CSS Animations
CSS Animations
CSS animations allows animation of most HTML elements without using JavaScript or Flash!
Browser Support for Animations
The numbers in the table specify the first browser version that fully supports the property.
Numbers followed by -webkit-, -moz-, or -o- specify the first version that worked with a prefix.
| Property | |||||
|---|---|---|---|---|---|
| @keyframes | 43.0 4.0 -webkit- |
10.0 | 16.0 5.0 -moz- |
9.0 4.0 -webkit- |
30.0 15.0 -webkit- 12.0 -o- |
| animation | 43.0 4.0 -webkit- |
10.0 | 16.0 5.0 -moz- |
9.0 4.0 -webkit- |
30.0 15.0 -webkit- 12.0 -o- |
What are CSS Animations?
An animation lets an element gradually change from one style to another.
You can change as many CSS properties you want, as many times you want.
To use CSS animation, you must first specify some keyframes for the animation.
Keyframes hold what styles the element will have at certain times.
The @keyframes Rule
When you specify CSS styles inside the @keyframes
rule, the animation will gradually change from the current style to the new style
at certain times.
To get an animation to work, you must bind the animation to an element.
The following example binds the "example" animation to the <div> element. The animation will last for 4 seconds, and it will gradually change the background-color of the <div> element from "red" to "yellow":
Example
/* The animation code */
@keyframes example {
from {background-color: red;}
to {background-color: yellow;}
}
/* The element to apply the animation to */
div {
width: 100px;
height: 100px;
background-color: red;
animation-name: example;
animation-duration: 4s;
}
Try it Yourself »
Note: The animation-duration property
defines how long time an animation should take to complete. If the animation-duration property is not specified,
no animation will occur, because
the default value is 0s (0 seconds).
In the example above we have specified when the style will change by using the keywords "from" and "to" (which represents 0% (start) and 100% (complete)).
It is also possible to use percent. By using percent, you can add as many style changes as you like.
The following example will change the background-color of the <div> element when the animation is 25% complete, 50% complete, and again when the animation is 100% complete:
Example
/* The animation code */
@keyframes example
{
0% {background-color: red;}
25% {background-color: yellow;}
50% {background-color: blue;}
100% {background-color: green;}
}
/* The element to apply the animation to */
div {
width: 100px;
height: 100px;
background-color: red;
animation-name: example;
animation-duration: 4s;
}
Try it Yourself »
The following example will change both the background-color and the position of the <div> element when the animation is 25% complete, 50% complete, and again when the animation is 100% complete:
Example
/* The animation code */
@keyframes example
{
0% {background-color:red; left:0px; top:0px;}
25% {background-color:yellow; left:200px; top:0px;}
50% {background-color:blue; left:200px; top:200px;}
75% {background-color:green; left:0px; top:200px;}
100% {background-color:red; left:0px; top:0px;}
}
/* The element to apply the animation to */
div {
width: 100px;
height: 100px;
position: relative;
background-color: red;
animation-name: example;
animation-duration: 4s;
}
Try it Yourself »
Delay an Animation
The animation-delay property specifies a delay for the start of an animation.
The following example has a 2 seconds delay before starting the animation:
Example
div {
width: 100px;
height: 100px;
position: relative;
background-color: red;
animation-name: example;
animation-duration: 4s;
animation-delay: 2s;
}
Try it Yourself »
Negative values are also allowed. If using negative values, the animation will start as if it had already been playing for N seconds.
In the following example, the animation will start as if it had already been playing for 2 seconds:
Example
div {
width: 100px;
height: 100px;
position: relative;
background-color: red;
animation-name: example;
animation-duration: 4s;
animation-delay: -2s;
}
Try it Yourself »
Set How Many Times an Animation Should Run
The animation-iteration-count property specifies the number of times an animation should run.
The following example will run the animation 3 times before it stops:
Example
div {
width: 100px;
height: 100px;
position: relative;
background-color: red;
animation-name: example;
animation-duration: 4s;
animation-iteration-count: 3;
}
Try it Yourself »
The following example uses the value "infinite" to make the animation continue for ever:
Example
div {
width: 100px;
height: 100px;
position: relative;
background-color: red;
animation-name: example;
animation-duration: 4s;
animation-iteration-count:
infinite;
}
Try it Yourself »
Run Animation in Reverse Direction or Alternate Cycles
The animation-direction property specifies
whether an animation should be played forwards, backwards or in alternate
cycles.
The animation-direction property can have the following values:
normal- The animation is played as normal (forwards). This is defaultreverse- The animation is played in reverse direction (backwards)alternate- The animation is played forwards first, then backwardsalternate-reverse- The animation is played backwards first, then forwards
The following example will run the animation in reverse direction (backwards):
Example
div {
width: 100px;
height: 100px;
position: relative;
background-color: red;
animation-name: example;
animation-duration: 4s;
animation-direction:
reverse;
}
Try it Yourself »
The following example uses the value "alternate" to make the animation run forwards first, then backwards:
Example
div {
width: 100px;
height: 100px;
position: relative;
background-color: red;
animation-name: example;
animation-duration: 4s;
animation-iteration-count: 2;
animation-direction:
alternate;
}
Try it Yourself »
The following example uses the value "alternate-reverse" to make the animation run backwards first, then forwards:
Example
div {
width: 100px;
height: 100px;
position: relative;
background-color: red;
animation-name: example;
animation-duration: 4s;
animation-iteration-count: 2;
animation-direction:
alternate-reverse;
}
Try it Yourself »
Specify the Speed Curve of the Animation
The animation-timing-function property specifies the speed curve of the
animation.
The animation-timing-function property can have the following values:
ease- Specifies an animation with a slow start, then fast, then end slowly (this is default)linear- Specifies an animation with the same speed from start to endease-in- Specifies an animation with a slow startease-out- Specifies an animation with a slow endease-in-out- Specifies an animation with a slow start and endcubic-bezier(n,n,n,n)- Lets you define your own values in a cubic-bezier function
The following example shows the some of the different speed curves that can be used:
Example
#div1 {animation-timing-function: linear;}
#div2
{animation-timing-function: ease;}
#div3 {animation-timing-function:
ease-in;}
#div4 {animation-timing-function: ease-out;}
#div5
{animation-timing-function: ease-in-out;}
Try it Yourself »
Specify the fill-mode For an Animation
CSS animations do not affect an element before the first keyframe is played or after the last keyframe is played. The animation-fill-mode property can override this behavior.
The animation-fill-mode property specifies a
style for the target element when the animation is not playing (before it
starts, after it ends, or both).
The animation-fill-mode property can have the following values:
none- Default value. Animation will not apply any styles to the element before or after it is executingforwards- The element will retain the style values that is set by the last keyframe (depends on animation-direction and animation-iteration-count)backwards- The element will get the style values that is set by the first keyframe (depends on animation-direction), and retain this during the animation-delay periodboth- The animation will follow the rules for both forwards and backwards, extending the animation properties in both directions
The following example lets the <div> element retain the style values from the last keyframe when the animation ends:
Example
div {
width: 100px;
height: 100px;
background: red;
position: relative;
animation-name: example;
animation-duration: 3s;
animation-fill-mode: forwards;
}
Try it Yourself »
The following example lets the <div> element get the style values set by the first keyframe before the animation starts (during the animation-delay period):
Example
div {
width: 100px;
height: 100px;
background: red;
position: relative;
animation-name: example;
animation-duration: 3s;
animation-delay: 2s;
animation-fill-mode: backwards;
}
Try it Yourself »
The following example lets the <div> element get the style values set by the first keyframe before the animation starts, and retain the style values from the last keyframe when the animation ends:
Example
div {
width: 100px;
height: 100px;
background: red;
position: relative;
animation-name: example;
animation-duration: 3s;
animation-delay: 2s;
animation-fill-mode: both;
}
Try it Yourself »
Animation Shorthand Property
The example below uses six of the animation properties:
Example
div
{
animation-name: example;
animation-duration: 5s;
animation-timing-function: linear;
animation-delay: 2s;
animation-iteration-count: infinite;
animation-direction: alternate;
}
Try it Yourself »
The same animation effect as above can be achieved by using the shorthand
animation property:
Test Yourself with Exercises!
CSS Animation Properties
The following table lists the @keyframes rule and all the CSS animation properties:
| Property | Description |
|---|---|
| @keyframes | Specifies the animation code |
| animation | A shorthand property for setting all the animation properties |
| animation-delay | Specifies a delay for the start of an animation |
| animation-direction | Specifies whether an animation should be played forwards, backwards or in alternate cycles |
| animation-duration | Specifies how long time an animation should take to complete one cycle |
| animation-fill-mode | Specifies a style for the element when the animation is not playing (before it starts, after it ends, or both) |
| animation-iteration-count | Specifies the number of times an animation should be played |
| animation-name | Specifies the name of the @keyframes animation |
| animation-play-state | Specifies whether the animation is running or paused |
| animation-timing-function | Specifies the speed curve of the animation |
