Keep track of the time with these simple Armitron watch instructions

Armitron is a popular watch brand that offers a variety of analog and digital watches. While each model is slightly different, most of them follow similar instructions when you're trying to set the time and date. In this article, we’ll explain how to change the date, day of the week, and time on your digital and analog Armitron watches.

Things You Should Know

  • On a digital sports watch, hold the Reset button until you hear a beep and press Mode to select the value you want to change. Make adjustments with the St/Stp button.
  • On an analog watch, pull the crown out to the first click to set the date, and to the second click to adjust the time.
  • If the standard method doesn’t work or you think your watch is malfunctioning, reach out to Armitron’s customer service and ask them to email you the manual you need.
Method 1
Method 1 of 2:

Sports Watch

  1. 1
    Hold the Reset button until the watch beeps. Locate the Reset button on the top left side of your Armitron watch. Hold the button for about 3 seconds or until it beeps. You should notice numbers on your screen start flashing.[1]
    • Depending on your watch model, the button may say Set instead of Reset.
    • This process should work for every Armitron watch, but the location and order of the specific buttons may be different (they’re labelled). For example, on some models, the Reset button is on the bottom left instead of the top left.
  2. 2
    Press the Mode button to choose the hours, minutes, day, or date. The Mode button is usually on the bottom right side of your Armitron sports watch. Each time you press the Mode button, a different section of your screen display will start flashing. This way, you can easily switch between changing the hour, minutes, day, and date. Keep pressing Mode until you reach the value you want to change.[2]
    • Whatever is flashing on your watch is the value you're changing.
    • People often skip over the day on accident. You can cycle through the 7 days of the week when the small abbreviation for the day is blinking. It’s easy to miss on some models!
    Advertisement
  3. 3
    Increase the number by pressing the St/Stp button. Locate the St/Stp button; it’s usually on the top right side of the watch. After you’ve selected the value you want to change with the Mode button, press St/Stp until you reach the correct number. If you need to reach an earlier time or day, keep pressing the button until it cycles through again.[3]
    • Check if you have the time set as AM or PM on your watch so all of the information is accurate.
    • On some models, like the WR330, the St/Stp button may be labeled Adj.
    • Refer to your manual to find out how you swap between 12- and 24-hour time modes. Typically, you press the Mode button repeatedly until you see the screen where you switch between formats and then select St/Stp to set the format.
  4. 4
    Press the Reset button in the top left when you're finished. After you've set all of the information correctly, press the Reset button to lock in all of the information. Check your watch over the course of the next day to make sure the time is correct.[4]
    • If there is a fourth button on your watch, it isn’t used to set the time or date. Usually, this button is labelled Light and it illuminates the backlight.
  5. Advertisement
Method 2
Method 2 of 2:

Analog Watches

  1. 1
    Pull out the crown on the side of the watch until it clicks once to set the date. The crown is the dial on either the left or right side of the watch face. Pinch the crown in between your fingers and pull it out until it clicks once. If you hear more than 1 click, push the crown back in and pull it out slowly.[5]
    • The crown on Armitron watches typically has two different positions. Pulling it one click adjusts the date, and pulling it 2 clicks adjusts the day of the week and time.
    • If your watch doesn't display the date, then the crown will only click once to set the time.
  2. 2
    Turn the crown until the correct date appears in the window. Rotate the crown clockwise or counterclockwise to move the date forward or back. Keep turning it until the correct date is in the window on your watch face. If you only needed to change the date, push the crown all the way in to set it.[6]
    • Avoid adjusting the date on your watch between 11 PM and 5 AM since that's when it advances to the next day.
  3. 3
    Pull the crown until it clicks a second time to adjust the day and time. If you have a watch that displays the day of the week, pull the crown until it clicks twice. If your watch doesn't have that display, simply pull the crown until it doesn't go any further.[7]
    • You can’t move the day or date without changing the time. You’ll need to spin the clock in 24-hour cycles.
  4. 4
    Rotate the crown until the day of the week is correct. Turn the crown clockwise or counterclockwise depending on the watch model you're using. Spin the hands for 2 full rotations around the watch face to move forward by 24 hours. Keep turning the crown until you reach the correct day of the week.[8]
  5. 5
    Adjust the time by rotating the crown. Once you have the day of the week and date set, turn the crown until the hands point at the correct time. Get as close as you can to the right time so your watch is accurate within a minute or two.[9]
    • The hands won't start moving on their own until you press the crown back in.
    • If your clock has a military time dial, make sure it's correct compared to the current time.
  6. 6
    Push the crown all the way in to lock your time and settings. Once you've made all of your adjustments, press the crown all the way in so it starts again. Check the watch periodically throughout the day to make sure it maintains the correct time.[10]
  7. Advertisement

Community Q&A

  • Question
    I have an Armitron 45/7041, a sports watch with red around it. The alarm goes off every 3-ish minutes. How do I stop it?
    Community Answer
    Community Answer
    Press mode until a1 a2 or a3 pops up then where it says CHRONO adj or set and fidget with it and it should work.
  • Question
    I have an Armitron Sports watch, black resin strap band with a silver plate ontop. The model says 45/7042. How do I change the hour format from 24 to 12?
    Community Answer
    Community Answer
    Go to setting the time and then hours. Change the hour time until you get to the time you want. It will cycle through Military time, then AM, then PM.
  • Question
    I need to reset the day; it says Thursday, but it's Friday. How can I do that?
    Community Answer
    Community Answer
    Press mode until it opens the time change, then press the right-side buttons. First minutes will be flashing; press again for hours, and then again to allow you to change day of the week.
Advertisement

About This Article

Eric McClure
Co-authored by:
wikiHow Staff Writer
This article was co-authored by wikiHow staff writer, Eric McClure. Eric McClure is an editing fellow at wikiHow where he has been editing, researching, and creating content since 2019. A former educator and poet, his work has appeared in Carcinogenic Poetry, Shot Glass Journal, Prairie Margins, and The Rusty Nail. His digital chapbook, The Internet, was also published in TL;DR Magazine. He was the winner of the Paul Carroll award for outstanding achievement in creative writing in 2014, and he was a featured reader at the Poetry Foundation’s Open Door Reading Series in 2015. Eric holds a BA in English from the University of Illinois at Chicago, and an MEd in secondary education from DePaul University. This article has been viewed 434,184 times.
How helpful is this?
Co-authors: 7
Updated: March 9, 2023
Views: 434,184
Categories: Watches
Article SummaryX

If you need to set an Armitron digital watch, start by holding the Set or Reset button until the watch beeps, which should take about 3 seconds. Once you hear the beep, you can use the Mode button on the bottom right side to cycle through the hour, minutes, day, and date displays. Keep pressing the Mode button until the value you need to change is highlighted, then increase the number by pressing the St/Stp button. When your watch is displaying the correct value, press the Reset button again to lock in all of your changes. For more help, like how to change the time and date on an analog Armitron watch, read on.

Did this summary help you?
Advertisement