Rendering (computer graphics)

Rendering of the European Extremely Large Telescope.

A high-level representation of an image necessarily contains elements in a different domain from pixels. These elements are referred to as primitives. In a schematic drawing, for instance, line segments and curves might be primitives. In a graphical user interface, windows and buttons might be the primitives. In rendering of 3D models, triangles and polygons in space might be primitives.

If a pixel-by-pixel (image order) approach to rendering is impractical or too slow for some task, then a primitive-by-primitive (object order) approach to rendering may prove useful. Here, one loop through each of the primitives, determines which pixels in the image it affects, and modifies those pixels accordingly. This is called rasterization, and is the rendering method used by all current graphics cards.

Rasterization is frequently faster than pixel-by-pixel rendering. First, large areas of the image may be empty of primitives; rasterization will ignore these areas, but pixel-by-pixel rendering must pass through them. Second, rasterization can improve cache coherency and reduce redundant work by taking advantage of the fact that the pixels occupied by a single primitive tend to be contiguous in the image. For these reasons, rasterization is usually the approach of choice when interactive rendering is required; however, the pixel-by-pixel approach can often produce higher-quality images and is more versatile because it does not depend on as many assumptions about the image as rasterization.

The older form of rasterization is characterized by rendering an entire face (primitive) as a single color. Alternatively, rasterization can be done in a more complicated manner by first rendering the vertices of a face and then rendering the pixels of that face as a blending of the vertex colors. This version of rasterization has overtaken the old method as it allows the graphics to flow without complicated textures (a rasterized image when used face by face tends to have a very block-like effect if not covered in complex textures; the faces are not smooth because there is no gradual color change from one primitive to the next). This newer method of rasterization utilizes the graphics card's more taxing shading functions and still achieves better performance because the simpler textures stored in memory use less space. Sometimes designers will use one rasterization method on some faces and the other method on others based on the angle at which that face meets other joined faces, thus increasing speed and not hurting the overall effect.

In ray casting the geometry which has been modeled is parsed pixel by pixel, line by line, from the point of view outward, as if casting rays out from the point of view. Where an object is intersected, the color value at the point may be evaluated using several methods. In the simplest, the color value of the object at the point of intersection becomes the value of that pixel. The color may be determined from a texture-map. A more sophisticated method is to modify the color value by an illumination factor, but without calculating the relationship to a simulated light source. To reduce artifacts, a number of rays in slightly different directions may be averaged.

Ray casting involves calculating the "view direction" (from camera position), and incrementally following along that "ray cast" through "solid 3d objects" in the scene, while accumulating the resulting value from each point in 3D space. This is related and similar to "ray tracing" except that the raycast is usually not "bounced" off surfaces (where the "ray tracing" indicates that it is tracing out the lights path including bounces). "Ray casting" implies that the light ray is following a straight path (which may include traveling through semi-transparent objects). The ray cast is a vector that can originate from the camera or from the scene endpoint ("back to front", or "front to back"). Sometimes the final light value is derived from a "transfer function" and sometimes it's used directly.

Rough simulations of optical properties may be additionally employed: a simple calculation of the ray from the object to the point of view is made. Another calculation is made of the angle of incidence of light rays from the light source(s), and from these as well as the specified intensities of the light sources, the value of the pixel is calculated. Another simulation uses illumination plotted from a radiosity algorithm, or a combination of these two.

Spiral Sphere and Julia, Detail, a computer-generated image created by visual artist Robert W. McGregor using only POV-Ray 3.6 and its built-in scene description language.

Ray tracing aims to simulate the natural flow of light, interpreted as particles. Often, ray tracing methods are utilized to approximate the solution to the rendering equation by applying Monte Carlo methods to it. Some of the most used methods are path tracing, bidirectional path tracing, or Metropolis light transport, but also semi realistic methods are in use, like Whitted Style Ray Tracing, or hybrids. While most implementations let light propagate on straight lines, applications exist to simulate relativistic spacetime effects.[1]

In a final, production quality rendering of a ray traced work, multiple rays are generally shot for each pixel, and traced not just to the first object of intersection, but rather, through a number of sequential 'bounces', using the known laws of optics such as "angle of incidence equals angle of reflection" and more advanced laws that deal with refraction and surface roughness.

Once the ray either encounters a light source, or more probably once a set limiting number of bounces has been evaluated, then the surface illumination at that final point is evaluated using techniques described above, and the changes along the way through the various bounces evaluated to estimate a value observed at the point of view. This is all repeated for each sample, for each pixel.

In distribution ray tracing, at each point of intersection, multiple rays may be spawned. In path tracing, however, only a single ray or none is fired at each intersection, utilizing the statistical nature of Monte Carlo experiments.

As a brute-force method, ray tracing has been too slow to consider for real-time, and until recently too slow even to consider for short films of any degree of quality, although it has been used for special effects sequences, and in advertising, where a short portion of high quality (perhaps even photorealistic) footage is required.

However, efforts at optimizing to reduce the number of calculations needed in portions of a work where detail is not high or does not depend on ray tracing features have led to a realistic possibility of wider use of ray tracing. There is now some hardware accelerated ray tracing equipment, at least in prototype phase, and some game demos which show use of real-time software or hardware ray tracing.

Neural rendering is a rendering method using artificial neural networks.[2][3] Neural rendering includes image-based rendering methods that are used to reconstruct 3D models from 2-dimensional images.[2]

This is the key academic/theoretical concept in rendering. It serves as the most abstract formal expression of the non-perceptual aspect of rendering. All more complete algorithms can be seen as solutions to particular formulations of this equation.

${\displaystyle L_{o}(x,{\vec {w}})=L_{e}(x,{\vec {w}})+\int _{\Omega }f_{r}(x,{\vec {w}}',{\vec {w}})L_{i}(x,{\vec {w}}')({\vec {w}}'\cdot {\vec {n}})\mathrm {d} {\vec {w}}'}$

Meaning: at a particular position and direction, the outgoing light (L_o) is the sum of the emitted light (L_e) and the reflected light. The reflected light being the sum of the incoming light (L_i) from all directions, multiplied by the surface reflection and incoming angle. By connecting outward light to inward light, via an interaction point, this equation stands for the whole 'light transport' – all the movement of light – in a scene.

The bidirectional reflectance distribution function (BRDF) expresses a simple model of light interaction with a surface as follows:

${\displaystyle f_{r}(x,{\vec {w}}',{\vec {w}})={\frac {\mathrm {d} L_{r}(x,{\vec {w}})}{L_{i}(x,{\vec {w}}')({\vec {w}}'\cdot {\vec {n}})\mathrm {d} {\vec {w}}'}}}$

Light interaction is often approximated by the even simpler models: diffuse reflection and specular reflection, although both can ALSO be BRDFs.

Rendering is practically exclusively concerned with the particle aspect of light physics – known as geometrical optics. Treating light, at its basic level, as particles bouncing around is a simplification, but appropriate: the wave aspects of light are negligible in most scenes, and are significantly more difficult to simulate. Notable wave aspect phenomena include diffraction (as seen in the colours of CDs and DVDs) and polarisation (as seen in LCDs). Both types of effect, if needed, are made by appearance-oriented adjustment of the reflection model.

Though it receives less attention, an understanding of human visual perception is valuable to rendering. This is mainly because image displays and human perception have restricted ranges. A renderer can simulate a wide range of light brightness and color, but current displays – movie screen, computer monitor, etc. – cannot handle so much, and something must be discarded or compressed. Human perception also has limits, and so does not need to be given large-range images to create realism. This can help solve the problem of fitting images into displays, and, furthermore, suggest what short-cuts could be used in the rendering simulation, since certain subtleties won't be noticeable. This related subject is tone mapping.

Mathematics used in rendering includes: linear algebra, calculus, numerical mathematics, signal processing, and Monte Carlo methods.

Rendering for movies often takes place on a network of tightly connected computers known as a render farm.

The current state of the art in 3-D image description for movie creation is the Mental Ray scene description language designed at Mental Images and RenderMan Shading Language designed at Pixar[4] (compare with simpler 3D fileformats such as VRML or APIs such as OpenGL and DirectX tailored for 3D hardware accelerators).

Other renderers (including proprietary ones) can and are sometimes used, but most other renderers tend to miss one or more of the often needed features like good texture filtering, texture caching, programmable shaders, highend geometry types like hair, subdivision or nurbs surfaces with tesselation on demand, geometry caching, raytracing with geometry caching, high quality shadow mapping, speed or patent-free implementations. Other highly sought features these days may include interactive photorealistic rendering (IPR) and hardware rendering/shading.