How to Fix a Sagging Couch

Last Updated: September 24, 2022 References

Couches can wear down over time, causing the cushions to sag. You can always throw it out and buy a new couch, or you can save money by fixing it up. You'll need to inspect the couch first, and figure out why it's sagging. It could be a matter of old cushions, or it could be something as complex as a broken frame.

Part 1

Part 1 of 3:

Inspecting the Couch

1
Determine why your couch is sagging. A sagging couch could be the result of worn out cushions, old springs, or a bad frame.^{[1]
X
Research source}
- If the problem is the cushions, you're in for an easy fix. If the cushions seem fine upon inspection, you may have to replace the springs or the frame. Depending on the level of damage you may need to replace the entire couch.^{[2]
  X
  Research source}
2
Take pictures. Before you start taking your couch apart, take some pictures so you have something to refer to. If you can, take the pictures to a local furniture repair shop and see if they can help you determine the problem.

Advertisement
3
Inspect the frame of the sofa. Remove all the sofa cushions and turn the couch over so that you can see the bottom. Look for torn fabric and broken or rotted wood.
- If you see any cracked wood, or wood that is "bowed" out, you'll need to replace it. This will involve taking off most of the upholstery fabric and can be time-consuming.^{[3]
  X
  Research source}
- You may have to remove some of the fabric on the bottom, known as a dust cover, to inspect the springs. Be gentle and take care not to rip the fabric.^{[4]
  X
  Research source}
4
Take note of what kind of springs your couch has. Some couches have zig-zag springs which are also known as "sagless" springs. Other couches use coiled springs.
- Determine whether your springs are bent or broken. If the springs are bent you may be able to fix them yourself. If they're broken you may need to bring your couch to an upholsterer.
- Older couches tend to have coiled springs, while newer couches have zig-zag springs. Your couch may not have springs at all, depending on the quality of the frame.
- Check the space beneath the cushions. You may find that the slats or straps of the couch have snapped.

Part 2

Part 2 of 3:

Filling the Cushions

1
Check the firmness of the cushions. If the cushions feel too soft, then you may need to add more filling. Open up the individual cushion cover and remove the insides.^{[5]
X
Research source}
- This is a good opportunity to wash the cushion covers.
2
Inspect the foam and the batting. Batting is fabric used in upholstery to give the cushions a smooth appearance. It is usually made of cotton or wool, but can also be a blend of materials, including polyester.^{[6]
X
Research source}
- If the foam has noticeable dents in it, you may need to replace the entire cushion. If the batting is worn, but the foam is fine, you can get by with just replacing the batting.^{[7]
  X
  Research source}
3
Replace the foam or the batting. Determine what needs to be replaced in your cushions. You can buy both foam and batting online or at an upholstery supply store.
- When buying new pieces of foam core, make sure to cut them to size to replace the insides.
- You can also stuff your couch cushions with a different material if you prefer. You don't have to use foam. Instead, you can find cotton, down, and even old clothing if you wanted to. The material you use will affect the softness of the couch. Make sure you like the firmness before you stuff every cushion.
- Consider the durability of your materials. Some materials may not hold up well, but foam padding could last you for years to come.
4
Cut the batting into shape and layer it over the cushion filling of your choice. Make sure to use "sheets" of batting. Cut to the seat size, and wrap the cushions a few layers thick. Remember to smooth it over, otherwise you may create a lumpy seat.^{[8]
X
Research source}
5
Replace the cushion covers. Once you've repaired your cushions you can place them back in their covers. Sit on the couch to make sure the cushions were the only issue with the sagging couch. If the couch still sags, inspect the frame again.

Part 3

Part 3 of 3:

Fixing the Frame

1
Check the slats. If the wooden boards that support the couch frame have broken, you will need to replace the wood and screws. Measure the slats and take note of how many you need. You should be able to buy your material at a hardware store.
- If you need to, take a slat for reference to make sure you get exactly what you need.
- You could also place a piece of plywood between the frame and the cushions for added support. This isn't a permanent solution, and it could make the couch a little firmer than you'd like.^{[9]
  X
  Research source}
- Use wood glue to seal the ends. Use a staple gun with long, thick staples, or a hammer and very thin nails, to secure the beam in place.
2
Fix bent springs. If they are twisted or bent, you can fix them by using pliers to bend the springs back into the shape of the other coils.^{[10]
X
Research source}
- If you need to replace the springs, your best bet is to take your couch to a professional furniture repair shop. Replacing springs requires a specialized tool, such as a spring stretcher.^{[11]
  X
  Research source}
3
Remove any broken wood. If the wooden frame is cracked or rotted, you'll need to dismantle the couch and replace the wood. You might find that the wood used to build your couch is plywood. If this is the case, consider replacing it with hardwood.^{[12]
X
Research source}
- Remove any fabric attached to the wood you'll be replacing. Take care not to damage the fabric.^{[13]
  X
  Research source}
- You'll need to remove the springs that are attached to the frame, which will require the use of a special tool. This process can be dangerous, so be careful.^{[14]
  X
  Research source}
- Once the springs and fabric have been safely removed, take the wood off the couch.^{[15]
  X
  Research source}
4
Attach the new wood to the couch. Using a staple gun or a hammer and nails, replace the broken boards with your new wood.^{[16]
X
Research source}
- Secure the board with wood glue and let it dry completely.^{[17]
  X
  Research source}
- Reattach the spring clips to the new wood. This may require the use of a spring stretcher. Secure the clips with new screws.^{[18]
  X
  Research source}
5
Put the upholstery and fabric back on the couch. With the frame replaced, you can go about reattaching the upholstery to the wood. Using a staple gun, pull the fabric tight and staple it to the bottom of the frame.^{[19]
X
Research source}

Community Q&A

Question

How do I size a board to place under the cushions?

Community Answer

Size it so it rests on the wood frame, not just sitting on the springs.
Question

Can I put a piece of board under the cushions to stop the sagging?

Community Answer

Yes, this will provide additional support.
Question

How do I fix a sagging couch?

Community Answer

You can try changing the foam underneath, or check if you have a warranty.