Aluminum foil pipes are commonly used for smoking marijuana or in emergency situations when another pipe is not available or affordable. However, these must be used with caution. Foil pipes are safe for only one or two uses. Over time, they can degrade and become hazardous to your health (though if the crater is small enough for vaping instead of smoking, high burning temperatures are avoided and relative safety achieved). If only using temporarily, however, they're a great item to have when you're in a pinch. If you want to learn how to make your own, just get started with Step 1 below.

Steps

  1. 1
    Get a large square of foil. Take a 12" square piece of tin or aluminum foil (wording varies by region). This should be clean and not degraded by water contact. You will also want to keep it as smooth as possible.
  2. 2
    Fold it in half. Fold the square of foil in half, being careful to keep the foil free of wrinkles and tears.
  3. 3
    Fold it in half again. You will have a square, roughly 6" wide, that is 4 layers thick. The thickness will help keep the pipe from overheating and also make it strong enough so that it isn't crumpled the first time it's used.
  4. 4
    Create a cone. Roll the square into a tube that is slightly flared at one end (like a very narrow cone). The narrow end will be the end you will smoke from. If you want to, use a pencil or barrel of a pen to roll the foil around at the point. This will keep the tube open and give you a nice round opening to smoke out of.[1]
  5. 5
    Find the beginning of the bowl. Measure 1" down from the wider end of the tube. This is the "bowl" end of the pipe.
  6. 6
    Create the bowl. Using a credit card, make a sharp crease at the 1" mark and bend the end up to form the bowl. Be careful not to crumple the tube when you do this. Keeping the pencil in the tube can help.[2]
  7. 7
    Add the smokeable material. Insert smoking material of your choice into bowl. You may or may not way to add an aluminum filter before adding in the material.
    • You can make a quick filter to hold the material in place by taking a very small square, poking hold in it with a needle, and then covering the entrance to the stem of the pipe with it.
  8. 8
    Light it. Apply fire to it and suck out of the other end. Use it just like you'd use any other pipe but remember not to reuse it.

wikiHow Video: How to Make a Bowl (Pipe) out of Aluminum Foil

Quick Summary

Warnings

  • Do not pass this pipe around too quickly, as it will overheat and someone in your group will not be happy. They might even drop the pipe and spill the contents, and then nobody in your group will be happy.
    ⧼thumbs_response⧽
  • Also aluminum foil bowls used in conjunction with gravity bongs for multiple rounds have been witnessed causing a yellow-hazy smoke which has caused vomiting. Be wary of using tin-foil.[3] A suitable substitute is glass.
    ⧼thumbs_response⧽

Things You'll Need

  • 12" square piece of aluminum foil
  • pencil or pen (optional)
  • something to smoke
  • something that makes fire

To make a bowl out of aluminum foil, start with a square piece of foil that’s about 12 x 12 inches (30 x 30 cm). Fold it in half, then fold it in half again. Use a pencil to roll the square into a tube that’s flared at one end. Measure 1 inch (2.5 cm) down from the flared end of the tube, and use a credit card to make a crease at that point. Bend up the flared end to form the bowl, then fill it with your smoking material. To use your bowl, use a lighter to light the smoking material as you inhale the smoke through the opposite end of the foil. To learn how to use a pen or pencil to help you roll a foil pipe, scroll down!

About This Article

Tested by:
wikiHow Video Team
wikiHow is a “wiki,” similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, 31 people, some anonymous, worked to edit and improve it over time. This article has been viewed 1,616,880 times.
45 votes - 86%
Co-authors: 31
Updated: February 3, 2023
Views: 1,616,880
Categories: Pipe Smoking
Article SummaryX

To make a bowl out of aluminum foil, start with a square piece of foil that’s about 12 x 12 inches (30 x 30 cm). Fold it in half, then fold it in half again. Use a pencil to roll the square into a tube that’s flared at one end. Measure 1 inch (2.5 cm) down from the flared end of the tube, and use a credit card to make a crease at that point. Bend up the flared end to form the bowl, then fill it with your smoking material. To use your bowl, use a lighter to light the smoking material as you inhale the smoke through the opposite end of the foil. To learn how to use a pen or pencil to help you roll a foil pipe, scroll down!

Did this summary help you?