How to Open a Hood with a Broken Latch

A broken latch is a hassle and makes it impossible to get underneath your hood and fill your oil, jump-start your battery, and refill wiper fluid. If your hood isn't opening because of a broken release wire, you can often pull the wire yourself from inside the car. But if the latch is broken, you'll need to get your hands a bit dirty. Luckily, it's fairly simple to do and can bide you some time before you bring your car in for repair.

Part 1
Part 1 of 2:

Finding the Latch

  1. Image titled Open a Hood with a Broken Latch Step 1
    1
    Cool your engine for 30 minutes if it was running recently. Always let your engine cool off before you start poking around underneath the hood. If you used your vehicle recently, about 30 minutes should be enough. Without cooling, you risk burning yourself.[1]
    • If you can feel the heat of the engine against your car grill or bumper, talk to a mechanic about overheating.
  2. Image titled Open a Hood with a Broken Latch Step 2
    2
    Engage the hood release from the inside of your vehicle. If your car requires a release to open, locate it within your vehicle. In most cases, it's underneath the dashboard left of the steering column. Pull or press it and it should lift the hood 1 to 2 inches (2.5 to 5.1 cm) without completely disconnecting it from the latch.[2]
    • If you can't find the hood release, look at the driver's manual provided by your manufacturer. Either find the physical copy or look on their website for your car model's manual in electronic format.
    • If the hood release doesn't open your hood, the wire is probably broken.
    Advertisement
  3. Image titled Open a Hood with a Broken Latch Step 3
    3
    Find the latch from underneath your vehicle if it doesn't have grilles. If you have a mechanic's creeper—a mobile seat that helps you move while lying on your back—use it to roll yourself underneath the vehicle. If not, shimmy underneath on your back directly underneath the hood. At this point, you should be able to see a small hole with a small metal latch hanging down towards you.[3]
    • Give the ground a quick sweep before going under your car and wear clothes you don't mind getting dirty.
  4. Image titled Open a Hood with a Broken Latch Step 4
    4
    Locate the latch through your bumper if your vehicle has large grilles. If your vehicle has a grille with big enough openings, locate the broken latch from the front of your vehicle. Crouch down and look for the small metal latch directly underneath the spot where the front-center of the hood meets the car frame.[4]
    • If you're having trouble, follow the release cable—it connects to the latch from the driver's side of the car.
  5. Image titled Open a Hood with a Broken Latch Step 5
    5
    Remove your vehicle's grille to access the latch if you can't find it. Depending on the vehicle, you might be able to remove the grille without opening the hood. However, this only works for select models—refer to your vehicle's owner's manual or visit your manufacturer's website and locate information on hood removal. If you can access the screws holding your grille in place, you should be able to remove them with a Phillips head screwdriver. [5]
    • If you can see the latch and access it with a screwdriver, don't bother removing the grille.
    • Unscrew and remove the parking lamps and turn signal lights before attempting to remove the grill.
    6. Advertisement
Part 2
Part 2 of 2:

Tripping the Latch

  1. Image titled Open a Hood with a Broken Latch Step 6
    1
    Trip the latch with a screwdriver or long piece of metal. Reach toward the latch with a metal tool that is long enough to reach the latch—at least 10 inches (25 cm) should do the trick. Insert the metal piece in-between the latch and the metal piece it's hooked onto. Now, trip the latch by pressing it away from the hood.[6]
    • If you're having trouble, check the direction of the wire running from the latch—this is the direction you need to push the latch.
    • If the hood does not open after tripping the latch, bring your car to a mechanic.
  2. Image titled Open a Hood with a Broken Latch Step 7
    2
    Lubricate the latch with a lithium spray lubricant if it's jammed. Purchase a spray lubricant—ideally lithium-based—with a bendable straw at the nozzle at least 8 inches (20 cm) long. Insert it into your grill or from underneath your car and apply it generously to the latch. Often, broken or stuck latches can be remedied with lubrication.[7]
    • Be sure to wear safety goggles if you apply the lubricant from underneath the car.
    • Never use silicone spray as it can contaminate the oxygen sensor and impair engine performance.
  3. Image titled Open a Hood with a Broken Latch Step 8
    3
    Adjust the latch mechanism if it's misaligned. In many cases, latches don't work properly because they become misaligned. After locating the latch, loosen the bolts that hold it in place just enough that you can move it. Move it side-to-side so it aligns with the opening in the inner panel of the hood. Now, move the latch up and down until it fits flush between the fenders and the top of the hood while the hood is pressed upward. Finally, tighten the latch bolts.[8]
    • Open and close your hood afterward to ensure it works properly.
    4. Advertisement

Things You'll Need

  • Work gloves
  • Lithium spray lubricant with nozzle
  • Safety goggles
  • 10 inch (25 cm) Phillip's head screwdriver
  • Flashlight

Warnings

Advertisement

You Might Also Like

Reset Traction Control LightHow to Reset a Traction Control Light (TCS)
Fix a Locked Steering Wheel
How to
Fix a Locked Steering Wheel
Determine Gear Ratio
How to
Determine Gear Ratio
Reset Gas Gauge NeedleHow to Reset a Gas Gauge Needle
Change an Oxygen Sensor
How to
Change an Oxygen Sensor
Open the Hood of a VehicleHow to Unlock the Hood of Your Car
Fix a Cigarette Lighter in a Car
How to
Fix a Cigarette Lighter in a Car
Remove Rust from Chrome
How to
Remove Rust from Chrome
Reset Reduced Engine Power LightReduced Engine Power: What It Is and What to Do When You See the Warning Light
Push Start a Car
How to
Push Start a Car
How to
Jack Up a Car
Use a Slim Jim
How to
Use a Slim Jim
Repair Leather Car Seats
How to
Repair Leather Car Seats
Bleed Power Steering
How to
Bleed Power Steering
Advertisement

References

  1. ↑ https://www.farmers.com/learn/plan-and-prep/what-to-do-when-your-engine-overheats.html
  2. ↑ http://knowhow.napaonline.com/hood-latch-problems-solutions/
  3. ↑ https://www.popularmechanics.com/cars/how-to/a258/1362982/
  4. ↑ https://youtu.be/vfbZX4MqC70?t=74
  5. ↑ http://knowhow.napaonline.com/hood-latch-problems-solutions/
  6. ↑ https://youtu.be/mCQCatoG9Rc?t=32
  7. ↑ https://www.popularmechanics.com/cars/how-to/a258/1362982/
  8. ↑ https://www.automd.com/144/how-to-adjust-a-hood-release-latch/

About This Article

wikiHow Staff
Co-authored by:
wikiHow Staff
wikiHow Staff Writer
This article was co-authored by wikiHow Staff. Our trained team of editors and researchers validate articles for accuracy and comprehensiveness. wikiHow's Content Management Team carefully monitors the work from our editorial staff to ensure that each article is backed by trusted research and meets our high quality standards. This article has been viewed 117,116 times.
37 votes - 52%
Co-authors: 2
Updated: July 20, 2021
Views: 117,116
Categories: Car Maintenance and Repair
Advertisement