Tower

Old English torr is from Latin turris via Old French tor. The Latin term together with Greek τύρσις was loaned from a pre-Indo-European Mediterranean language, connected with the Illyrian toponym Βου-δοργίς. With the Lydian toponyms Τύρρα, Τύρσα, it has been connected with the ethnonym Τυρρήνιοι as well as with Tusci (from *Turs-ci), the Greek and Latin names for the Etruscans (Kretschmer Glotta 22, 110ff.)

Towers have been used by mankind since prehistoric times. The oldest known may be the circular stone tower in walls of Neolithic Jericho (8000 BC). Some of the earliest towers were ziggurats, which existed in Sumerian architecture since the 4th millennium BC. The most famous ziggurats include the Sumerian Ziggurat of Ur, built in the 3rd millennium BC, and the Etemenanki, one of the most famous examples of Babylonian architecture.

Some of the earliest surviving examples are the broch structures in northern Scotland, which are conical tower houses. These and other examples from Phoenician and Roman cultures emphasised the use of a tower in fortification and sentinel roles. For example, the name of the Moroccan city of Mogador, founded in the first millennium BC, is derived from the Phoenician word for watchtower ('migdol'). The Romans utilised octagonal towers[1] as elements of Diocletian's Palace in Croatia, which monument dates to approximately 300 AD, while the Servian Walls (4th century BC) and the Aurelian Walls (3rd century AD) featured square ones. The Chinese used towers as integrated elements of the Great Wall of China in 210 BC during the Qin Dynasty. Towers were also an important element of castles.

Eiffel Tower in Paris

Other well known towers include the Leaning Tower of Pisa in Pisa, Italy built from 1173 until 1372, the Two Towers in Bologna, Italy built from 1109 until 1119 and the Towers of Pavia (25 survive), built between 11th and 13th century. The Himalayan Towers are stone towers located chiefly in Tibet built approximately 14th to 15th century. [2]

Up to a certain height, a tower can be made with the supporting structure with parallel sides. However, above a certain height, the compressive load of the material is exceeded, and the tower will fail. This can be avoided if the tower's support structure tapers up the building.

A second limit is that of buckling—the structure requires sufficient stiffness to avoid breaking under the loads it faces, especially those due to winds. Many very tall towers have their support structures at the periphery of the building, which greatly increases the overall stiffness.

A third limit is dynamic; a tower is subject to varying winds, vortex shedding, seismic disturbances etc. These are often dealt with through a combination of simple strength and stiffness, as well as in some cases tuned mass dampers to damp out movements. Varying or tapering the outer aspect of the tower with height avoids vibrations due to vortex shedding occurring along the entire building simultaneously.

Although not correctly defined as towers, many modern high-rise buildings (in particular skyscraper) have 'tower' in their name or are colloquially called 'towers'. Skyscrapers are more properly classified as 'buildings'. In the United Kingdom, tall domestic buildings are referred to as tower blocks. In the United States, the original World Trade Center had the nickname the Twin Towers, a name shared with the Petronas Twin Towers in Kuala Lumpur. In addition some of the structures listed below do not follow the strict criteria used at List of tallest towers.

• Fritz Leonhardt (1989), Towers: a historical survey, Butterworth Architecture, 343 pages.