Unpoppable bubbles are bubbles made from corn syrup and dish soap that last longer than average. If you want to make unpoppable bubbles, you can do so with a few ingredients and supplies. After mixing your ingredients carefully, you can blow fun bubbles to play with as you wish.

Ingredients

  • 1/2 cup corn syrup
  • 3 cups of distilled water
  • 1 cup dish soap
Part 1
Part 1 of 3:

Mixing Your Ingredients

  1. 1
    Measure out your liquids. Get a measuring cup and measure out the corn syrup, water, and dish soap. Measure out these liquids, pour them in small bowls, and set them aside.
    • You can use distilled water or tap water from your sink.
    • If you don't have dish soap, it can be purchased at the grocery store. Corn syrup can be purchased here as well or you can buy it online.
  2. 2
    Add your ingredients in the right order. The order you add your ingredients to a mixing bowl matters in this project. Add the water first. Then, add the dish soap. Add the corn syrup last.[1]
    Advertisement
  3. 3
    Stir your ingredients very slowly. You do not want any bubbles to form while you're mixing your ingredients. If you stir too fast, bubbles will begin to form prematurely. Stir your ingredients slowly until you have an even mixture. This means everything should be one solid color and texture.[2]
    • Use a spoon to stir your ingredients.
  4. Advertisement
Part 2
Part 2 of 3:

Creating Your Bubbles

  1. 1
    Prepare your pipette. Take one plastic pipette. You can buy these objects at a local craft store or department store. Use a pair of scissors to cut off the tip of the wider end of the pipette. This is the end that is not already opened.[3]
    • Make sure to only trim the tip of the wide end. You do not want to cut off the entire wider part, as you'll be dipping this into your mixture. Once you're done, your pipette is now a bubble wand.
    • If you don't have a pipette, you can use a straw.
  2. 2
    Dip the wand into the mixture. Dip the tip of the wider end of the wand into the mixture. You only need to make one, quick dabbing motion to get the bubble mixture to spread on the pipette.[4]
    • You should have a layer of the bubble mixture covering the end of the wand, like the glass pane of a window. Dip the wand into the mixture again if you did not get the end fully covered.
  3. 3
    Blow your bubbles. Place your lips on the opposite end of the wand. Blow gently into the wand. A bubble should form and eventually break off.[5]
    • Make sure to blow into the wand slowly. Blowing too fast could cause your bubble to break before it forms.
  4. 4
    Enjoy your bubbles. Once you've blown as many bubbles as you want, you can play with them. You can bounce these bubbles up and down in your hands or throw them back and forth across the room. These bubbles should not rupture or pop as fast as regular bubbles.[6]
    • Remember, no bubbles are completely unpoppable. The bubbles will rupture with time, but they should last much longer than normal bubbles.
  5. Advertisement
Part 3
Part 3 of 3:

Dealing with Pitfalls

  1. 1
    Distill your water. Some people find the minerals from tap water can affect the quality of bubbles. You may want to purchase distilled water for the project. If you can't find distilled water at the store, you can distill water yourself at home.[7] Pour your water into a large pot with a glass lid. Do not fill the pot more than a third of the way full.[8]
    • Place a small glass bowl in the center of the pot. Then, put the pot's lid on upside down. This means the handle should be in the water.
    • Have an adult bring the water to a boil and, once it's boiling, turn the heat down to a simmer. Cover the lid with ice cubes. This will cause water to form on the lid and drip into your bowl.
    • Watch the pot, adding more ice cubes as they melt. Once the bowl is full, you can remove the bowl. Use the water in the bowl in your project.
  2. 2
    Experiment with different types of dish soap. Not all dish soaps will create the same effect. While making your unpoppable bubbles, be open to experimenting with a variety of brands of dish soap. If your bubbles did not turn out the way you wanted, try using a different dish soap.[9]
  3. 3
    Set the solution aside for stronger bubbles. You can set aside your solution for up to two days and still use it. In general, the longer you set your solution aside, the longer it will last. If you were unhappy with how long your bubbles lasted, try making the solution again and letting it sit for a while before blowing bubbles.[10]
  4. 4
    Make bubbles on warmer days. In general, warm and humid days will produce the best bubbles. While the solution will work in any weather, your bubbles should last longer during warmer months.[11]
    • You may want to play with your bubble solution inside on windy days. Wind can pop your bubbles.
  5. Advertisement

Community Q&A

  • Question
    What makes the bubbles unpoppable?
    Onóra
    Onóra
    Community Answer
    In short, bubbles pop when the soap film ruptures, which often happens via evaporation of the contained water. The use of a humectant (that is, a substance that attracts and retains the moisture in the air nearby through absorption) e.g. corn syrup, prevents evaporation and thus prolongs the film.
  • Question
    How can I freeze a strong bubble?
    Community Answer
    Community Answer
    Make sure the temperature is below 32 degrees and the bubble will freeze, no matter how tough.
  • Question
    Is there any alternative to the corn syrup?
    Community Answer
    Community Answer
    You could try dissolving corn starch in water. It would basically be the same thing.
Advertisement

Things You'll Need

  • Pipette/straw
  • Mixing bowls
  • Measuring cups
  • Spoon
  • ice cubes

About This Article

wikiHow Staff
Co-authored by:
wikiHow Staff Writer
This article was co-authored by wikiHow Staff. Our trained team of editors and researchers validate articles for accuracy and comprehensiveness. wikiHow's Content Management Team carefully monitors the work from our editorial staff to ensure that each article is backed by trusted research and meets our high quality standards. This article has been viewed 85,121 times.
69 votes - 84%
Co-authors: 5
Updated: March 29, 2019
Views: 85,121
Article SummaryX

To make unpoppable bubbles, start with 3 cups of distilled water and mix in 1 cup of dish soap. Then, add ½ cup of corn syrup and stir everything together. Make sure to stir the ingredients slowly so you don’t cause any small bubbles. To blow the unpoppable bubbles, cut the tip off the wider end of a plastic pipette. Finally, quickly dip the wide end of the pipette into the liquid mixture then blow through the narrow end to create the bubble. To learn how to create stronger bubbles using different types of dish soap solutions, read on!

Did this summary help you?
Advertisement