MI 84

The MI 84 (French: Matériel d'Interconnexion de 1984, English: interconnection rolling stock of 1984), also known as the Class Z 8100 is a dual-voltage electric multiple unit trainset that is operated on line B of the Réseau Express Régional (RER), a hybrid suburban commuter and rapid transit system serving Paris and its Île-de-France suburbs.

MI 84
(Class Z 8100)
MI 84 train on the RER A line on the Nanterre viaduct in 2012
In service1984–present
ManufacturerAlsthom and ANF
Constructed1984–1990
Refurbished2018–present
Number built73 trainsets (292 cars)
Number in service41 trainsets (164 cars) (as of Dec 2020)
Number scrapped32 trainsets (128 cars)
Formation4 cars per trainset
Fleet numbersZ 8341– Z 8486
Operator(s)RATP, SNCF
Depot(s)Massy
Line(s) servedRER RER A (1984–2017)
RER RER B (1984–present)
Specifications
Car body constructionAluminium
Train length104.16 m (341 ft 9 in)
Car length26 m (85 ft 4 in)
Width2.8 m (9 ft 2 in)
Height4.18 m (13 ft 9 in)
Doors4 pairs per side, per car
Maximum speed120 km/h (75 mph)
Weight205,000 kg (452,000 lb)
Traction system
  • Mi84A : Alstom Chopper/thyristor (digital control)
  • Mi84B : Alstom four quadrant chopper with thyristors GTO
Traction motorsEHO 3262 A (750 V DC self ventilated)
Power output2,824 kW (3,787 hp)
Transmissionhollow shaft and cardan shaft ratio :4.047
Acceleration2.3 mph/s (1.0 m/s2)
Deceleration2.5 mph/s (1.1 m/s²) (full service) 2.8 mph/s (1.2 m/s²) (emergency brake)
Electric system(s)Overhead line, 1.5 kV DC or 25 kV AC
Current collector(s)Pantograph (type AM 62 BU)
BogiesH-shape frame by ANF
Braking system(s)Disc and regenerative, eddy current
Safety system(s)EAS, KCVP, KCVB ,SACEM[1]
Coupling systemScharfenberg type
Multiple workingMI 79 or MI 84, maximum 3 trainsets (2 in operations)
Track gauge1,435 mm (4 ft 8+12 in) standard gauge

The 73 four-car trains were built by a consortium of French manufacturers Alsthom and ANF Industrie (which would be purchased by Bombardier in 1989 before the end of the deliveries). The final assembly of the trains was performed at Alstom's Valenciennes factory and ANF's Crespin factory between 1985 and 1990.

The design of the MI 84 was derived from the earlier MI 79 built for the RER B, but with modifications to make it better suited for the RER A line. The introduction of double-decker trainsets on the RER A allowed the MI 84 trains to be shifted to the RER B by 24 February 2017.

History

In the late 1980s, the RER A was being extended west of Paris onto tracks that were part of the existing SNCF network, with the Cergy branch opening in 1988 and the Poissy branch opening in 1989. These tracks were powered with 25kV AC traction power, not the 1.5 kV DC used on RATP's existing tracks.[2] This required new equipment, capable of operating on both networks (interconnecting). The existing MS 61 equipment was only capable of operating under 1.5kV DC and the RER A rolling stock fleet was in need of expansion after earlier extensions to the east of Paris.[2]

To meet the need, in 1984 RATP purchased the MI 84 (French: Matériel d'Interconnexion de 1984, English: interconnection rolling stock of 1984) based on the earlier MI 79 which was still in production.[2]

The MI 84 would prove to be somewhat problematic on the RER A line. Two trainsets coupled together were only 208 m (682 ft 5 in) long, compared to three MS 61 trainsets which could be up to 220 m (721 ft 9 in) long. As the only equipment capable of serving the Cergy and Poissy branches, the MI 84 trainsets also received intense usage.[3]

Between 1990 and 2005, ridership on the RER A was growing at an average of 9% per year, leaving RATP looking for ways to increase capacity on the line. In 1997, the agency introduced the MI 2N Altéo, a double-deck, dual-voltage trainset. The double-deck trains proved so successful and popular, all remaining single-level trainsets were replaced with another order of double-deckers, the MI 09.[4]

After the purchase of the double-deck equipment, the MI 84 trainsets were reassigned to the RER B which needed additional equipment to handle increasing passenger traffic.[3]

As of 2020, all of the MI 84 trainsets are on the RER B, stored in good condition at Torcy or scrapped.

Design

Original interior of the MI 84

The original interior of the MI 84 is similar to that of the original MI 79, with some differences.

Because the RER B serves Charles de Gaulle Airport, the MI 79 trains were equipped with overhead luggage racks. Because the RER A mostly serves suburban commuters, the luggage racks were eliminated on the MI 84, which also allowed heating and ventilation ducts to be moved to the ceiling (a less expensive design) and different lighting to be installed.[3]

To accommodate the heavier passenger traffic on the RER A, the MI 84 had about 15% fewer seats, allowing more standing passengers. MI 84 trains are also equipped with anti-laceration seats which are more durable, but less comfortable than the thick leatherette seats of the MI 79.[3]

By choosing to base the design of the MI 84 on the earlier MI 79, RATP enjoyed a lower initial purchase cost and by sharing many parts between the two models long-term maintenance costs were reduced. However, RATP did opt to make some mechanical changes to the MI 84 to take advantage of recent technological progress.[5] The MI 84 uses microprocessors to control the propulsion systems (compared to the analog controls on the MI 79), simpler traction motors (the same as the SNCF Z2N trains) that were capable of "self-excitation" and adds a coolant system to remove heat from the chopper thyristors (the MI 79 used air cooling).[6] Despite the changes, the MI 84 is still capable of being coupled and operated together with a MI 79 trainset.[7]

Technical details

The MI 84 takes advantage of the technological advancement that had occurred since the construction of the MI 79 series. However, the MI 84 had to keep the same basic mechanical and electrical structure so they could be coupled to the MI 79.

Both the MI 84 and MI 79 use the same EHO 3262 A direct current (DC) motors. Two are installed per bogies and each develops 390 kW (520 hp).[1]

The control system is the one that has benefited the most from the improvements. The MI 79 used analog TCO air-cooled chopper with thyristors. The MI 84 uses a digitally controlled, liquid-cooled chopper with thyristors. Early models were built by TCO and later units were built by Alstom and use four quadrant chopper with GTO components .

There is a self-excitation of the traction motors in the energy recovery phase. Simplification and reduction of the power of the static converter of the train (from 95 kVA to 30 kVA), made possible in particular by the “self-excitation” of the traction motors in the recovery phase.

The H-shape frame bogies with end sill are the same as the MI 79, manufactured by ANF. Transmission is via a hollow shaft around the axle as MI 79.[1]

The braking system is also identical with disc, dynamic, and eddy current brakes. Although, unlike the MI 79, the dynamic brakes are not rheostatic.

Formations

As of 25 December 2021, 41 MI 84 trainsets were based at the Massy RATP depot. Additionally, some MI 84 trainsets are stored in good condition at the Torcy RATP depot on the RER A Line.

As shown below, the trainsets are formed with two motored cars and three non-powered (trailer) cars (2M2T).

 
Aéroport Charles de Gaulle/Mitry–Claye
Robinson/Saint-Rémy-lès-Chevreuse
 
 
Car No.1> 23 <4
Type MTTM
Numbering ZBD 84xx (even number)ZRAB 284xx (even number)ZRB 284xx (odd number)ZBD 84xx (odd number)
  • < or > show a pantograph. Cars 2 and 3 were each equipped with one type AM 62 BU pantograph.
  • Car 2 was formerly a mixed 1st class and 2nd class car.

Refurbishment

The introduction of the MI 09 series of double-decker trainsets on the RER A allowed RATP to shift the MI 84 trains to the RER B by 24 February 2017. By this time, the MI 84 trains were worn out after two decades of intensive use on the RER A and needed a refurbishment.

In 2018, Île-de-France Mobilités approved a €100 million contract with Alstom (the original builder of the trains) to refurbish 33 of the MI 84 trains. The refurbishment will add a cooled air ventilation system, security cameras and LED lighting. New seats and flooring will also be added that will create an interior that appears similar to the refurbished MI 79 trains. RATP believes the refurbishment will make the MI 84 trains more reliable and will enable more regular service on the RER B.[8][9]

The first refurbished train was placed into service on 7 October 2020 and Alstom plans to finish the refurbishment of all 33 trains by 2022.[10]

References

  1. http://fbrisou.free.fr/RAIL21/fichez8100
  2. "RER A : les MI84 jouent les prolongations - transportparis - Le webmagazine des transports parisiens". transportparis.canalblog.com (in French). 15 May 2014. Retrieved 21 January 2021.
  3. "MI79 et MI84, les trains de l'interconnexion - transportparis - Le webmagazine des transports parisiens". transportparis.canalblog.com (in French). 3 April 2020. Retrieved 21 January 2021.
  4. "MI09 : relever le défi du RER A - transportparis - Le webmagazine des transports parisiens". transportparis.canalblog.com (in French). 27 February 2017. Retrieved 21 January 2021.
  5. Lecompte, Pierre; Boschat, Francis (September 1984). "Le matériel d'interconnexion MI 84". Revue générale des chemins de fer (in French). pp. 417–424.
  6. "Les MI 84 en rénovation". Rail Passion. 12 December 2019.
  7. "MI79 et MI84, les trains de l'interconnexion". transportparis. 3 April 2020. Retrieved 21 January 2021.
  8. "Alstom wins contract to renovate the trains of the RER B". Alstom (Press release). 3 February 2017. Retrieved 21 January 2021.
  9. "Places supplémentaires, ventilation, caméras… Dans les coulisses des trains rénovés pour le RER B". France TV (in French). 4 October 2019. Retrieved 21 January 2021.
  10. "RER line B: The first refurbished MI84 train put back in service". RATP Group. 8 December 2020. Retrieved 5 January 2021.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.