Ranger 16
The Ranger 16 is an American sailboat, that was designed by Gary Mull and first built in 1987.[1][2][3][4]
| Development | |
|---|---|
| Designer | Gary Mull |
| Location | United States |
| Year | 1987 |
| Builder(s) | Ranger Yachts |
| Name | Ranger 16 |
| Boat | |
| Crew | two |
| Displacement | 450 lb (204 kg) |
| Draft | 2.95 ft (0.90 m) centerboard down, 0.43 ft (0.13 m) centerboard up |
| Hull | |
| Type | Monohull |
| Construction | Fiberglass |
| LOA | 16.67 ft (5.08 m) |
| Beam | 6.00 ft (1.83 m) |
| Hull appendages | |
| Keel/board type | retractable centerboard |
| Rudder(s) | transom-mounted rudder |
| Rig | |
| General | Fractional rigged sloop |
| Sails | |
| Total sail area | 154 sq ft (14.3 m2) |
Production
The boat was built by Ranger Yachts in the United States, starting in 1987, but is now out of production.[1][4][5]
Design
The Ranger 16 is a small recreational dinghy, built predominantly of fiberglass. It has a fractional sloop rig, a transom-hung rudder and a retractable centerboard keel. It displaces 450 lb (204 kg).[1][4]
The boat has a draft of 2.95 ft (0.90 m) with the centerboard down and 0.43 ft (0.13 m) with it up.[1][4]
See also
References
- Browning, Randy (2016). "Ranger 16 sailboat specifications and details". sailboatdata.com. Archived from the original on 14 November 2021. Retrieved 22 September 2016.
- McArthur, Bruce (2021). "Garry Mull (1939-1994)". sailboatdata.com. Archived from the original on 18 April 2021. Retrieved 20 December 2021.
- Sea Time Tech, LLC (2021). "Gary Mull". sailboat.guide. Archived from the original on 20 December 2021. Retrieved 20 December 2021.
- Sea Time Tech, LLC (2022). "Ranger 16". sailboat.guide. Archived from the original on 3 March 2022. Retrieved 3 March 2022.
- McArthur, Bruce (2021). "Ranger Yachts (USA)". sailboatdata.com. Archived from the original on 13 November 2021. Retrieved 13 November 2021.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.