How to Cut Granite

Granite is a hard rock that's tough to cut through, but you don't need to be a stonemason to cut it yourself. With a circular saw and a diamond-cut blade, you can make clean and precise cuts.[1] As long as you take the right precautions, you can turn cutting granite into a safe and enjoyable DIY project.

Part 1
Part 1 of 4:

Taking Safety Precautions Before You Cut

  1. Image titled Cut Granite Step 1
    1
    Wear safety goggles and a dust mask while handling the saw. This will keep granite dust from harming or irritating your eyes while you cut. If you're working in a dusty area, put on a dust mask as well to keep your lungs clear.
    • You may also want to wear earplugs or protectors if you are sensitive to loud noises.
  2. Image titled Cut Granite Step 2
    2
    Do not wear gloves while using a saw. No gloves are strong enough to protect your fingers, and gloves will weaken your grip on the saw. Keep your hands bare and free of any bracelets and other jewelry to avoid snagging your hands on the blade.[2]
    Advertisement
  3. Image titled Cut Granite Step 3
    3
    Tie back any loose hair and avoid wearing baggy clothing. Take off all accessories, especially face and hand jewelry, before you use the saw. Roll up your sleeves so your forearms are bare to keep any fabrics from getting caught in the saw.[3]
  4. Image titled Cut Granite Step 4
    4
    Check the saw for the correct blade before cutting the granite. Make sure you have fitted your saw with a diamond-cut blade in the right size. The wrong size or type of blade can damage your saw and potentially result in injury.[4]
    5. Advertisement
Part 2
Part 2 of 4:

Measuring and Positioning the Cut

  1. Image titled Cut Granite Step 5
    1
    Use a tape measure or straightedge to plan your cut. Between the options, a straightedge is preferred because it can keep your line more even when you're ready to mark it. Position the tape measure or straightedge slightly to the left of the line you want so you can mark the line with tape later.[5]
  2. Image titled Cut Granite Step 6
    2
    Place a line of tape directly to the right of the tape measure or straightedge. Painter's tape or masking tape is ideal because it is easier to readjust. Apply it as close to the measuring tool as possible to keep your line straight and even.
  3. Image titled Cut Granite Step 7
    3
    Draw a straight line over the tape with a marker. This is the line your saw will follow as you make your cut. Use the measuring tool to keep the marker line straight as you draw it over the tape. If you mess up on the line, remove the tape, reapply a new strip, and start over.[7]
    • Avoid drawing directly on the granite. If you make a mistake on the line, it will be harder to remove.
  4. Image titled Cut Granite Step 8
    4
    Use a diamond-cut blade to cut the granite. Granite is one of the most difficult rocks to cut because it is so hard. Most saw blades will not be equipped to cut granite without damaging them. Fit your saw with a diamond-cut blade for the sake of precision and safety.[8]
  5. Image titled Cut Granite Step 9
    5
    Position your circular saw over the granite. Before you turn on the saw, it should not touch the granite. It should, however, hover directly overhead. Line up your saw blade as closely with your marked line as you can so your cut starts and ends even.[9]
    6. Advertisement
Part 3
Part 3 of 4:

Cutting the Granite with a Circular Saw

  1. Image titled Cut Granite Step 10
    1
    Turn on your saw and begin cutting the granite. Carefully move your blade into the granite without using heavy pressure. Guide it along the line as evenly as possible for an accurate cut.[10]
    • Stand to the side of the saw instead of directly behind to protect yourself from kickback.[11]
  2. Image titled Cut Granite Step 11
    2
    Spray the granite lightly with water. Have a partner spray the granite with a spray bottle as you cut through the line. This will keep the saw blade from overheating from pressure.[12]
    • If you don't have a partner, rent a wet saw. Wet saws spray water over the rock and blade as you cut.[13]
  3. Image titled Cut Granite Step 12
    3
    Always use both hands while operating the saw. This will give you maximum control over it to prevent slipping or kickback. Although you can use a circular saw with one hand, you will not be able to make a safe or accurate cut.[14]
  4. Image titled Cut Granite Step 13
    4
    Stay concentrated on the blade as you cut through the granite. Never look away from the saw while it's still on. A moment's distraction can result in damage to your project or even serious injury. Avoid forcing your saw through the rock too quickly, as going too fast can cause kickback, which may injure you or damage the granite.
  5. Image titled Cut Granite Step 14
    5
    Inspect your finished cut. If it looks satisfactory, begin prepping your next cut or wrapping up your project. If you notice any uneven lines or are otherwise unsatisfied with your cut, however, mark the areas you want to fix and re-cut the granite.[15]
    6. Advertisement
Part 4
Part 4 of 4:

Making Finer Cuts with Smaller Tools

  1. Image titled Cut Granite Step 15
    1
    Use a dry cut diamond angle grinder to make smaller cuts. An angle grinder is better than a saw at trimming granite or making cuts that do not go through the entire slab. Choose an angle grinder equipped with a dry cut diamond wheel, which is strong enough to cut through stone.[16]
  2. Image titled Cut Granite Step 16
    2
    Hold the granite slab on a flat surface while using the angle grinder. Clamp the granite slab firmly to a flat surface (like a workbench) and move the angle grinder gently across the granite where you want to make your cut. Apply light pressure to the granite, and stop every 10-20 seconds to prevent going too quickly or putting too much weight on the granite.
  3. Image titled Cut Granite Step 17
    3
    Drill holes in granite using a 1⁄8 inch (0.32 cm) to 1.25 inches (3.2 cm) drill bit. Depending on your needs, these sizes offer enough range to drill into the granite without damaging it. Mark your measurements with painter's tape before you begin drilling so your holes stay even and precise.[17]
  4. Image titled Cut Granite Step 18
    4
    Drill straight down into the granite. If you angle the drill, you risk chipping or cracking the granite while drilling. Apply even pressure to the drill as you work downward, and drill slowly so the drill does not slip from its mark.[18]
    5. Advertisement

Expert Q&A
Did you know you can get premium answers for this article? Unlock premium answers by supporting wikiHow

  • Question
    What kind of saw do you need to cut granite?
    Gerber Ortiz-Vega
    Gerber Ortiz-Vega
    Masonry Specialist
    Gerber Ortiz-Vega is a Masonry Specialist and the Founder of GO Masonry LLC, a masonry company based in Northern Virginia. Gerber specializes in providing brick and stone laying services, concrete installations, and masonry repairs. Gerber has over four years of experience running GO Masonry and over ten years of general masonry work experience. He earned a BA in Marketing from the University of Mary Washington in 2017.
    Gerber Ortiz-Vega
    Gerber Ortiz-Vega
    Masonry Specialist
    Expert Answer

    Support wikiHow by unlocking this expert answer.

    I would recommend using a gas-powered saw with a 14-inch diamond blade, which will be able to cut through granite.
  • Question
    Can you cut granite yourself?
    wikiHow Staff Editor
    wikiHow Staff Editor
    Staff Answer
    This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.
    wikiHow Staff Editor
    wikiHow Staff Editor
    Staff Answer

    Support wikiHow by unlocking this staff-researched answer.

    Yes, but you’ll need lots of patience and the right tools for the job. You’ll also need to take safety precautions, such as wearing goggles, ear protection, and a dust mask.
  • Question
    What tools do I need to cut granite countertops?
    wikiHow Staff Editor
    wikiHow Staff Editor
    Staff Answer
    This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.
    wikiHow Staff Editor
    wikiHow Staff Editor
    Staff Answer

    Support wikiHow by unlocking this staff-researched answer.

    You’ll need a standard or wet-cut circular saw, as well as a sturdy work surface (such as a work bench), c-clamps (to secure the slab to your work surface), painter’s tape (to reduce chipping), markers and measuring tape, safety equipment (like goggles, ear protection, and a dust mask), and a shop vac for cleanup.
Advertisement

Warnings

  • Never cut granite with a dull blade, which can heighten the risk of kickback.
    ⧼thumbs_response⧽
  • Work slowly to prevent kickback or losing your grip on the blade.
    ⧼thumbs_response⧽
  • Do not use a circular saw while tired or under the influence of alcohol. A clear head is essential to working safely with a saw.
    ⧼thumbs_response⧽
Advertisement

Things You'll Need

  • Circular saw
  • Tape measure or straightedge
  • Painter's or masking tape
  • Marker
  • Spray bottle
  • Water
  • Goggles
  • Dust mask
  • Angle grinder
  • Drill

You Might Also Like

Hang Something on Brick
How to
Hang Something on Brick
Paint Cinder Blocks
How to
Paint Cinder Blocks
Build a Brick Wall
How to
Build a Brick Wall
Remove Efflorescence from Brick
How to
Remove Efflorescence from Brick
Drill Into BrickHow to Drill Into Brick: Preparation, Tools, and Best Methods
Stucco a House
How to
Stucco a House
Make Bricks from Concrete
How to
Make Bricks from Concrete
Build Brick Columns
How to
Build Brick Columns
Drill Through Granite
How to
Drill Through Granite
Hang on Stucco Without Drilling
How to
Hang on Stucco Without Drilling
Carve Stone
How to
Carve Stone
Cut Brick
How to
Cut Brick
Clean Soot from Brick
How to
Clean Soot from Brick
Nail Into Brick
How to
Nail Into Brick
Advertisement

References

  1. ↑ Gerber Ortiz-Vega. Masonry Specialist & Founder, GO Masonry LLC. Expert Interview. 10 March 2020.
  2. ↑ https://homesteady.com/how-6720078-cut-granite-slab.html
  3. ↑ http://safetytoolboxtopics.com/Small-Tools/dylan.html
  4. ↑ http://www.assh.org/handcare/hand-arm-injuries/Power-Saw-Injury-Prevention
  5. ↑ https://www.youtube.com/watch?v=sxE88zw35oU&feature=youtu.be&t=274
  6. ↑ Gerber Ortiz-Vega. Masonry Specialist & Founder, GO Masonry LLC. Expert Interview. 10 March 2020.
  7. ↑ http://imperfectlypolished.com/2012/08/15/how-to-cut-granite-and-a-master-bath-resource-list/
  8. ↑ Gerber Ortiz-Vega. Masonry Specialist & Founder, GO Masonry LLC. Expert Interview. 10 March 2020.
  9. ↑ https://homesteady.com/how-6720078-cut-granite-slab.html
  1. ↑ https://homesteady.com/how-6720078-cut-granite-slab.html
  2. ↑ http://safetytoolboxtopics.com/Small-Tools/dylan.html
  3. ↑ http://imperfectlypolished.com/2012/08/15/how-to-cut-granite-and-a-master-bath-resource-list/
  4. ↑ https://www.todayshomeowner.com/video/cutting-tile-or-brick-with-a-wet-saw/
  5. ↑ http://www.norbord.com/na/blog/circular-saw-safety-tips
  6. ↑ https://homesteady.com/how-6720078-cut-granite-slab.html
  7. ↑ https://www.familyhandyman.com/tools/power-tools/how-to-use-an-angle-grinder/view-all/
  8. ↑ https://homesteady.com/how-4844317-drill-holes-granite-countertop.html
  9. ↑ https://homesteady.com/how-4844317-drill-holes-granite-countertop.html

About This Article

Gerber Ortiz-Vega
Co-authored by:
Gerber Ortiz-Vega
Masonry Specialist
This article was co-authored by Gerber Ortiz-Vega. Gerber Ortiz-Vega is a Masonry Specialist and the Founder of GO Masonry LLC, a masonry company based in Northern Virginia. Gerber specializes in providing brick and stone laying services, concrete installations, and masonry repairs. Gerber has over four years of experience running GO Masonry and over ten years of general masonry work experience. He earned a BA in Marketing from the University of Mary Washington in 2017. This article has been viewed 118,975 times.
6 votes - 67%
Co-authors: 5
Updated: July 12, 2022
Views: 118,975
Categories: Brickwork and Stone Masonry
Article SummaryX

To safely cut granite, lay a piece of masking tape over the line you plan to cut, then draw a straight line over the tape with a marker. Fit your circular saw with a diamond-cut blade, then turn on the saw and carefully begin cutting into the granite. To keep the saw from overheating, either have someone else spray the granite with water, or use a wet saw, which will spray water as it cuts. Remember to wear safety goggles and a dust mask when you’re working with the saw, but do not wear gloves, as they’ll weaken your grip on the saw. For other safety tips, like not wearing jewelry and how to hold the saw, keep reading!

Did this summary help you?
Advertisement