ClubSwan 36

The ClubSwan 36 is a Finnish sailboat that was designed by Juan Kouyoumdjian as a one design racer and first built in 2018. Giovanni Belgrano was the principal engineer and aerodynamic expert, while Hervé Devaux designed the rig.[1][2][3][4]

ClubSwan 36
Development
DesignerJuan Kouyoumdjian
LocationFinland
Year2018
Builder(s)Oy Nautor AB
RoleRacer
NameClubSwan 36
Boat
Displacement6,923 lb (3,140 kg)
Draft9.02 ft (2.75 m)
Hull
Typemonohull
Constructionglassfibre
LOA36.09 ft (11.00 m)
LWL34.74 ft (10.59 m)
Beam11.81 ft (3.60 m)
Engine typeNanni Industries 14 hp (10 kW) diesel engine
Hull appendages
Keel/board typeFin keel with weighted bulb
Ballast2,564 lb (1,163 kg)
Rudder(s)Dual spade-type rudders
Rig
Rig typeBermuda rig
I foretriangle height43.01 ft (13.11 m)
J foretriangle base15.65 ft (4.77 m)
P mainsail luff49.21 ft (15.00 m)
E mainsail foot19.03 ft (5.80 m)
Sails
SailplanFractional rigged sloop
Mainsail area635 sq ft (59.0 m2)
Jib/genoa area361 sq ft (33.5 m2)
Gennaker area1,422 sq ft (132.1 m2)
Upwind sail area996 sq ft (92.5 m2)
Downwind sail area2,057 sq ft (191.1 m2)

Production

The design has been built by Oy Nautor AB in Finland, since 2018. It was fist publicly shown in Scarlino, Italy on 3 May 2018. As of 2023 it remains in production.[1][3][5][6]

Design

The ClubSwan 36 is a racing keelboat, built predominantly of glassfibre, with infused E-glass epoxy corecell foam with carbon fibre reinforcement on the keel grid and also in the lateral bulkhead. It has a fractional sloop rig, with a deck-stepped mast, one set of swept spreaders and carbon fibre spars, including a retractable carbon fibre bowsprit. The standing rigging is made from rod. The hull has a reverse stem; an open plumb transom; dual internally mounted spade-type rudders controlled by a tiller with an extension and a very high aspect ratio fixed, fin, steel keel with a weighted lead bulb. It also has a single, movable "C" shaped hydrofoil which allows negative leeway to be achieved. It displaces 6,923 lb (3,140 kg) and carries 2,564 lb (1,163 kg) of ballast.[1][3][4][7]

The boat has a draft of 9.02 ft (2.75 m) with the standard keel. It is equipped with seven Harken winches, two for the runners, two for the mainsail and two for the jib or spinnaker. The seventh winch is centrally located forward to control the C-shaped hydrofoil, the halyards and the other lines.[1][3]

The boat is fitted with a French Nanni Industries diesel engine of 14 hp (10 kW) with a retractable drive shaft and three-bladed fixed prop, for docking and manoeuvring. The fuel tank holds 11 U.S. gallons (42 L; 9.2 imp gal). A 14 hp (10 kW) Torquedo electric motor driven by a BMW battery is optional.[1][3][7]

The design has a minimalist interior without specific crew accommodations. The manufacturer terms it a "Protected Shelter ... a dry space to rest between races or during longer delivery."[3]

For sailing downwind the design may be equipped with an asymmetrical spinnaker of 1,422 sq ft (132.1 m2), flown from the bowsprit.[1][3]

The design has a hull speed of 7.90 kn (14.63 km/h), although it can exceed 20 kn (37 km/h) while planing.[1][3]

The one design class rules limit the crew to seven people, the number professional crew members to three people and crew weight to 1,124 lb (510 kg). It also limits the sails carried to five: one mainsail, two jibs and two spinnakers.[4][7][6]

Operational history

The boat has been sailed as part of the ClubSwan Racing season and also the Nations League 2023 for the Nations Trophy, as well as it own class European championships.[8]

In a 2018 review, Scuttlebutt Sailing News reported, "the ClubSwan 36 is more than just a new boat. It is a statement. Fusing the best attributes of dinghy and keelboat sailing with the exhilaration of foil assistance makes this yacht the most innovative entry-level one design sports boat of its era."[7]

In a 2020 review for Yachting World, Matthew Sheahan wrote, "designed as a high-performance one design, its hull and deck lines are in keeping with some of the more radical styles out there among boats like the Fast 40+ Rán VII and more recently Alex Thomson's IMOCA 60 Hugo Boss."[4]

See also

References

  1. McArthur, Bruce (2023). "ClubSwan 36". sailboatdata.com. Archived from the original on 11 June 2023. Retrieved 11 June 2023.
  2. McArthur, Bruce (2023). "Juan Kouyoumdjian". sailboatdata.com. Archived from the original on 13 June 2023. Retrieved 13 June 2023.
  3. Nautor. "ClubSwan 36". nautorswan.com. Archived from the original on 11 June 2023. Retrieved 11 June 2023.
  4. Sheahan, Matthew (20 February 2020). "ClubSwan 36 review: This one-design foiler from Nautor really shakes things up". Yachting World. Archived from the original on 11 June 2023. Retrieved 11 June 2023.
  5. McArthur, Bruce (2023). "Nautor (Swan sailboats)". sailboatdata.com. Archived from the original on 7 April 2022. Retrieved 11 June 2023.
  6. "The New ClubSwan 36 Makes Its Debut". North Sails. 10 May 2018. Archived from the original on 11 June 2023. Retrieved 11 June 2023.
  7. "Revealing the all new ClubSwan 36". Scuttlebutt Sailing News. 12 June 2018. Archived from the original on 11 June 2023. Retrieved 11 June 2023.
  8. Nautor Swan (16 December 2022). "ClubSwan Racing's 2023 season has something for everyone". Sail World. Archived from the original on 11 June 2023. Retrieved 11 June 2023.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.