White River Bridge

The White River Bridge was built in 1929 in Mount Rainier National Park as part of the Yakima Park Road project. The new road was planned to open up access to the northeastern portion of the park. The bridge, spanning the White River, was built by contractor John D. Tobin of Portland, Oregon, who had previously built the Narada Falls Bridge and the Christine Falls Bridges, both listed on the National Register of Historic Places. Plans for the bridge were drawn by the National Park Service Branch of Plans and Designs in the National Park Service Rustic style, with construction supervision by NPS landscape architect Ernest A. Davidson. The three-centered arch spans 60 feet (18 m), with a stone-faced concrete structure.[2]

This article is about the bridge in Washington state. For other White River Bridges, see White River Bridge (disambiguation).

White River Bridge
White River Bridge is located in Washington (state)
White River Bridge
Nearest cityWhite River Entrance, Washington
Coordinates46°53′53″N 121°37′08″W
Arealess than one acre
Built1929
Architectural styleRustic style
MPSMount Rainier National Park MPS
NRHP reference No.91000200 [1]
Added to NRHPMarch 13, 1991

The bridge was placed on the National Register of Historic Places on March 13, 1991. It is part of the Mount Rainier National Historic Landmark District, which encompasses the entire park and which recognizes the park's inventory of Park Service-designed rustic architecture.[1]

See also

References
  1. "National Register Information System". National Register of Historic Places. National Park Service. March 13, 2009.
  2. Fitzsimons, Gray; Stupich, Martin (August 2, 1983). "Pacific Northwest Regional Office Inventory: White River Bridge". National Park Service.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.