This article was co-authored by wikiHow Staff. Our trained team of editors and researchers validate articles for accuracy and comprehensiveness. wikiHow's Content Management Team carefully monitors the work from our editorial staff to ensure that each article is backed by trusted research and meets our high quality standards.
wikiHow marks an article as reader-approved once it receives enough positive feedback. In this case, 93% of readers who voted found the article helpful, earning it our reader-approved status.
This article has been viewed 743,187 times.
Learn more...
You can make all kinds of candy at home, so why not try your hand at chewing gum? People have been chewing gum for medicinal purposes and to freshen their mouths for at least 5,000 years. Read on to learn how to make chewing gum three different ways: with gum base, beeswax, and sweet gum sap.
Ingredients
- 1/3 cup gum base
- 3/4 cup powdered sugar
- 3 tablespoons corn syrup
- 1 teaspoon glycerine
- 1/2 teaspoon citric acid
- 5 drops flavouring
- 1/2 cup beeswax (make sure it's food grade)
- 1 cup powdered sugar
- 3 tablespoons honey
- Peppermint or cinnamon extract
- Sweet gum sap
Steps
Classic Bubble Gum
-
1Heat the ingredients. Place the gum base, corn syrup, glycerine, citric acid and bubble gum flavoring in the top part of a double boiler. Place the double boiler on the stove and turn the burner to medium high. Stirring occasionally with a spoon, heat the mixture until it becomes warm and gooey.
- You can find gum base, glycerine and citric acid at candy supply stores or online retailers. Choose a classic bubble gum flavor or go for something unique, like lemon lime.
- You can also add a few drops of food coloring to the mixture to color your gum.
- Make a double boiler if you don't already have one by finding two pots, one small and one large. Fill the larger pot with a few inches of water and place it on the stove. Put the smaller pot inside the larger pot so that it's floating on the water. Place all of the ingredients except the powdered sugar in the smaller pot and turn on the burner. Bring the mixture up to temperature, stirring well.[1]
-
2Create a powdered sugar well. Set aside about a tablespoon of powdered sugar and pour the rest into a pile on a cutting board or another clean work surface. Use your fingers to create an indention in the powdered sugar pile.[2]Advertisement
-
3Pour the gum base into the well. Carefully pour the melted gum base directly from the double boiler into the powdered sugar well. Be careful not to get any water in the mixture.
-
4Make bubble gum dough. Dust your fingers with some powdered sugar and start kneading the gum base mixture and the powdered sugar together. Work the powdered sugar into the gum base until the base gets sticky, then add more powdered sugar and keep kneading. Knead for at least 15 minutes, until the dough is soft and pliable and no longer sticky.
- If you don't knead the dough enough, the gum will tend to fall apart, so don't skip this step.
- The dough should be smooth and stiff when you're finished.
-
5Roll out the dough. Place the dough in front of you, and place your hands palm-down on top of it. Roll the dough using your hands so that it becomes a long, thin rope. Try to roll it so that it's the same width down the length of the rope. Use a knife to cut the rope into bite-sized pieces.
- You can roll the dough flat using a rolling pin and cut it into neat squares if you'd like.
- Roll the pieces of dough into balls as an alternative.
-
6Finish the gum. Dust the gum pieces with powdered sugar to keep them from sticking to each other. Make small gum wrappers by cutting out squares of parchment paper, then wrap the gum pieces.
Natural Beeswax Gum
-
1Melt the wax. Place the wax in a double boiler. Put the double boiler on the stove and turn the burner to medium high. Melt the wax until it is soft and gooey.[3]
-
2Add the honey. Place the honey in the pot and stir it into the melted wax. You can substitute corn syrup for honey if you prefer.
-
3Add flavorings. Beeswax gum goes well with peppermint flavoring. You could also try cinnamon, lemon or licorice. Squeeze about five drops of flavoring into the pot with the melted wax and honey, and stir well.
- You can add finely chopped herbs, such as rosemary or mint leaves, to the mixture.
- For a medicinal gum, add extra peppermint oil and a few drops of lemon juice.
-
4Add the sugar. Stir powdered sugar into the melted gum base. The mixture should begin to thicken a bit. Taste the gum mixture and add more flavorings or powdered sugar if you'd like to increase the flavor or sweetness.
-
5Pour the gum base into molds. Use candy molds, an ice cube tray, or other small molds for the gum. Pour an equal amount of the gum base into each mold. Place the molds in the refrigerator to give the gum time to harden, then pop out the pieces when you're ready to chew them.[4]
Making Minimalist Sweet Sap Gum
-
1Locate a sweet gum tree. The sap from sweet gum trees has been used for medicinal purposes and to make chewing gum since ancient times. The sweetgum is a deciduous tree commonly found in North America.[5]
-
2Find a place where sap exits the tree. Sweetgum sap flows under the bark. You may be able to find a spot where the bark has been torn off and the sap is accessible. If not, use a pocketknife to remove the bark from a small area. You'll see runny sap underneath.
- Don't remove too much bark, or you'll damage the tree.
- Choose a spot high off the ground so that the area isn't accessible to animals.
-
3Wait for the sap to harden. Over the course of a few days, the exposed sap will begin to harden into a gum. Come back to the spot after about 3 days to check it. If the sap is still runny, wait a few more days. If it's hard, it's ready to be made into gum.
-
4Scrape the hardened resin from the tree. A pocketknife is a good tool for this. Catch the pieces of resin in your hand or a small container.
-
5Chew the resin. Place the pieces in your mouth and enjoy your minimalist gum.[6]
Community Q&A
-
QuestionIs the beeswax gum hard when it comes out of the mold?Community AnswerIt is harder than regular chewing gum, but softens as you chew it.
-
QuestionCan I substitute the powdered sugar with more honey, or anything else?Community AnswerThe reason you add powdered sugar is not only to give it a sweet taste, but because otherwise it would just be runny mixture, not dough. You cannot substitute with more honey. I suppose you could replace with ground rice flour or oat flour, but it might not be the same texture.
-
QuestionCan I use mastic instead of gum base?Community AnswerBe careful because many modern industrial products are called mastic. In the case of the non-toxic plant resin, it may be used to make chewing gum, however its properties do not allow it to be a substitute for gum in the same recipes, as it resembles more of a wax or gelatin. It can be used, but you'll need to change the recipe accordingly.
Things You'll Need
- Double boiler
- Spoon
- Cutting board
- Knife
- Parchment paper
References
- ↑ https://www.rachaelraymag.com/real-life/technique-how-to-diy-double-boiler
- ↑ http://www.cdkitchen.com/recipes/recs/30/Make-Your-Own-Bubble-Gum74922.shtml
- ↑ https://kaplifestyle.com/2014/05/23/chewing-gum-natural-gum-recipe/
- ↑ https://eatingrules.com/homemade-honeycomb-gum/
- ↑ https://www.ncbi.nlm.nih.gov/pmc/articles/PMC4441155/
- ↑ http://bushcraftusa.com/forum/showthread.php/36700-Harvesting-Chewing-Gum-from-the-Sweetgum
About This Article
To make bubble gum, start by heating gum base, corn syrup, glycerine, citric acid, and bubble gum flavoring in a double boiler until the mixture is gooey. Next, pour powdered sugar into a pile, make a well in the middle, and pour the gooey mixture into the well. Cover your hands in powdered sugar, then knead the ingredients into a dough. Finish by rolling out the dough into a long rope and cutting it into bite-sized pieces with a knife. For tips on how to make beeswax gum or Sweetgum sap gum, keep reading!