How to Do a Waltz Jump in Figure Skating

Last Updated: July 3, 2022

The Waltz Jump is the first jump most figure skaters learn. It is a half revolution jump and is a gateway to many more complex jumps. This article will show how to do a waltz jump for right-handed skaters(counter-clockwise rotation).

Part 1

Part 1 of 3:

Preparing the Jump

1
Stand straight on the ice.
2
Stand on your left foot with your right leg behind you in a T stop position.

Advertisement
3
Walk through the jump. Without actually jumping off the ice, skate through the jump so you get comfortable with the motion.

Part 2

Part 2 of 3:

Performing the Jump

1
Push and glide on your left leg with the left leg being slightly bent and the right bent slightly behind you. Glide on an left outside edge in a curve slightly to the left. Your arms should be straightened behind you.
2
Kick your right leg up. Your right knee should go up in the air in front of you. As you bring your knee up, bring your arms close to your chest.
- Imagine that you are trying to get on a bike. This is one method of getting comfortable with the feeling of a waltz jump).
3
Swing your right foot over, and immediately bring your left foot over and extend it behind you. Keep in mind that you are not jumping yet, you are just getting the feel of the jump.
- As you start the take-off, you should be leaving the ice on your left toe-pick so it is the last part of your boot that leaves the ice. Never rise off the ground on a flat blade. Never think of rotation; if you are in the right starting position you will automatically make the half rotation necessary.
4
As you swing your right foot over, you are going to jump with your left foot before the right foot hits the ground. Don't get frustrated if it takes you some time, just keep practicing until you can go pretty high off the ground.
5
If you are stroking forward, do two or three powerful strokes and bend your knees. You're going to jump off the ground, lifting up your right leg, followed closely with your left leg. When you land, be sure to keep your right foot straight. After landing, you should be skating on your right leg with your left leg extended behind you, gliding backwards.
6
If you are doing backwards crossovers, they should be left over right. do three or four of these, and do a forward inside three turn as soon as you turn, jump with your right leg and land.

Part 3

Part 3 of 3:

Landing the Jump

1
Practice landing. The landing should start on your right toe-pick and should start rolling down to a flat blade on your right foot back outside edge. Never land on a flat blade as this will cause ankle, knee, and hip problems. You should be skating on your right leg with your left leg extended behind you, gliding backwards.
2
When you land, be sure to keep your right foot straight. It will be the first to land, and you obviously do not want to sprain it.
- You may not feel comfortable doing the jump starting on your left foot and landing on your right. This turns you in an anti-clockwise direction. If you generally turn in a clockwise direction try reversing these instructions and starting on your right foot and then landing on your left. Which ever you choose stick with it and if you try spinning on the ice make sure you're turning in the same direction. It doesn't matter which way you turn but you need to jump and spin the in the same direction.

Community Q&A

Question

Do you have to be advanced to do this sequence?

FigureSkater123

Community Answer

No, this is the first jump you will learn. You will learn just how to do some basic jumping first, but you will learn the waltz jump soon after.

Warnings

Some people skate left-handed. To perform this jump left-handed, simply switch the lefts in the directions to rights and vice versa. That is, spin clockwise, and land on the left leg, and pull the right leg back.

⧼thumbs_response⧽
Helpful 2 Not Helpful 0