Sugar soap has a sweet name and what you do with it is just as sweet: brightening up your walls! Sugar soap is a type of chemical cleaner usually used to wash walls before painting them, but also to refresh dingy-looking paint.[1] You can sugar soap and reveal your beautiful walls by applying the product and then thoroughly rinsing it off.

Part 1
Part 1 of 2:

Protecting Your Floors and Walls

  1. 1
    Place a drop sheet under the wall you’re cleaning. Get a plastic painter’s drop sheet at your local home or hardware store. Arrange it so that it covers the floor under any wall you plan to sugar soap. Using a drop sheet can ensure that the sugar soap and any water won’t ruin your floor.
  2. 2
    Move or cover furniture. Move any furniture near the wall to a place where no water or soap can splash it. If you can’t move it, place a plastic drop sheet over the furniture to protect it from any splashes or spills.[2]
    Advertisement
  3. 3
    Tape over electrical outlets. Using masking tape or blue painter’s tape, cover over any electrical outlets or sockets on the wall you’re cleaning. Be sure to cover over any electrical outlets on the baseboards that may also get splashed. This can minimize the risk that any splashed or running water doesn’t damage your outlets.[3]
  4. 4
    Dust the wall. Using a duster or small broom, wipe off your wall. Removing dust from the wall can make it easier to sugar soap your walls. It can also ensure that you don’t have any lingering dirty bits that won’t go away.
  5. 5
    Remove marks with a baking soda paste. Mix together a paste of equal parts baking soda and water. Apply the paste to any marks or stains you see on the wall with a clean cloth or your finger. Then rub away the stain or mark with a clean cloth until you can’t see it any longer.[4]
    • You can safely apply the baking soda paste to any paint color without it chipping or diluting the color.
  6. Advertisement
Part 2
Part 2 of 2:

Cleaning with the Sugar Soap

  1. 1
    Put on your protective gear. Before you start using the sugar soap, put on a pair of eye goggles, rubber gloves, and a protective facemask. Wearing protective gear can ensure you don’t get any sugar soap in your eyes or on your skin.[5]
  2. 2
    Dilute the sugar soap. Fill a clean spray bottle with warm water. Then, add the amount of sugar soap indicated on the packaging instructions. Stir until the sugar soap is dissolved.[6]
    • Add more sugar soap to the warm water to deep clean your walls.
  3. 3
    Spray the sugar soap mixture onto your wall. Starting at the top of your wall, mist a small section with the sugar soap mixture. Let the sugar soap sit for 30-60 seconds. Then, wipe it off with a clean cloth or sponge.[7] [8]
    • Leave the sugar soap on longer for areas that appear dirtier.[9]
  4. 4
    Work your way down the rest of the wall. Continue to spray small sections of your wall with sugar soap until you reach the bottom. Concentrate the spray on the middle of your wall, as this is often the dirtiest part. Sponge or wipe away the dirty sugar soap as you finish each section.
  5. 5
    Rinse the walls with a damp sponge. Fill a pail or container with clean, warm water. Dip a sponge into the bucket and wring out any excess water. Staring at the top of the wall, wipe off small sections of the water to rinse off any lingering sugar soap or dirt. Continue to rinse small sections of the wall until you reach the bottom.[10]
    • Rinse off the sponge in the bucket in between sections so you’re not spreading any dirt or grime.
  6. 6
    Dry the walls. Grab a clean and dry towel or microfiber cloth.[11] Gently wipe or dab your cleaned wall with the cloth. See if there are any dirty spots on the cloth and clean those places on the wall again with the sugar soap.
  7. Advertisement

Community Q&A

  • Question
    Do I buy or make sugar soap? Where or how?
    Community Answer
    Community Answer
    You buy sugar soap. Look in your general store near the other cleaning products, or purchase it online.
  • Question
    Can I use sugar soap on emulsion?
    Community Answer
    Community Answer
    Yes, you can do this, as long as you rinse it off with clean warm water and a sponge or cloth. Try a microfiber cloth for both washing the paintwork and rinsing the paintwork.
  • Question
    Do I need to do this on painted doors?
    Community Answer
    Community Answer
    You don't need to, but you certainly can if you'd like a clean door.
Advertisement

Things You’ll Need

  • Drop cloth
  • Sugar soap
  • Clean towel
  • Baking soda
  • Cleaning cloth
  • Sponge


  1. https://www.viphomeservices.com.au/blog/26/cleaning-your-walls-in-8-easy-steps/
  2. Daniel Olin. Home Cleaning Specialist. Expert Interview. 12 October 2021.

About This Article

Daniel Olin
Co-authored by:
Home Cleaning Specialist
This article was co-authored by Daniel Olin. Daniel Olin is a Home Cleaning Specialist and the CEO of Easyway Maid Service, a home-cleaning company based in Austin, Texas. With over four years of experience, Daniel and Easyway Maid Service specialize in executive-quality maid service, as well as vacation rental cleaning and overall home deep cleaning. Daniel holds a BA in Psychology from The University of California, Los Angeles. This article has been viewed 229,231 times.
1 votes - 100%
Co-authors: 6
Updated: September 22, 2022
Views: 229,231
Categories: Wallpaper
Article SummaryX

Sugar soap, which is sometimes called TSP, is a type of cleaner that you can use to clean walls before painting them, or to freshen up dingy walls that are already painted. Before using sugar soap, lay down drop cloths to protect your floor and furniture. Tape over any electrical outlets. Dust the walls to remove cobwebs and loose grime, and scrub away any stains with a mixture of equal parts baking soda and water. Wipe the paste away with a clean, damp cloth when you’re done. Put on protective goggles, rubber gloves, and a facemask before cleaning with sugar soap. Dilute the soap with warm water according to the package directions and pour the mixture into a spray bottle. Spray the mixture onto your walls in small sections, moving from top to bottom. Let the soap sit on the wall for 30-60 seconds before wiping it off with a clean, damp cloth or sponge. Go over the wall again with a sponge dipped in warm water to rinse away any remaining sugar soap and dirt. Wipe the walls dry with a soft towel or microfiber cloth. For tips on how to remove marks from your wall before applying sugar soap, keep reading!

Did this summary help you?
Advertisement