Like any other type of dog, pit bulls need to be groomed and bathed regularly. Because they have short fur and natural oils that protect their fur and skin, they do not need to be bathed too often. They can be bathed as often as once a month, or as infrequently as every 6 months. Of course, if they are outside a lot or play in the mud, you will need to bathe them more often. Regardless of how often you choose to bathe your pit bull, you should be sure to brush them daily to remove dead hair and to distribute their natural oils throughout their coat. When it comes time for a bath, you can make it a more pleasurable experience for both of you by preparing ahead of time and remaining calm during the bath. A few treats will make it easier as well.[1]

Method 1
Method 1 of 2:

Preparing for the Bath

  1. 1
    Get in the right frame of mind. Pit bulls are known to be stubborn, so you will have to be firm and consistent when getting them used to bathing.
    • Set aside enough time for the bath, since you will be less stressed if you are not pressed for time.
    • Maintain control of the situation and let your pit bull know that you are in charge.[2]
    • It is easier if you can get your pit bull used to baths when they are young.
  2. 2
    Introduce your dog to the bath routine. If your dog runs away and hides when it is bath time, you will need to approach the situation with a calm demeanor and incorporate lots of rewards and treats.[3]
    • Be calm; talk with your pet in a reassuring voice. If you are low key and not agitated, your dog is more likely to remain somewhat calm as well.
    • Coax your pit bull into an empty tub and reward them with a treat. It is useful to do this for a few times a day in the week leading up to the bath. Let your pit bull just spend time in an empty tub.
    Advertisement
  3. 3
    Select an appropriate shampoo for your pit bull. Do not use human shampoo for your dog, because ingredients in them (like fragrance) can irritate your pit bull’s skin.[4]
    • Read all instructions on the shampoo to see whether it needs to be diluted. You can also check the label to see how long the shampoo should remain on the dog before rinsing.[5]
    • Ask your veterinarian for recommendations on shampoos that would work well for your pit bull. [6]
  4. 4
    Put on old clothes. Odds are, you will get as wet as your dog during the bath. If you have on old clothes, or even a bathing suit, you will be happier after the bath.
  5. 5
    Gather your supplies and prepare the bathtub. The whole bathing process will go more smoothly if you have everything you need and aren’t rushing around trying to find extra towels or dog shampoo.
    • Have extra towels nearby and lining the floor, so no one slips during or after the bath.
    • Place a non-skid mat in your tub so your dog doesn’t slip and get hurt during the bath.
    • Keep your dog’s brush and shampoo within reach, so your pet doesn’t escape the tub while you go searching for the shampoo.
    • Stock some treats in the bathroom to use as rewards during the bath.
  6. 6
    Take your dog for a long walk or run. After vigorous exercise, your dog won’t have as much energy to resist a bath. Additionally, if they are hot and sweaty, they may welcome a bath.[7]
  7. 7
    Brush your pit bull thoroughly. Although brushing your pit bull should be a regular part of your grooming routine, it is also important to brush your pit bull right before bath time. [8]
    • This pre-bath brushing will help remove any dead hair.
    • Matted hair will hold onto water and not dry well, resulting in irritated skin. By brushing before the bath, you can eliminate this issue.[9]
  8. Advertisement
Method 2
Method 2 of 2:

Cleaning Your Pit Bull

  1. 1
    Bring your dog into the bathroom and shut the door. You want to make it as difficult as possible for your dog to escape the bath, so closing bathroom doors will help you in this endeavor.
  2. 2
    Remove your dog’s collar and put a leash or tether on your dog. A leather collar can shrink when wet and irritate your dog’s skin. You can replace it with a temporary nylon collar.
    • Leashing your dog will keep them in place and help prevent them from escaping. This will help keep things less messy, and it can prevent injury from a wet dog running around the bathroom or house.[10]
    • If your dog tends to bite when in the bath, consider using a muzzle at bathtime.
  3. 3
    Protect your dog’s ears and eyes. Water can irritate the delicate membranes in a dog’s eyes and ears. Keep this in mind as you’re bathing your pit bull.
    • Because pit bulls are prone to ear infections, you need to keep their ears dry. Place a cotton ball in each of your pit bull’s ears to keep out water. Be sure the cotton balls are large enough not to be caught or lost in the ear canal.[11]
    • Avoid spraying water directly on your pit bull’s head. This will help keep your dog’s eyes, mouth, and ears dry during the bath as well.
  4. 4
    Fill the tub with three or four inches of warm water and start the bath. Like people, dogs want to be comfortable; keep this in mind when setting your water temperature.
  5. 5
    Saturate your dog’s skin. Use a detachable shower spray nozzle or pitcher to completely wet your dog’s skin from the neck down (thus avoiding the eyes and ears).
    • Use a washcloth to gently wipe off your pit bull’s face, head, and around the ears.[12]
  6. 6
    Work in the shampoo from neck to tail. Gently massage in the shampoo and distribute it thoroughly. Some dog owners like to use rubber bath brushes or massage gloves for applying shampoo. They can help distribute the shampoo more evenly and stimulate circulation.[13]
  7. 7
    Rinse thoroughly, since any soap left on the skin can be irritating. Watch the water as it goes into the tub, and rinse until it runs clear.
    • Rinse your dog’s head first, making sure to cover their eyes with one hand to prevent water from getting in them.
    • If your dog is really muddy or dirty, you can repeat the shampoo step.
  8. 8
    Dry your dog and reward them for finishing the bath. After you’ve both survived the bath, you can relax and enjoy your fresh-smelling pit bull.
    • Use your hands to squeeze or pat away excess water from your pit bull’s body.
    • Gently remove the cotton balls from your pit bull’s ears, and dry them to remove any lingering water.
    • Wrap your dog in a large, absorbent towel to thoroughly dry them.
    • Some owners use a pet dryer or blow dryer on a low setting, but you must take care to watch the heat so your dog isn’t burned.
    • Give a few treats and kisses for their good behavior in the tub.
    • You can also crate your dog on a towel to help them dry without getting water all over the house.[14]
  9. Advertisement

Community Q&A

  • Question
    My pit bulls hair is extremely hard to get wet! His fur is almost water-resistant. I don't have a hose or anything, what can I do?
    Community Answer
    Community Answer
    My boxer has the same problem. What I do is fill the bathtub with water, and before putting him in the tub, I rub in the shampoo deeply, and then soak him in the water while scrubbing the fur.
  • Question
    Is the skin of pitbulls more sensitive than that of most dogs?
    Community Answer
    Community Answer
    Pitbulls are generally more prone to things such as skin allergies, so yes, their skin is more sensitive than other dogs.
  • Question
    What if you can only wash your pitbull outside?
    Scarlett
    Scarlett
    Community Answer
    Then make sure it is in a area where you can grab the pitbull quickly and it can't run away. Attach it to a short leash for maximum protection.
Advertisement

Warnings

Advertisement

About This Article

Terryl Daluz
Co-authored by:
Owner, Wash My Dog Pet Grooming
This article was co-authored by Terryl Daluz. Terryl Daluz is the Co-owner of Wash My Dog LLC Pet Grooming, a pet grooming business based in the Los Angeles, California area. Terryl, along with co-owner Andrea Carter, has over three years of pet grooming and management experience. Wash My Dog and its certified pet groomers and bathers specialize in providing both a safe and welcoming environment for all animals they service. This article has been viewed 81,926 times.
7 votes - 100%
Co-authors: 12
Updated: August 5, 2020
Views: 81,926
Categories: Washing Dogs | Dog Breeds
Article SummaryX

If you need to bathe your pit bull, place a towel or a non-skid mat in your tub, then bring the dog into the bathroom and shut the door. Fill the tub with 3-4 inches of warm water and coax or carry the dog into the bathtub. Once the dog is in the water, use a handheld showerhead or a pitcher to wet the dog from the neck down. Wash the dog’s face with a washcloth, then apply shampoo all over the dog, from its neck to its tail. Work the shampoo into a lather, then rinse the soap away thoroughly. Dry the dog, then reward it for finishing the bath! Read on for tips from our Veterinary co-author on getting your dog ready for a bath, like taking it for a long walk first!

Did this summary help you?
Advertisement