U.S. Route 6 in Connecticut

US 6 enters Connecticut paired with US 202 from the town of Southeast, New York, just east of the village of Brewster. The concurrency runs for 3.8 miles (6.1 km) through the city of Danbury as a minor arterial road before it forms a 3.3-mile (5.3 km) four-way concurrency with I-84 and US 7 from I-84 exit 4 to exit 7. At exit 7, US 7 and US 202 split to the north, while US 6 stays duplexed with I-84 for another 0.8 miles (1.3 km) before returning to surface roads at exit 8. The route then goes through the towns of Bethel and Newtown. In Newtown, it has a 2.8-mile (4.5 km) concurrency with Route 25 before turning east toward the village of Sandy Hook, where it enters I-84 once again for 6.4 miles (10.3 km) between Newtown and Southbury (from exits 10 to 15).

After exiting I-84 in Southbury, US 6 once again becomes a surface road and is duplexed with Route 67 for 2.7 miles (4.3 km). It then passes through the northern Waterbury area suburbs of Woodbury, Watertown, and Thomaston. US 6 has a one-mile (1.6 km) overlap with the Route 8 expressway in Thomaston.

After leaving the Route 8 expressway, US 6 continues as an alternating two- and four-lane surface road through the towns of Plymouth, Bristol, and Farmington. In Farmington, it once again joins I-84 at exit 38 for 13.4 miles (21.6 km), passing through West Hartford, Hartford, and East Hartford. US 44 joins for 0.25 miles (0.40 km) to cross the Connecticut River on the Bulkeley Bridge from Hartford to East Hartford toward Bolton just past the eastern terminus of I-384.

In Bolton, US 6 and US 44 split. US 44 follows a more northerly route while US 6 continues through Bolton, Coventry, Andover, and Columbia. It intersects with Route 316 and Route 87 along the way and mostly follows the Hop River.

The US 6 Willimantic bypass begins in Columbia, at a four-way at-grade intersection with Route 66. The expressway starts out heading northeast and immediately crosses into Coventry. After crossing the town line, the eastbound and westbound sides of US 6 split, with a hill in between them. At the split, the eastbound side of the expressway curves and heads east. At this point, Hop River State Park Trail passes under both sides of the expressway. Soon after, the westbound lane also curves, and the two sides of the expressway soon become parallel again. The expressway then passes over Flanders River Road about 0.25 miles (0.40 km) east. The expressway then crosses the Willimantic River and enters the town of Windham. Right after entering Windham, it overpasses the New England Central Railroad. Immediately after this, there is an interchange with Route 32. After the interchange, the expressway enters Mansfield and passes under Mansfield Avenue before encountering another interchange for Route 195. The eastbound exit and westbound entrance use Mansfield City Road, while the westbound exit accesses Route 195 via North Frontage Road and eastbound access to US 6 is from Route 195 itself. Soon after the eastbound entrance ramp joins US 6, the expressway crosses the Natchaug River and once again enters Windham. The US 6 Willimantic bypass ends 0.5 miles (0.80 km) after entering Windham at an interchange with the eastern end of Route 66, whose roadway US 6 assumes east of the interchange. US 6 then continues as a surface road through the towns of Chaplin, Hampton, and Brooklyn. In Killingly, US 6 becomes a two-lane freeway in the vicinity of its junction with I-395 in Killingly, part of which (0.34 mi or 0.55 km) is duplexed with Route 12. Just before the Rhode Island state line, the unsigned portion of the Connecticut Turnpike (SR 695) merges into US 6 eastbound as it enters the town of Foster

The sign at the start of the bypass in North Windham

I-84 was to be an expressway that would connect the modern I-384 with the modern US 6 Willimantic bypass. From here, I-84 would continue to Providence, Rhode Island. This idea was planned in the 1960s but abandoned in 2005.

The Connecticut Department of Transportation (CTDOT) had planned since the 1960s to upgrade the segment between Bolton and Columbia to an expressway, connecting I-384 to the existing expressway segment in Windham. However, this particular segment of US 6 passes through an environmentally sensitive area centered around the Hop River. Construction had been planned to begin in the late 1980s, but federal, state, and local officials could not reach an agreement on a feasible route that avoided the Hop River wetlands and development within the towns of Andover, Bolton, Coventry, and Columbia. The affected towns, CTDOT, and the Connecticut Department of Environmental Protection (DEP) favored a northern alignment (Alternative 133B), which would avoid the town centers and nearby wetlands. The Environmental Protection Agency, U.S. Army Corps of Engineers (USACE), and Federal Highway Administration (FHWA) favored a southerly alignment (Alternative 133 18/25) that would cut through residential and commercial areas as well as the Hop River's adjoining wetlands.

Despite opposition from CTDOT, DEP, and affected towns, the FHWA issued a record of decision and USACE issued required permits for Alternative 133 18/25 (southern alignment) in 2001. State and local officials continued to press USACE to approve the northern alignment. Due to the impasse between state, local, and federal officials, federal funds for the bypass were withdrawn in 2003. In 2005, the Capitol Region Council of Governments and CTDOT removed the US 6 bypass from planning, hence CTDOT effectively abandoned further study of the bypass in lieu of upgrading the existing road.

In 2007, CTDOT began making safety improvements and capacity upgrades to the existing US 6 through Andover, Bolton, and Columbia.