How to Clean a Platinum Diamond Ring

Co-authored by Edward Lewand

Last Updated: March 24, 2021 References

Diamond rings look gorgeous in platinum settings. Yet, certain tasks and even everyday dirt can take away the shine and sparkle of your valuable ring. When this happens, it's time to clean your platinum diamond ring with care! You can clean your jewelry yourself one to two times per week, or whenever you notice that your ring is looking dull. You should use soap and water the most often to clean your ring, and an ammonia or household cleaner solution sparingly when you need a more effective method. ^{[1]
X
Research source} You should also visit a jeweler one to two times per year to have your ring professionally cleaned and checked.^{[2]
X
Research source}

Method 1

Method 1 of 4:

Using Soap and Water

1
Make a mild degreaser. Fill a bowl of water about 3/4 full with warm water. Add a few drops of a gentle dish soap such as Dawn.^{[3]
X
Expert Source

Edward Lewand
Graduate Gemologist & Accredited Appraiser
Expert Interview. 6 August 2019.} Soak the jewelry for at least a 30 minutes for a good result.^{[4]
X
Research source}
- The dish soap will make the ring slippery, so if there is a sink you are using, make sure that the drain is plugged.
2
Scrub the ring with a soft-bristled toothbrush. If you have sensitive skin, you may want to wear gloves. Use a clean, soft-bristled toothbrush to be used only for cleaning your jewelry.^{[5]
X
Expert Source

Edward Lewand
Graduate Gemologist & Accredited Appraiser
Expert Interview. 6 August 2019.} Wet the toothbrush in the solution. Clean the ring over the bowl, using gentle circular motions.^{[6]
X
Trustworthy Source
Gemological Institute of America
Nonprofit institute responsible for gemological research and education and setting gemstone buying and selling standards
Go to source}
- Pay special attention to places that are hard to reach, like the inside of the setting and undersides of the diamonds.
Advertisement
3
Dry the ring. Allow the ring to air dry. Alternatively, you can use a soft, dry lint-free cloth to remove moisture from the ring. If you’re in a hurry, you can blow-dry it.^{[7]
X
Research source}
- If you’re allowing the ring to air dry, place it somewhere safe on a dry lint-free cloth. Don’t put it somewhere it can be easily knocked down, like on the edge of a counter. Don’t set it near a sink with an unplugged drain.

Method 2

Method 2 of 4:

Using an Ammonia Solution

1
Make sure your ring is compatible. Do not use ammonia if your ring contains other gems besides diamonds. Diamonds are hard gems, which won’t be damaged by ammonia. If your ring includes softer materials like opals, emeralds, pearls, or onyx, you should stick to a cleaning method that doesn’t include ammonia.^{[8]
X
Research source}
- You can find out the hardness of gemstones by looking up their rating on a gem hardness scale. However, you should know for certain that the stones in your ring are the natural gemstones you’re identifying them as. If in doubt, use a gentler cleaning method such as soap and water instead, or consult with a professional jeweler first to verify what stones are in your ring.^{[9]
  X
  Research source}
2
Soak the jewelry in diluted ammonia. Fill a glass bowl with equal parts cold water and ammonia. Don’t fill the bowl all the way to the top, or you won’t be able to move the bowl easily without spilling it. Put your ring into the bowl of solution. Set the bowl somewhere away from children and pets and allow your ring to soak for 30 minutes.^{[10]
X
Research source}
- After half an hour, put on rubber gloves and plug the sink drain before you retrieve the ring. Or, remove the ring with tongs.
3
Make a scrubbing solution. Once you’ve soaked your ring to loosen any built-up grime, it’s time to scrub that grime away! Fill a glass bowl about 3/4 full with hot water. Add a splash of ammonia and a squirt of dishwashing liquid – exact measurements aren’t needed. Just don’t pour so much ammonia that you can’t handle the strong odor of it.^{[11]
X
Research source}
4
Gently clean the ring. Wear gloves to protect your hands. Use a light scrubbing motion to clean the ring with a soft-bristled toothbrush.^{[12]
X
Research source} Clean well on the inside of the ring underneath the setting. Scrub the back of any diamonds if you can, and pay special attention to any hard-to-reach nooks.^{[13]
X
Research source}
5
Rinse and dry the ring. Rinse your ring in a bowl of plain water. Make sure that you rinse it well enough that all of the solution is washed away. Plug the sink drain before attempting to retrieve the ring. Set your ring aside in a secure place to air dry.^{[14]
X
Research source}
- You can use a dry lint-free cloth or blow dryer if you want to resume wearing the ring immediately.

Method 3

Method 3 of 4:

Using Diluted Household Cleaner

1
Choose a household cleaner. Check the list of ingredients. It’s fine if the product contains ammonia as long as your ring only has diamonds and no other gemstones. However, the cleaner should not have any chlorine bleach, which can negatively affect metal in your diamond’s setting.^{[15]
X
Trustworthy Source
Gemological Institute of America
Nonprofit institute responsible for gemological research and education and setting gemstone buying and selling standards
Go to source} The cleaner’s label should indicate that it is non-caustic.^{[16]
X
Research source}
- This method will work for hard gems such as diamonds, rubies, sapphires, blue topaz, amethyst, and tanzanite. Don’t use this method for soft gemstones like pearls, onyx, emeralds, or opals.^{[17]
  X
  Research source}
- If in doubt about whether to use a certain cleaning agent, you can call a professional jeweler. Try saying, “I have a diamond and platinum ring. Could you tell me if I can use diluted (name of cleaner) to clean my ring in between professional cleanings? I see from the ingredients that the cleaner doesn’t contain any chlorine bleach.”
2
Dilute the cleaner and soak the jewelry. In a jar, mix approximately 2/3 parts water with 1/3 parts of the household cleaner. Place the jar out of reach of children and pets. Leave the jewelry in the jar of solution to soak for at least several hours, ideally overnight.^{[18]
X
Research source}
3
Clean the jewelry over a protected drain. Cover the sink drain with a wash cloth or sink stopper. You should wear rubber gloves in order to protect your skin from the chemicals in the solution and to get a better grip on the ring. Take the ring out of the solution. Hold it firmly and run it under cold water.^{[19]
X
Research source}
- Gently scrub the ring with a wet washcloth or a soft-bristled toothbrush. Make sure to clean the underside well.
4
Dry your ring. Set the jewelry aside in a safe, secure place to dry. You may choose to use a soft, dry lint-free cloth and/or blow-dry it if you want to put it back on right away. Make sure to thoroughly clean the jar before reusing it.^{[20]
X
Research source}

Method 4

Method 4 of 4:

Maintaining a Clean Ring

1
Visit a jeweler annually. Take your ring to a professional jeweler at least annually, if not twice per year. Have them professionally clean your ring. It's wise to visit a jeweler if the dirt on your ring is a compacted layer of dirt or oil.^{[21]
X
Research source}
- Ask them to check your settings as well. Have your jeweler make any necessary adjustments to keep the stones secure.^{[22]
  X
  Research source}
2
Avoid touching your diamond(s). Touch your diamonds as little as possible, even when your hands are clean. Grease accumulates easily on the material of a diamond. The natural oils in your skin can cloud the diamond’s surface.^{[23]
X
Trustworthy Source
Gemological Institute of America
Nonprofit institute responsible for gemological research and education and setting gemstone buying and selling standards
Go to source}
- You may actually want to clean your jewelry more often, such as twice a week, when it's new. Even a thin film can cloud your diamond's luster, and people may want to touch your ring when you show it off...especially if you just got engaged or married!
3
Be careful with ultrasonic cleaners. Ultrasonic cleaners use sound waves and a vibrating solution to remove built-up grime. However, they can loosen or chip mounted diamonds if you’re not cautious! Before using an ultrasonic cleaner, you should ensure that your diamond has not been treated, does not include feathers, and your ring is in solid condition.^{[24]
X
Trustworthy Source
Gemological Institute of America
Nonprofit institute responsible for gemological research and education and setting gemstone buying and selling standards
Go to source}
- If your ring came with a grading report, check it to see whether your diamond has been treated. Don’t use ultrasonic cleaners if the report indicates that your diamond was enhanced through fracture-filling.
- If your diamond has feather inclusions, don’t use ultrasonic cleaners. “Feathers” are very small cracks in the diamond. You can look for diamond feathers using a 10x jewelry loupe, however the feathers may not be visible from every angle.^{[25]
  X
  Research source}
- It’s best to ask your jeweler to inspect your diamond ring before using an ultrasonic cleaner. Ask them to look for any diamond feathers. You should also ask them to inspect your ring’s setting as well; if there are any loose stones, get them tightened.
4
Protect your ring. Remove your ring and put it in a safe, secure place when you are doing a task that requires getting your hands dirty or working with harsh or abrasive chemicals.^{[26]
X
Research source}
- For example, remove your ring when you are using cleaning products.
- You may also want to remove your ring before swimming in a chlorinated pool. Chlorine can damage some metals used in ring settings.^{[27]
  X
  Trustworthy Source
  Gemological Institute of America
  Nonprofit institute responsible for gemological research and education and setting gemstone buying and selling standards
  Go to source} Furthermore, swimming in cold water shrinks your fingers temporarily, so it would be easier for your ring to slip off.^{[28]
  X
  Research source}
- Remove your ring when you are doing a task wherein your hands can accumulate grime, such as gardening or making dough.

Expert Q&A

Question

How can I clean my platinum diamond ring at home?

Edward Lewand
Graduate Gemologist & Accredited Appraiser
Edward Lewand is a Graduate Gemologist & Accredited Appraiser with over 36 years of experience in the jewelry industry. He completed his residency in graduate gemology at the G.I.A. in 1979, New York and now specializes in Fine, Antique and Estate Jewelry, consultations and expert witness work. He is a Certified Appraiser of the Appraiser Association of America (AAA) and an Accredited Senior Appraiser (ASA) of the American Society of Appraisers In Gems and Jewelry.

Edward Lewand

Graduate Gemologist & Accredited Appraiser

Expert Answer

Don’t use toothpaste or boiling water to clean your jewelry since these things could damage it.

Warnings

When using ammonia or other household cleaning products, make sure to follow the safety instructions on the product labels.

⧼thumbs_response⧽
Helpful 0 Not Helpful 2