in the spring of 2016.

Not including second, third and fourth main-line trackage, yard trackage, and siding trackage, BNSF directly owns and operates over 24,000 miles (39,000 km) of track. When these additional tracks are counted, the length of track which the railway directly controls rises to more than 50,000 miles (80,000 km).

Additionally, BNSF Railway has gained trackage rights on more than 8,000 miles (13,000 km) of track throughout the United States and Canada. These rights allow the BNSF to operate its own trains with its own crews on competing railroads' main tracks. BNSF locomotives also occasionally show up on competitors' tracks throughout the United States and Canada by way of leases, mileage equalizations, and other contractual arrangements.

BNSF 880362, a DOT-111 tank car passing Glen Haven, Wisconsin, shows the new corporate logo on June 3, 2006.

BNSF operates various facilities all over the United States, plus a yard in Winnipeg, to support its transportation system. Facilities operated by the railway include yards and terminals throughout its rail network, system locomotive shops to perform locomotive service and maintenance, a centralized operations center for train dispatching and network operations monitoring in Fort Worth, and regional dispatching centers.

BNSF Railway also operates numerous transfer facilities throughout the western United States to facilitate the transfer of intermodal containers, trailers, and other freight traffic. BNSF Railway has direct control over a total of 33 intermodal hubs and 23 automotive distribution facilities.

The BNSF mechanical division operates 13 locomotive maintenance facilities that perform preventive maintenance, repairs and servicing of equipment. The largest of these facilities are located in Alliance, Nebraska and Argentine Yard in Kansas City, Kansas. The mechanical division also controls 46 additional facilities responsible for car maintenance and daily running repairs.

The BNSF system mechanical division, a subset of the mechanical division, operates two maintenance-of-way work equipment shops, responsible for performing repairs and preventive maintenance to BNSF's track and equipment, in Brainerd, Minnesota and Galesburg, Illinois. The system mechanical division also operates the Western Fruit Express Company's refrigerated car repair shop in Spokane, Washington.

On October 1, 2022, BNSF Railway announced plans to construct a $1.5 billion state of the art master planned rail facility in Southern California, the first such facility developed by a Class I railroad. The Barstow International Gateway, encompassing approximately 4,500 acres (1,800 ha, 7.0 sq mi), an integrated rail facility, will be located on the west side of Barstow, California. This new facility, when built, will enable more efficient rail operations from the Port of Los Angeles and Port of Long Beach to trains for transport through the Alameda Corridor onto the BNSF mainline to the new facility, and then move across the nation on the eastbound BNSF route network.[53][54]

Pasco Yard

Large freight car hump yards are located throughout the BNSF system.[55]

• Barstow, California – Barstow Yard
• Galesburg, Illinois – Galesburg Yard
• Kansas City, Kansas – Argentine Yard
• Lincoln, Nebraska – Hobson Yard
• Memphis, Tennessee – Tennessee Yard
• Minneapolis, Minnesota – Northtown Yard
• Pasco, Washington – Pasco Yard
• Tulsa, Oklahoma – Cherokee Yard

Location of some intermodal yards:

• Cicero, Illinois – Chicago Cicero[56]
• Chicago, Illinois – Corwith Intermodal Facility
• Commerce, California
• Edgerton, Kansas – Logistics Park Kansas City[57]

A second-generation Electro-Motive Diesel (EMD) yard-switching engine at Hobson Yard in Lincoln, Nebraska. This is EMD GP28-2 (GP28M) low emissions BNSF H4 1524.

• Elwood, Illinois – Logistics Park Chicago[58]
• Hodgkins, Illinois – Willow Springs Intermodal Facility
• Haslet, Texas – Alliance Yard
• Los Angeles, California – Hobart Yard
• Memphis, Tennessee
• Oakland, California – Oakland International Gateway
• Omaha, Nebraska - Gibson Yard
• Seattle, Washington – Seattle International Gateway (SIG) Intermodal Facility

• The Northern Transcon runs between Seattle and Chicago. The route is a combination of parts of the old Great Northern, the Northern Pacific, and the Spokane, Portland and Seattle Railway.
• The Southern Transcon runs between Los Angeles and Chicago. The 2006 BNSF Annual Report states: "We also added about 33 miles of second main track on our main line between Chicago and Los Angeles. All but 51 miles (82 km) of this high-volume 2,200-mile (3,500 km) route were double track, as of the end of 2006. Last year, we ran 100 trains per day on this expanded main line, compared with 60 per day in 2000." Technically, it is not double tracked in mid-Kansas where two routes are used: Mulvane to Wichita to Newton to Emporia for primarily eastbound traffic; Emporia to El Dorado to Augusta to Mulvane for primarily westbound traffic. In 2008, BNSF completed nearly sixteen miles (26 km) of a third main track through Cajon Pass in Southern California, increasing capacity on the transcontinental main route between Chicago and Los Angeles from 100 to 150 trains per day. BNSF started adding a second main track in Abo Canyon (east of Belen, New Mexico) the largest bottleneck on the Transcon with grading in 2008–2009, bridges in 2010 and signal work in late 2010 or early 2011. Approximately 1.7 million cubic yards (1.3 million cubic metres) of rock need to be excavated, mostly by blasting. The 2008 BNSF Annual Report states: "Following completion of the Abo Canyon project scheduled in 2011, our 2,200‑mile [3,540 km] Transcontinental Corridor between Southern California and Chicago will have only about 30 miles [48 km] of single track."
• The Powder River Basin supplies forty percent of the coal in the United States. The 2008 BNSF Annual Report states that the quadruple track project was completed.

The BNSF system is divided into 13 divisions grouped into three regions. Each division includes numerous subdivisions, normally comprising a single main line and branches.[59] A fourteenth division, Colorado, has been consolidated with the Powder River Division, except for the Casper and Cody Subdivisions, which were transferred to the Montana Division.

BNSF 5696 pulling a Metrolink train in the aftermath of the 2015 Oxnard train derailment

BNSF directly operates the BNSF Railway Line for Metra in Chicago and the Sounder in the Puget Sound Region — using BNSF-supplied crews in addition to running over its rails. The company's network additionally hosts other commuter trains, including: Metrolink in Southern California, and the Northstar Line in Minneapolis.

The line used by New Mexico Rail Runner Express was sold to the state of New Mexico, but BNSF retained all freight rights on the line and operates freight trains as needed.

Metra's cars that were originally purchased by BNSF predecessor Chicago Burlington & Quincy have letterboards above the doors. In about 2011, about 15 of the remaining cars had the original "BURLINGTON" lettering restored, while the rest now read "BNSF RAILWAY". Other Metra cars assigned to BNSF have the current BNSF "swoosh" logo next to the door.

Many Amtrak routes use BNSF rails: the Amtrak Cascades, California Zephyr, Carl Sandburg, Coast Starlight, Empire Builder, Heartland Flyer, Illinois Zephyr, Lincoln Service, Pacific Surfliner, San Joaquin, Southwest Chief, Sunset Limited, and Texas Eagle.

After the 2015 Oxnard train derailment, BNSF loaned 40 of their AC4400CWs to Metrolink while their Rotem cab cars received upgrades. These 40 units were converted to PTC. The locomotives have since been returned after the cab cars went back into service.

Although it does not have a steam program like the Union Pacific, the BNSF has allowed for the Southern Pacific 4449, St. Louis–San Francisco 1522, Santa Fe 3751, Spokane, Portland and Seattle 700 and Milwaukee Road 261 steam locomotives to operate excursions over their rails.

BNSF has received E.H. Harriman Award for safety multiple times. But a number of accidents and incidents have occurred on the railway since its inception.

As one of the leading supporters of the Operation Lifesaver program to promote safety at railway crossings and rights-of-way, the BNSF Railway, in 2000, established a grade-crossing closure program. This program, in which BNSF works with communities and landowners to identify unnecessary or redundant crossings, has helped close more than 2,900 of BNSF's railway crossings throughout the United States. Due to the program, BNSF has been the industry leader in lowering the number of grade-crossing collisions.

BNSF contracts with News Link, a small business in Lincoln, Nebraska, to publish employee newsletters focused on safety for some of the railroad's divisions and shops. These newsletters vary in length from four to 28 pages, published ranging from monthly to quarterly.

In 2014, the Occupational Safety and Health Administration ordered BNSF to pay over $526,000 to workers who had been terminated in 2010 and 2011 after revealing workplace injuries at the terminal in Havre, Montana, which is in contravention of provisions of the Federal Railroad Safety Act protecting whistleblowers.[62]

In August 2016, a "huge number" of used hypodermic drug needles were found along BNSF railroad bridge in between the University Park and St. Johns neighborhoods of Portland, Oregon that has become an encampment for homeless individuals. According to a conductor quoted by The Oregonian "Pretty much see people down there at all hours of the night. We report them but nobody does anything."[63]

According to the 2007 BNSF Annual Report, at the end of 2007 the railway had more than 40,000 employees; 6,400 locomotives (8,359 as of 2018); and 85,338 freight cars (72,369 as of 2018).

• Broken down by specific kind of car, the BNSF owned:
  • 36,439 covered hoppers
  • 13,690 gondolas
  • 11,428 open hoppers
  • 10,470 flatcars
  • 7,948 boxcars
  • 4,196 refrigerated "reefer" cars
  • 427 tank cars
  • 416 automobile carriers
  • 81 private/business cars
  • 324 "other" types of cars
• In addition, the railroad also owned:
  • 3,253 domestic containers
  • 11,714 domestic chassis (Swap body) (?)
  • 4,070 company service vehicles
  • 1,200 trailers
  • 163 commuter passenger cars

At the end of 2007, the average age (from date of manufacture) was 15 years for the BNSF's locomotive fleet and 14 years for the freight car fleet.

On January 24, 2006, BNSF announced a US$2.4 billion program of infrastructure upgrades for 2006. The upgrade program includes: double- and triple-tracking 40 miles (64 km) of track and a second mainline track through New Mexico's Abo Canyon on the former ATSF transcontinental line; expanding the Lincoln, Nebraska, classification yard and double- and triple-tracking 50 miles (80 km) of track in Wyoming's Powder River Basin region; expansions at eight of the railroad's larger intermodal facilities, and extending many sidings and expanding and improving refueling facilities. In making the announcement, BNSF chairman Matthew K. Rose cited improvements in the company's return on invested capital and expressed hope for continued improvement.[64] In March 2008, the railroad was completing the triple-tracking of Cajon Pass in California, creating four tracks through the pass—three BNSF (former Santa Fe and newly installed) and one Union Pacific (former Southern Pacific).