Narrow-gauge railroads in the United States

Standard gauge was favored for railway construction in the United States, although a fairly large narrow-gauge system developed in the Rocky Mountains of Colorado and Utah. Isolated narrow-gauge lines were built in many areas to minimize construction costs for industrial transport or resort access, and some of these lines offered common carrier service. Outside Colorado, these isolated lines evolved into regional narrow-gauge systems in Maine, New York, Pennsylvania, Ohio, Iowa, Hawaii, and Alaska.


Track gauge
By transport mode
By size (list)
Graphic list of track gauges

Minimum
  Minimum
  Fifteen inch 381 mm (15 in)

Narrow
 
  • 600 mm
  • 610 mm
  • 686 mm
  • (1 ft 11+58 in)
  • (2 ft)
  • (2 ft 3 in)
 
  • 750 mm
  • 760 mm
  • 762 mm
  • (2 ft 5+12 in)
  • (2 ft 5+1516 in)
  • (2 ft 6 in)
 
  • 891 mm
  • 900 mm
  • 914 mm
  • 950 mm
  • (2 ft 11+332 in)
  • (2 ft 11+716 in)
  • (3 ft)
  • (3 ft1+1332 in)
  Metre 1,000 mm (3 ft 3+38 in)
  Three foot six inch 1,067 mm (3 ft 6 in)
  Four foot 1,219 mm (4 ft 0 in)
  Four foot six inch 1,372 mm (4 ft 6 in)
  1432 mm 1,432 mm (4 ft 8+38 in)

  Standard 1,435 mm (4 ft 8+12 in)

Broad
 
  • 1,445 mm
  • 1,450 mm
  • (4 ft 8+78 in)
  • (4 ft 9+332 in)
  Leipzig gauge 1,458 mm (4 ft 9+1332 in)
  Toronto gauge 1,495 mm (4 ft 10+78 in)
 
  • 1,520 mm
  • 1,524 mm
  • (4 ft 11+2732 in)
  • (5 ft)
 
  • 1,581 mm
  • 1,588 mm
  • 1,600 mm
  • (5 ft 2+14 in)
  • (5 ft 2+12 in)
  • (5 ft 3 in)
  Baltimore gauge 1,638 mm (5 ft 4+12 in)
 
  • 1,668 mm
  • 1,676 mm
  • (5 ft 5+2132 in)
  • (5 ft 6 in)
  Six foot 1,829 mm (6 ft)
  Brunel 2,140 mm (7 ft 14 in)
Change of gauge
By location
World map, rail gauge by region

New England

The Maine Narrow Gauge Railroad in Portland, Maine

In New England, the first narrow-gauge common-carrier railroad was the Billerica and Bedford Railroad, which ran from North Billerica to Bedford in Middlesex County, Massachusetts from 1877 to 1878. There were extensive 2 ft (610 mm) gauge lines in the Maine forests early in the 20th century. In addition to hauling timber, agricultural products and slate, the Maine lines also offered passenger services. The Boston, Revere Beach & Lynn Railroad was a narrow-gauge commuter railroad that operated in Massachusetts, much of whose right-of-way is used for rapid transit today. Narrow gauges also operated in the mountains of New Hampshire, on the islands of Nantucket and Martha's Vineyard and in a variety of other locations. The still-operating Edaville Railroad tourist heritage railroad in southeastern Massachusetts is a two-foot narrow-gauge system.

Mid-Atlantic

East Broad Top's rare gas-electric railcar M-1

The last remaining 3 ft (914 mm) gauge common carrier east of the Rocky Mountains was the East Broad Top Railroad in central Pennsylvania. Running from 1873 until 1956, it supplied coal to brick kilns and general freight to the towns it passed through, connecting to the Pennsylvania Railroad at Mount Union, Pennsylvania. Purchased for scrap by the Kovalchick Corporation when it ended common carrier service in 1956, it reopened as a tourist railroad in 1960. Still owned by the Kovalchick family, trains operate over 5 miles (8.0 km) of the original 33-mile (53 km) mainline. This line is the oldest surviving stretch of narrow-gauge track in the United States.

It was the last remnant of an extensive narrow-gauge network in New York and Pennsylvania that included many interconnecting lines. The largest concentration was in the Big Level region around Bradford, Pennsylvania, from which lines radiated towards Pittsburgh and into New York state. This group also included the Tonawanda Valley & Cuba Railroad. Though the TV&C's narrow-gauge tracks are long gone, the standard-gauge Arcade and Attica Railroad continues to run over a portion of the TV&C's route. The Waynesburg and Washington Railroad, a subsidiary of the Pennsylvania Railroad, operated in the southwestern part of the state until 1933.

The Philadelphia and Atlantic City Railway and the Pleasantville & Ocean City Railroad were originally built to 3 ft 6 in (1,067 mm) gauge.

Southeast

The Southeast helped initiate the narrow-gauge era. The first in Georgia was the Kingsboro & Cataula Railway, chartered in 1870.[1] In Tennessee, the Duck River Valley Narrow Gauge Railway was also chartered in 1870, opening seven years later; it was converted to standard gauge in 1888. The first narrow-gauge railway in Alabama was the Tuskegee Railroad in 1871.

Longest lived of its narrow gauges was the East Tennessee and Western North Carolina Railroad. Originally built as a broad gauge in 1866, the line was later converted to a narrow-gauge railroad between Johnson City, Tennessee; Cranberry, North Carolina; and ultimately Boone, North Carolina. It continued in service until 1950.

Another long-lived southern narrow gauge was the Lawndale Railway and Industrial Co.

Midwest

One of the first three narrow gauges in the U.S. – the Painesville & Youngstown – opened in Ohio in 1871, and the narrow-gauge movement reached its greatest length in the Midwest. For a brief time in the 1880s it was possible to travel by narrow gauge from Lake Erie across the Mississippi River and into Texas. The hub of this system, Delphos, Ohio, shared with Durango, Colorado the distinction of being the only towns in the United States from which it was possible to travel by narrow gauge in all four compass directions.

The Chicago Tunnel Company operated a 60-mile (97 km) long underground 2 ft (610 mm) gauge freight railroad under the streets of the Chicago Loop. This common carrier railroad used electric traction, interchanged freight with all of the railroads serving Chicago, and offered direct connections to many loop businesses from 1906 to 1959.

Ohio was a center of the narrow-gauge movement. In addition to serving as the northern end of the Little Giant "transcontinental", it had several other notable lines, including the long-lived Ohio River & Western Railroad, the Kelley Island Lime & Transport Company (the world's largest operator of Shay locomotives, virtually all of them narrow gauge) and the Connotton Valley Railroad, a successful coal hauler still in operation today as the standard-gauge Wheeling & Lake Erie Railroad. Narrow gauge railroad mileage in Ohio reached its peak in 1883 and declined rapidly after 1884.[2]

Numerous 3 ft (914 mm) gauge common-carrier narrow-gauge lines were built in Iowa in the 19th century. The largest cluster of lines radiated from Des Moines, with the Des Moines, Osceola and Southern extending south to Cainsville, Missouri, the Des Moines North-Western extending northwest to Fonda and smaller lines extending north to Boone and Ames. These lines were all abandoned or regauged by 1900. The Burlington and Western and the Burlington and Northwestern system extended from Burlington to Washington, Iowa and the coal fields around Oskaloosa. This system was widened to standard gauge on June 29, 1902 and merged with the Chicago, Burlington and Quincy Railroad a year later. The Bellevue and Cascade, from Bellevue on the Mississippi to Cascade inland remained in service until abandonment in 1936. A caboose from the Bellevue and Cascade is the only surviving piece of Iowa narrow-gauge equipment. It currently operates on the Midwest Central Railroad in Mount Pleasant, a heritage railroad.

In 1882, thirty-two narrow-gauge logging railroads were constructed in Michigan, and by 1889 there were eighty-nine such logging railroads in operation, totaling almost 450 miles (720 km) of track.[3]

Mountain West

A steam locomotive of the C&TS RR

The Denver and Rio Grande Railroad, opened in 1871, was one of the first three narrow gauges in the United States and by far the longest and most significant. It effectively circled the state of Colorado, and feeder lines were run to the mining communities of Leadville, Aspen, Cripple Creek, Telluride and Silverton. Through affiliated companies, its lines extended west to Salt Lake City, Utah and south to Santa Fe, New Mexico. The northern trunk line was re-gauged early to standard, but the southern portions remained steam-hauled and narrow gauge until the 1960s.

Other major narrow-gauge railroads in Colorado included the Rio Grande Southern, the Denver, South Park and Pacific, the Colorado Central, and the Florence and Cripple Creek. The Uintah Railway operated in Utah and Colorado, and boasted the tightest curve (Moro Castle curve) on a US common carrier at Baxter Pass.[4]

In Utah, narrow-gauge railroads sprang up immediately after the completion of the Transcontinental Railroad on May 10, 1869. The Utah and Northern Railway connected the fertile Mormon Corridor with the mining camps near Butte, Montana with an extensive three-foot gauge system that lasted from 1871 until 1887.[5] Other narrow-gauge lines in Utah included the Wasatch & Jordan Valley (which hauled granite for the construction of the Salt Lake City Church of Jesus Christ of Latter Day Saint's temple) and the Utah & Pleasant Valley which tapped into the Pleasant Valley coal fields in north-central Utah. Both of these latter railroads eventually formed part of the Denver & Rio Grande Western System.

West Coast

Shay geared locomotive at the Roaring Camp and Big Trees Narrow Gauge Railroad

The Southern Pacific operated several 3 ft (914 mm) gauge railroads, including the Carson and Colorado Railway and the Nevada–California–Oregon Railway, running from Reno into southern Oregon. California's independent 3 ft (914 mm) lines included the Pacific Coast Railway serving the Santa Maria Valley, the North Pacific Coast Railroad and South Pacific Coast Railroads extending northward and southward from San Francisco Bay, and the surviving Disneyland Railroad.

The defunct Arcata and Mad River Railroad was 3 ft 9+12 in (1,156 mm) gauge

Two small regional railways in the Pacific Northwest were the Ilwaco Railway and Navigation Co near Astoria, and the Sumpter Valley Railway near Baker City, Oregon. The latter still operates in the summer.

The San Francisco cable car system is 3 ft 6 in (1,067 mm) gauge as was the now defunct Los Angeles Railway and the San Diego Electric Railway.

Alaska

Alaska is home to two surviving narrow gauge railroads. The last surviving commercial common carrier narrow-gauge railroad in the United States was the White Pass and Yukon Route connecting Skagway, Alaska and Whitehorse, Yukon Territory. It ended common carrier service in 1982, but has since been partially reopened as a tourist railway.

The Second is in the interior of Alaska, in Fairbanks. A narrow gauge railroad known as the Tanana Valley Railroad, was bought by the Alaska Railroad in 1930, when the transition of narrow gauge to standard gauge happened. Today, the Tanana Valley Railroad steam locomotive Engine No. 1 is still operated by the Friends of the Tanana Valley Railroad and housed in the Tanana Valley Railroad Museum which is open year-round. The steam locomotive is taken out and fired up during the summer on a scheduled basis.

Hawaii

Hawaii boasted an extensive network of not only narrow-gauge sugar-cane railways, but common carriers such as the Hawaii Consolidated Railway (which was standard gauge), Ahukini Terminal & Railway Company, Koolau Railway company, Kahului Railroad, and the Oahu Railway and Land Company. The Oahu Railway and Land Company was the largest narrow-gauge class-one common-carrier railway in the US (at the time of its dissolution in 1947), and the only US narrow-gauge railroad to use signals. The OR&L used Automatic Block Signals, or ABS on their double track mainline between Honolulu and Waipahu, a total of 12.9 miles (20.8 km), and had signals on a branch line for another nine miles (14 km). The section of track from Honolulu to Waipahu saw upwards of eighty trains a day, making it not only one of the busiest narrow-gauge main lines in the U.S, but one of the busiest mainlines in the world.

Other applications of narrow gauge in the U.S.

There were also numerous narrow-gauge logging railroads in Pennsylvania and West Virginia who operated mostly with geared locomotives such as Shays, Climaxes, and Heislers.

Many narrow-gauge lines were private carriers serving particular industries. One major industry that made extensive use of 3 ft (914 mm) gauge railroads was the logging industry, especially in the West. Although most of these lines closed by the 1950s, one notable later survivor was West Side Lumber Company railway which continued using 3 ft (914 mm) gauge geared steam locomotives until 1968.

There is one narrow-gauge industrial railroad still in commercial operation in the United States, the US Gypsum operation in Plaster City, California, which uses a number of Montreal Locomotive Works locomotives obtained from the White Pass after its 1982 closure. Temporary narrow-gauge railways are commonly built to support large tunneling and mining operations.

The famous San Francisco cable car system has a gauge of 3 ft 6 in (1,067 mm), as did the street cars on the former Los Angeles street railway.

Rail haulage has been very important in the mining industry. By 1922, 80 percent of all new coal mines in the United States were being developed using 3 ft 6 in (1,067 mm) (42 inch) gauge trackage, and the American Mining Congress recommended this as a standard gauge for coal mines, using a 42-inch (1,067 mm) wheelbase and automatic couplers centered 10 inches (254 mm) above the rail.[6]

The Washington Metro system in the Washington, D.C. metropolitan area has a gauge of 4 ft 8+14 in (1,429 mm), which is 1/4" or 6mm closer than standard gauge.

U.S. common-carrier narrow gauges in the twentieth century

Thousands of narrow-gauge railroads were built or projected in the U.S. The following list includes those common-carrier narrow-gauge railroads which operated into the twentieth century. Note: this list intentionally excludes tourist railroads, amusement parks, loggers, and other non-common carriers.

List of narrow-gauge railroads in the United States
(all 3 ft / 914 mm gauge unless stated)
RailroadStateStart
year
End
year
Notes
Arcata and Mad River RailroadCalifornia185419833 ft 9+12 in (1,156 mm) gauge, converted to 4 ft 8+12 in (1,435 mm) standard gauge
Altoona and Beech Creek RailroadPennsylvania18911916[7] converted to standard gauge
Anniston and Atlantic RailroadAlabama18841890[8] converted to standard gauge
Arizona and New Mexico RailwayArizona, New Mexico18831901[9] converted to standard gauge
Arizona Narrow Gauge Railroad, later Tucson, Globe and Northwestern RailroadArizona18861894[10]
Arkansas Central Railway, later Arkansas Midland RailroadArkansas18721887[11] 3 ft 6 in (1,067 mm) gauge until 1883, converted to standard gauge
Batesville and Brinkley RailroadArkansas18821888[12] converted to standard gauge
Bellevue and Cascade RailroadIowa18801936[13]
Bingham Canyon & Camp FloydUtah18721881Sold to D&RG in 1881, standard gauged 1883
Boston, Revere Beach and Lynn RailroadMassachusetts18751940[14]
Bradford, Bordell and Kinzua Railroad, later Buffalo, Bradford and Kane RailroadPennsylvania18801906[15]
Bridgton and Saco River Railroad, later Bridgton and Harrison RailwayMaine18831941[16] 2 ft (610 mm) gauge
Carson and Colorado Railroad, later Carson and Colorado Railway, then Nevada and California Railway, then Southern PacificCalifornia, Nevada18811960[17] part conversion to standard gauge
Catskill and Tannersville RailwayNew York18991918[18]
Catskill Mountain Railroad, later Catskill Mountain RailwayNew York18821918[18]
Cincinnati, Georgetown and Portsmouth Railroad Ohio 1877 1902 [19] converted to standard gauge, later abandoned. Date of conversion listed.
Colorado Central Railroad, later Colorado and Southern RailwayColorado18721941[20]
Colorado and Southern RailwayColorado18981943Formed from Colorado Central Railroad and the Denver, South Park and Pacific Railway
Coronado RailroadArizona18791932[21] 20 in (508 mm) gauge, later 3 ft (914 mm) gauge
Cotton Plant RailroadArkansas18791882[12] 3 ft 6 in (1,067 mm) gauge until 1881, to Batesville and Brinkley Railroad
Crescent TramwayUtah18831900[22] 2 ft 6 in (762 mm) gauge
Denver and Rio Grande Western RailwayColorado, Utah, New Mexico18711969[23] Utah portion standard gauged 1883
Durango and Silverton Narrow Gauge RailroadColorado1881Still operating
Eagles Mere RailroadPennsylvania18921928[24]
East and West Railroad of AlabamaAlabama, Georgia18711890[25] converted to standard gauge
East Broad Top Railroad and Coal CompanyPennsylvania18731956[26]
East Tennessee and Western North Carolina RailroadTennessee, North Carolina18811950[27]
Eureka and Palisade RailroadNevada18741938[28]
Farmville and Powhatan Railroad, later Tidewater and Western RailroadVirginia18821917[29]
Florence and Cripple Creek RailroadColorado18941915[30]
Franklin and Megantic Railroad, later Sandy River and Rangeley Lakes RailroadMaine18841908[31] 2 ft (610 mm) gauge
Fulton County Narrow Gauge RailwayIllinois18801905[32] converted to standard gauge
Golovin Bay RailroadAlaska19021906[33]
Hot Springs Branch RailroadArkansas18751889[12] converted to standard gauge
Kane and Elk RailroadPennsylvania18961911[34]
Kennebec Central RailroadMaine18901929[35] 2 ft (610 mm) gauge
Lancaster, Oxford and Southern RailroadPennsylvania18731919[36]
Lawndale Railway and Industrial CompanyNorth Carolina18991945[37]
Lewisburg and Buffalo Valley RailroadPennsylvania18971906[38]
Linville River RailwayNorth Carolina18991913[27] sold to East Tennessee and Western North Carolina Railroad
Little Cottonwood Transportation CompanyUtah19101925[22]
Magma Arizona RailroadArizona19141923[39] converted to standard gauge
Maryland Central Railroad, later Baltimore and Lehigh RailroadMaryland, Pennsylvania18821900[40] converted to standard gauge; became Maryland and Pennsylvania Railroad
Monson RailroadMaine18831943[41] 2 ft (610 mm) gauge
Montgomery Southern RailwayAlabama18821889[42] converted to standard gauge
Montrose RailwayPennsylvania18721903[38] converted to standard gauge
Morenci Southern RailwayArizona18991932[43]
Mount Gretna Narrow Gauge RailwayPennsylvania18891915[44] 2 ft (610 mm) gauge
Nantucket RailroadMassachusetts18811917[45]
Nevada and Oregon Railroad, later Nevada and California Railroad, then Nevada-California-Oregon Railway, then Southern PacificNevada, California, Oregon18821929[46] converted to standard gauge
Nevada Central RailwayNevada18801938[47]
Nevada County Narrow Gauge RailroadCalifornia18761942[48]
Nevada Short Line RailwayNevada19131918[49]
New Berlin and Winfield RailroadPennsylvania19051916[50]
Newport and Shermans Valley RailroadPennsylvania18911934[51]
North Pacific Coast Railroad, later Northwestern Pacific RailroadCalifornia18731930[52]
Oahu Railway and Land CompanyHawaii18891947[53]
Ohio River and Western RailwayOhio18771931[54]
Oregonian RailwayOregon18781893[55] to Southern Pacific; converted to standard gauge
Otis Elevating Railway, later Otis RailwayNew York18921918[18] Funicular railway
Pacific Coast RailwayCalifornia18731941[56]
Pajaro Valley Consolidated RailroadCalifornia18901929[57]
Phillips and Rangeley Railroad, later Sandy River and Rangeley Lakes RailroadMaine18901908[58] 2 ft (610 mm) gauge
Pioche Pacific Transportation CompanyNevada18911948[59]
Pittsburgh and Castle Shannon RailroadPennsylvania18711909[60] 3 ft 4 in (1,016 mm) gauge
Pittsburgh and Western RailroadPennsylvania18781911[61]
Potomac, Fredericksburg and Piedmont RailroadVirginia18761926[62]
Rio Grande Southern RailroadColorado18921951[63]
Sandy River Railroad, later Sandy River and Rangeley Lakes RailroadMaine18791908[64] 2 ft (610 mm) gauge
Sandy River and Rangeley Lakes RailroadMaine19081935[65] 2 ft (610 mm) gauge, portion operating as a heritage railroad.
Shannon-Arizona RailwayArizona19101932[66]
South Pacific Coast RailroadCalifornia18781940[67]
Sumpter Valley RailwayOregon18911947[68]
Susquehanna and Eagles Mere RailroadPennsylvania19021917[69]
Talladega and Coosa Valley RailroadAlabama18841889[42] converted to standard gauge
Tanana Valley RailroadAlaska19041930[70]
Tionesta Valley RailroadPennsylvania18821941[71]
Seaboard Railway of Alabama, later Tombigbee and Northern RailwayAlabama18911904[42] converted to standard gauge
Tonawanda Valley & Cuba RailroadNew York18811894Converted in 1896, Operates as A&A R.R. today
Tonopah RailroadNevada19041905[72] converted to standard gauge
Tuscarora Valley RailroadPennsylvania18931934[73]
Tuskegee RailroadAlabama18711963[74]
Uintah RailwayColorado, Utah19041939[75]
United Verde and Pacific RailwayArizona18941920[76]
Utah & Pleasant ValleyUtah18751881[22]
Wasatch & Jordan ValleyUtah18721879[22] Merged with Bingham Canyon & Camp Floyd, standard gauged 1883
Waynesburg and Washington RailroadPennsylvania18771944[77] converted to standard gauge
White Pass & Yukon RouteAlaska1898Still operating -

tourism only

[78][79]
Wild Goose Railroad, later Nome Arctic Railroad, then Seward Peninsula RailroadAlaska19001955[80]
Wiscasset and Quebec Railroad, later Wiscasset, Waterville and Farmington RailwayMaine18951933[81] 2 ft (610 mm) gauge, portion operating as a heritage railroad

Narrow-gauge railroad displays

Some cars and trains from the Maine two-footers are now on display at the Maine Narrow Gauge Railroad Museum in Portland, Maine.

In 1957, the East Tennessee and Western North Carolina Railroad was revived as a tourist attraction under the common name, Tweetsie Railroad. It currently runs a three-mile (5 km) route near Blowing Rock, North Carolina. Similarly, the East Broad Top Railroad was revived in 1960 and runs on three miles of original 1873 trackage.

Significant remnants of the Colorado system remain as tourist attractions which run in the summer, including the Cumbres and Toltec Scenic Railroad running between Antonito, CO in the San Luis Valley and Chama, NM, and the Durango and Silverton Narrow Gauge Railroad running between its namesake towns of Durango and Silverton in the San Juan Mountains. Another line is the Georgetown Loop Railroad between Georgetown, Colorado and Silver Plume, Colorado in central Colorado. Much equipment from the Colorado narrow gauges is on display at the Colorado Railroad Museum in Golden, Colorado. Many pieces of the D&RGW's narrow-gauge equipment were sold off to various other companies upon its abandonment; the Ghost Town & Calico Railroad, a heritage railroad at Knott's Berry Farm in California, operates passenger service daily with two Class C-19 Consolidation (2-8-0) locomotives hauling preserved coaches along with a famed Galloping Goose RGS #3. D&RGW 223, a C-16 steam locomotive, is undergoing restoration at the Utah State Railroad Museum in Ogden, Utah.[22]

Much of the equipment from the Westside Lumber Co. found its way to tourist lines, including the Roaring Camp & Big Trees Narrow Gauge Railroad and Yosemite Mountain Sugar Pine Railroad in California and the Midwest Central Railroad in Iowa. Additional equipment from the west coast narrow gauges is displayed at the Nevada County Narrow Gauge RR Museum, in Nevada City, CA, Laws Depot Museum, and at the Grizzly Flats Railroad (donated to Southern California Railway Museum after Ward Kimball's death) along with a Westside Lumber caboose.

The Huckleberry Railroad in Flint, Michigan began operating in 1976 using a part of an old Flint & Pere Marquette Railroad branch line. The Flint & Pere Marquette Railroad extended the branch line from Flint to Otter Lake in the late 1800s. It later came to be known as the Otter Lake Branch. Eventually the track was extended by another 4.5 miles from Otter Lake to Fostoria, for a total of 19.5 miles from Flint to Fostoria. The Pere Marquette Railway abandoned the Flint to Fostoria branch line in 1932. The Huckleberry Railroad began operations in 1976 on the remaining section of the Flint to Fostoria line when the Genesee County Parks and Recreation Commission purchased the line and opened Crossroads Village & Huckleberry Railroad as a historical tourist attraction.

Meanwhile, in Hawaii, the Hawaiian Railway Society on the island of Oahu operates on 6 miles of remaining Oahu Railway and Land Company trackage, from the yard in Ewa to Nanakuli. More tracks remain past a burned down bridge, and past the society in Ewa, totaling to 12 miles of remaining OR&L Right of way. On Maui, the Lahaina, Kaanapali and Pacific Railroad operates on 6 miles of tracks through former sugar plantation land. This railroad, also known as the "Sugar Cane Train" is the only 3 foot railroad in Hawaii to operate steam locomotives. On Kauai, two narrow-gauge railroads still operate. The 3 foot railroad, the Kauai Plantation Railway operates on a 3-mile loop through the Kilohana Estate and Plantation. The second narrow-gauge railroad on Kauai is a 30-inch railway, the Grove Farm Sugar Plantation Museum. They operate many different locomotives, from steam to diesel, on a mile loop through parts of the former Lihue Plantation.

See also

Notes

  1. Seibert, David. "Kingsboro & Cataula". GeorgiaInfo: an Online Georgia Almanac. Digital Library of Georgia. Retrieved 1 December 2016.
  2. Various editions of the Annual Report of the Commissioner of Railroads and TeIegraphs to the Governor of the State of Ohio. State of Ohio.
  3. Maybee 1976, p. 41
  4. Walker 1995, p. 9
  5. Carr, Stephen L. (1989). Utah Ghost Rails. Salt Lake City Utah: Western Epics. pp. 19–20. ISBN 0-914740-34-2.
  6. Stoek, Fleming & Hoskin 1922, pp. 103–103
  7. Hilton 1990, p. 484
  8. Hilton 1990, p. 302
  9. Hilton 1990, pp. 309–310
  10. Hilton 1990, p. 310
  11. Hilton 1990, pp. 313–314
  12. Hilton p. 314
  13. Hilton 1990, p. 394
  14. Hilton 1990, pp. 416–418
  15. Hilton 1990, pp. 507–508
  16. Hilton 1990, p. 407
  17. Hilton 1990, pp. 438–440
  18. Hilton 1990, pp. 452–453
  19. Various Annual Reports of the Commissioner of Railroads and Telegraphs to the Governor of the State of Ohio, esp. for the Years 1877, 1901 and 1902. Google books, HathiTrust: State of Ohio.
  20. Hilton 1990, pp. 340–342
  21. Hilton 1990, p. 311
  22. Strack, Don. "Utah Railroads". Retrieved 13 April 2011.
  23. Hilton 1990, pp. 344–353
  24. Hilton 1990, p. 486
  25. Hilton 1990, p. 302–304
  26. Hilton 1990, pp. 486–488
  27. Hilton 1990, pp. 516–519
  28. Hilton 1990, pp. 441–442
  29. Hilton 1990, p. 543
  30. Hilton 1990, pp. 358–359
  31. Hilton 1990, pp. 410–411
  32. Hilton 1990, pp. 387–389
  33. Hilton 1990, p. 305
  34. Hilton 1990, p. 488
  35. Hilton 1990, p. 409
  36. Hilton 1990, pp. 488–490
  37. Hilton 1990, pp. 459–461
  38. Hilton 1990, p. 490
  39. Hilton 1990, pp. 311–312
  40. Hilton 1990, pp. 414–416
  41. Hilton 1990, pp. 409–410
  42. Hilton 1990, p. 304
  43. Hilton 1990, p. 312
  44. Hilton 1990, pp. 490–492
  45. Hilton 1990, pp. 419–420
  46. Hilton 1990, pp. 326–328
  47. Hilton 1990, pp. 442–443
  48. Hilton 1990, pp. 328–329
  49. Hilton 1990, p. 443
  50. Hilton 1990, p. 492
  51. Hilton 1990, pp. 492–493
  52. Hilton 1990, pp. 329–330
  53. Hilton 1990, pp. 380–381
  54. Hilton 1990, pp. 470–471
  55. Hilton 1990, pp. 480–481
  56. Westcott & Johnson 1998
  57. Hilton 1990, pp. 332–333
  58. Hilton 1990, p. 411
  59. Hilton 1990, pp. 443–444
  60. Hilton 1990, pp. 493–494
  61. Hilton 1990, pp. 494–497
  62. Hilton 1990, pp. 5–5
  63. Hilton 1990, pp. 360–362
  64. Hilton 1990, p. 410
  65. Hilton 1990, pp. 410–413
  66. Hilton 1990, pp. 312–313
  67. Hilton 1990, pp. 335–337
  68. Hilton 1990, pp. 481–483
  69. Hilton 1990, p. 499
  70. Hilton 1990, p. 306
  71. Hilton 1990, pp. 499–501
  72. Hilton 1990, p. 444
  73. Hilton 1990, pp. 501–502
  74. Hilton 1990, pp. 304–305
  75. Hilton 1990, pp. 363–366
  76. Hilton 1990, p. 313
  77. Hilton 1990, pp. 502–503
  78. Hilton 1990, pp. 306–309
  79. "White Pass & Yukon Route Railway | Scenic Railway of the World". wpyr.com. Retrieved 2018-04-27.
  80. Hilton 1990, pp. 305–306
  81. Hilton 1990, pp. 413–414

References

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.