Beds are made in standard sizes, such as twin, full, queen and king sizes. It is recommended that you find a bed size that is at least four inches (10cm) longer than the tallest person who will sleep in it. The following measurements can be taken to ensure you get the right bed size.

Part 1
Part 1 of 2:

Measuring a Bed

  1. 1
    Strip the bed of all bedding. You will want to measure it from the exact edge.
  2. 2
    Grab a retractable measuring tape. You may ask a friend to help you hold the measuring tape if it does not lock into place.
    Advertisement
  3. 3
    Keep a pen and paper nearby to write down the measurements for future reference. You will be able to use these measurements to see what type of bed you have in the next step. Alternatively, you can measure a space in your house to see what size bed will fit comfortably in the room.
  4. 4
    Place one end of the measuring tape at the left side of the bed. Pull the tape out until it reaches the right edge of the bed. Write down this width measurement.
  5. 5
    Set the end of the tape at the middle top of the bed. Extend the tape till you get to the middle bottom of the bed. Write down this length measurement.
  6. Advertisement
Part 2
Part 2 of 2:

Determining Bed Size

  1. 1
    Determine if your small bed is a twin. Most twin beds are 39 inches (99 cm) wide, while a “narrow” twin is 36 inches (91 cm) wide. Standard length will be 75 inches (191 cm) long.
    • In the UK, a single bed is 36 inches (91 cm) wide.
    • An extra-long twin, like the beds in most dorm rooms, is 80 inches (203 cm) long. Look for sheet sets that say “x-long twin.”
    • This bed size is used for most standard bunk beds.
  2. 2
    Move on to a full size bed if the bed is 54 inches (137 cm) wide. It should also be 75 inches (191 cm) long. In England and occasionally in the US, this is referred to as a “double” bed.
    • While a twin bed fits one person, a full bed is best for one large person or two small children or adults.
  3. 3
    Increase your size to a queen bed if the width is 60 inches (152 cm). The length should be 80 inches (203 cm). If the length is 84 inches (213 cm), it is a California queen sized bed.
    • There is no equivalent to a queen sized bed in the UK. The next largest size is a king.
    • Another type of queen, called the “super,” or “expanded” queen is 66 inches (168 cm) wide and 80 inches (203 cm) long. The expanded is also thicker than the super or the standard queen.
    • Queen sized beds and larger are designed with enough room for two adults.
  4. 4
    Judge if your bed is a king size. If it is 76 inches (193 cm) wide and 80 inches (203 cm) long, it is a standard king. A UK king sized bed is much smaller at 60 inches (152 cm) wide and 78 inches (198 cm) long.
  5. 5
    Look through the additional options if your bed or space is even larger. A California king is 72 inches (183 cm) wide by 84 inches (213cm) long and a Grand king is 80 inches (203 cm) wide and 98 inches (249 cm) long. A super king bed in the UK is 72 inches (183 cm) wide and 78 inches (198 cm) long.[1]
  6. Advertisement

Community Q&A

  • Question
    My bed is 38 1/2" wide and 74 1/2" long. What size bed do I have?
    Community Answer
    Community Answer
    You have a twin bed. The exact measurements are 75" x 38" But not all mattresses (or measurements) are exact.
  • Question
    What size bed would be best for a room that is 9 feet long and 10 feet wide?
    Community Answer
    Community Answer
    Buy the largest bed that is best for whoever will be sleeping in the room. You could also put a full or queen size futon or sofa-bed in there. I have a queen bed in my guest room that is about the same size as your room; it literally takes up more than half the room, but my guests are comfortable.
  • Question
    How do I find out what size sheets I should buy for my bed?
    Community Answer
    Community Answer
    Usually, when you buy your bed it's labeled with the size. You can compare that to the sheet sizes. Another option is to measure your bed and match it to the sizes of the sheets.
Advertisement

Warnings

  • It is harder to find non-standard sheet sets, like those for the California queen, super king, or expanded queen. They are likely to be more expensive because of their large size and scarcity.
    ⧼thumbs_response⧽
Advertisement

Things You'll Need

  • Retractable measuring tape
  • Paper
  • Pencil

About This Article

Janice Tieperman
Co-authored by:
wikiHow Staff Writer
This article was co-authored by wikiHow staff writer, Janice Tieperman. Janice is a professional and creative writer who has worked at wikiHow since 2019. With both a B.A. and M.A. in English from East Stroudsburg University, she has a passion for writing a wide variety of content for anyone and everyone. In her free time, you can find her working on a new crochet pattern, listening to true crime podcasts, or tackling a new creative writing project. This article has been viewed 296,415 times.
3 votes - 100%
Co-authors: 11
Updated: February 23, 2021
Views: 296,415
Article SummaryX

To measure your bed, start by stripping the bedding so you can accurately measure it. Then, use a measuring tape to measure the length of your bed from the top edge straight down to the bottom edge. Next, measure the width by seeing how long your bed is from the left edge straight across to the right edge. You can then determine whether your bed is a standard twin, which is 75 inches long by 39 inches wide, or a standard full size, which is 75 inches long by 54 inches wide, or something else. To learn how to pick a bed that’s the right size for you and anyone who might be sharing your bed, keep reading!

Did this summary help you?
Advertisement