Did you color your hair, but it came out looking a little too funky? Or perhaps you just want a new look and think a bleached bombshell is what you're after? Either way, you will need to know how to bleach wash your hair. Bleach washing, also known as 'soap capping' or 'bleach bathing', is a gentler way to remove color from your hair. Scroll down to Step 1 to get started!

Part 1
Part 1 of 2:

Making the Bleach Bath

  1. 1
    Do an allergy test. If this is your first time using bleach or doing a bleach test, you should perform an allergy test before covering your whole head in bleach (or else you might have a bad reaction.) Mix up a small amount of equal parts bleach and developer. Take a cotton swab, dip it in the bleach, and rub it on the inside of your elbow. If that area begins to itch, grow patchy, or take on a bright red color, then you are most likely allergic to the bleach and should not use it on your whole head. Monitor the area for 48 hours. If nothing happens then proceed with the bleaching.[1]
    • If your bleach and developer come with instructions on how to perform an allergy test, follow those instructions.
  2. 2
    Pour the shampoo you will be using into a mixing bowl. If possible, use a clarifying shampoo as this sort of shampoo will help you to gauge the strength of the bleach you are using. You should use the amount of shampoo you would normally use when washing your hair.
    • You may want to add a tad bit more in case you need to add a bit more bleach to your hair.
    • Most shampoos are fine to use but do not use a toning shampoo.
    Advertisement
  3. 3
    Mix 1oz (28ml) of bleach and 1oz developer in a second bowl. There are many different types of bleach - cream, oil, liquid, or powder - but it really doesn't matter what kind you use. They all do the same thing in the end.
    • Using a 30 or 40 developer can break or snap re-treated hair, so use with caution! Developer comes in many volumes with lower numbers being weaker and 40 being the strongest.
  4. 4
    Pour everything into one bowl and mix thoroughly. The shampoo--if a clear clarifying one--should turn whatever color the blech is.
    • Add conditioner. This step is optional, but recommended to keep hair healthy. However, do not add conditioner if you are planning on dyeing your hair directly after bleaching it.
  5. Advertisement
Part 2
Part 2 of 2:

Using the Bleach Bath

  1. 1
    Wet your hair with cool water. Plan to bleach your hair when it is damp but not dripping. Run your hair under a cool stream of water (be it in the shower or sink). Once your whole head is wet, towel dry it so that it is damp rather than soaking wet (ie. there should not be water dripping in rivulets off of your head).
    • You can also let your hair air dry for several minutes in combination with towel drying it.
    • Bleach can be applied to wet or dry hair. You should use whatever approach is more consistent with your level of bleaching experience. Your bleach will likely go best if you use a method you are comfortable with.
  2. 2
    Put an old towel around your shoulders. Bleach has a tendency to remove the color from everything (not just your hair but clothing too) so it's important to bleach-proof your work area. Wrap an old towel (one you don't mind discoloring) around your shoulders. To be safe, you may want to wear an old shirt you don't care about as well. Put your latex or rubber gloves on so that the bleach doesn't irritate your skin.
  3. 3
    Apply the bleach wash to your damp hair. You will need to wear latex or rubber gloves for this step. When applying the bleach wash, start at the bottom (or tips) of your hair and work your way up to the roots. Once you have reached the roots, rub the rest of the bleach bath into your hair just like you would rub normal shampoo into your hair while showering.
    • It's okay to apply the mix only to certain spots on your hair (like where the color didn't work out like you wanted it to.)
  4. 4
    Clip your hair up while the bleach processes. Once your hair is clipped up with plastic clips, put a shower cap over it. The shower cap will make the bleach process more quickly, and will also ensure that the bleach doesn't drip everywhere.
  5. 5
    Use a spray bottle and towel to remove a bit of bleach. Spray a small section of the hair with plain water in a spray bottle and wipe a bit of bleach clean with an old towel. Do this every few minutes to keep an eye on how much your hair is lightening. It is important to keep an eye on your bleaching hair or else you may end up with a more intense platinum that the one you were hoping for.
    • For already bleached hair, you may only need 7 - 10 minutes.
    • For removing a dark dye, you may want to process it longer than 10-15 minutes, though it should only be 30 minutes maximum.
    • If you do decide to use 30 or 40 vol - for extra lift or speed - don't let it process longer than 7-10 minutes (depending on your hair color and condition).
  6. 6
    Wash out the solution. Once you have reached the color you were hoping to achieve, its time to wash the bleach out. If you are planning on dyeing your hair after this bleaching process, do not use conditioner while you wash your hair out (some conditioners keep dye from getting absorbed into the hair.) If you are not planning on dyeing your hair, use a deep conditioner to bring some life back to your bleached hair. Wash your hair out as thoroughly as you can.[2]
    • If you're trying to remove hair dye, your hair should look orange or yellowish.
    • If you're trying to remove a toner, it should leave the hair yellow.
  7. Advertisement

Expert Q&A

  • Question
    Can you use bleach on wet hair?
    Laura Martin
    Laura Martin
    Licensed Cosmetologist
    Laura Martin is a Licensed Cosmetologist in Georgia. She has been a hair stylist since 2007 and a cosmetology teacher since 2013.
    Laura Martin
    Licensed Cosmetologist
    Expert Answer
    Wet hair is more fragile than dry hair and for that reason, you shouldn't usually use bleach on it. However, you can do a bleach wash, where you mix lightener with water on wet hair.
  • Question
    What does the shampoo do along with the bleach instead of just using the bleach by itself?
    Ashley Adams
    Ashley Adams
    Professional Hair Stylist
    Ashley Adams is a Licensed Cosmetologist and Hair Stylist in Illinois. She completed her Cosmetology education at John Amico School of Hair Design in 2016.
    Ashley Adams
    Professional Hair Stylist
    Expert Answer
    The shampoo dilutes the bleach, making it less harsh on your hair. It also removes dye, if the hair has been previously colored, and it can be used to freshen up previously bleached hair.
  • Question
    I have completely black hair, and I want to dip-dye it dark purple. I have virgin hair, and I'm unsure if I should go for 20 or 30 volume developer. What are your thoughts?
    Ashley Adams
    Ashley Adams
    Professional Hair Stylist
    Ashley Adams is a Licensed Cosmetologist and Hair Stylist in Illinois. She completed her Cosmetology education at John Amico School of Hair Design in 2016.
    Ashley Adams
    Professional Hair Stylist
    Expert Answer
    Because your hair is so dark, using a purple dye alone may not lift your existing color. So you may need to bleach your hair first, using 20 volume developer.
Advertisement

Warnings

  • Before applying bleach, do a test patch. Doing so will help determine if you're allergic to peroxide or ammonia. If you are allergic and apply the wash anyway, you could have a dangerous reaction.
    ⧼thumbs_response⧽
Advertisement

Things You'll Need

  • 10 vol. or 20 vol. Developer
  • Any Shampoo (non-toning)
  • Conditioner (Optional)
  • Deep Conditioner
  • Hair Bleach (blue or violet)
  • Latex Gloves
  • Non-metal mixing utensil
  • Shower cap (Optional)
  • Two metal-free mixing bowls

About This Article

Ashley Adams
Co-authored by:
Professional Hair Stylist
This article was co-authored by Ashley Adams. Ashley Adams is a Licensed Cosmetologist and Hair Stylist in Illinois. She completed her Cosmetology education at John Amico School of Hair Design in 2016. This article has been viewed 1,862,312 times.
13 votes - 86%
Co-authors: 28
Updated: February 12, 2023
Views: 1,862,312
Article SummaryX

To do a bleach wash on your hair, pour some clarifying shampoo into a bowl and combine 1 ounce (30 mL) each of bleach and developer in a separate bowl. Stir the shampoo into the bleach mixture until they are thoroughly combined. Wet your hair with cool water and towel dry it so it is damp but not dripping. Drape an old towel around your shoulders and put on rubber gloves. Apply the bleach bath to your hair, working from ends to roots. Clip your hair up with plastic clips and cover it with a shower cap. After about 7 to 10 minutes, examine a small section of your hair to see if it’s as light as you want it to be yet. Depending on your hair color and the strength of the bleach, the process may take anywhere from 7 to 30 minutes. Rinse your hair thoroughly when you’re done. If you plan to dye your hair, don’t use conditioner. For advice from our cosmetologist reviewer on what to do if you plan on coloring your hair after you bleach it, read on!

Did this summary help you?
Advertisement