How to Make a Cape

A cape can be used for fashion or for costume purposes. It's a fairly straightforward item of clothing that has been used throughout the centuries to add warmth, increase stature or improve appearance. From Red Riding Hood to the catwalk, a cape looks good. This wikiHow will show you a few ways to make a basic cape in various styles.

Method 1
Method 1 of 4:

Making a Basic Cape

  1. Image titled Make a Cape Step 1
    1
    Choose your fabric. Great fabric choices include: cotton, flannel, satin, and wool.[1] You will need fabric for the main, outer part of your cape, and a lighter fabric for the lining. They can be matching colors and patterns, or contrasting ones.
    • Consider using a pattern for one side and a solid color for the other.
    • You can use cotton for both sides of the cape since it is light enough.
  2. Image titled Make a Cape Step 2
    2
    Figure out the neck and length measurements. Measure around the base of your neck. Next, measure down from your shoulder down to where you want the cape to end. Record both of your measurements.[2]
    • For something more cloak-like, measure down to your ankles or mid-calves.
    • For something more like a caplet, measure down to just past your elbows.
    • For a fashion cape, measure from your shoulders down to your knees, since this is probably the most flattering style.
    Advertisement
  3. Image titled Make a Cape Step 3
    3
    Use your neck measurement to figure out the radius. Use a calculator to divide your neck measurement by 2. Divide the answer by pi or 3.14. Round the measurement up to the nearest quarter inch (half centimeter). This is your radius.[3]
  4. Image titled Make a Cape Step 4
    4
    Fold your main fabric into quarters. Begin by folding the fabric in half widthwise. Fold it in half again, also widthwise, to form a square. Rotate the fabric so that the folded corner is in the upper left-hand corner.[4] Don't fold the lining fabric just yet.
  5. Image titled Make a Cape Step 5
    5
    Start drawing the neck part of your pattern. Pin a piece of string to the top-left corner of your fabric, where the folds are. Tie a dressmaker's chalk or pen to the string so that it's the same length as your neck radius. Use the chalk/pen like a compass to draw an arch from the top edge of the fabric over to the left side edge.[5]
  6. Image titled Make a Cape Step 6
    6
    Finish drawing your pattern. Add your radius measurement to your desired length measurement. Lengthen the string according to that new measurement. Draw a second arch to make the bottom of your cape.[6]
  7. Image titled Make a Cape Step 7
    7
    Cut your fabric adding ½-inch (1.27-centimeter) seam allowances. When you are done, fold your lining fabric into fourths, then place your cut fabric on top. Cut your lining using the cut outer fabric as a guide.[7]
  8. Image titled Make a Cape Step 8
    8
    Cut the front of your cape open. Unfold your outer and lining pieces and stack them together. Fold them in half widthwise so that you get a semi-circle. Cut along the left folded edge; leave the other one alone. This will create the opening of your cape.
    • Save a step and stack your fabric together with the right sides facing in.
  9. Image titled Make a Cape Step 9
    9
    Stack and pin your fabric together. Unfold your fabric semi-circles. Stack them together, right sides facing in. Make sure that all of the edges are aligned, then start pinning them together.
  10. Image titled Make a Cape Step 10
    10
    Consider adding a ribbon closure. Cut two 30-inch (76.2-centimeter) long pieces of ribbon. Unpin your cape at the top two corners to either side of the opening. Tuck the ribbons into the cape. Make sure that the ends are aligned with the edges of the cape, then pin them shut. The ribbons should be sandwiched between both layers of fabric.[8]
    • Give your ribbons a nicer finish by sealing the ends with a flame first.
    • Choose a wide ribbon that coordinates with your cape. Something around 2 inches (5.08 centimeters) wide would be ideal.
    • If you don't want a ribbon closure, skip this step.
  11. Image titled Make a Cape Step 11
    11
    Sew the cape using a ½-inch (1.27-centimeter) seam allowance. You want to sew along the inside collar, bottom edge, and the two straight edges. Leave a 4-inch (10.16-centimeter) gap along the bottom of one straight edge for turning.[9] Make you sewing stronger by backstitching at the start and end.
    • If you added a ribbon closure, be careful not to sew across the ribbons!
  12. Image titled Make a Cape Step 12
    12
    Cut notches and slits into the curves, and clip the corners. Cut some notches into the collar, about 1 inch (2.54 centimeters) apart. Cut some slits into the bottom curve, about 1 to 2 inches (2.54 to 5.08 centimeters) apart. At the end, clip the top and bottom corners of your opening. This will help the cape lay smoother.
    • Try to cut as close to the stitching as you can without actually cutting through it.
  13. Image titled Make a Cape Step 13
    13
    Turn the cape inside out, then press it flat with an iron. Use something blunt but pointy, such as a knitting needle, to help fill out the corners. Tuck the raw edges of your turning gap in until they match up with the rest of the cape, and pin them in place. Iron your cape flat.
  14. Image titled Make a Cape Step 14
    14
    Stitch the gap shut. You can do this by hand using a ladder stitch. You can also topstitch all the way around the cape using a matching thread color and a ⅛-inch (0.32-centimeter) seam allowance. Remove the pins when you are done.
  15. Image titled Make a Cape Step 15
    15
    Add a closure if you have not yet already. You can stitch in a clasp-style close, a hook-and-eye-closure, or even a corded frog closure. Choose one that matches the style of your cape the best.
    • If you added a ribbon closure, skip this step.
    16. Advertisement
Method 2
Method 2 of 4:

Making a Hooded Cape

  1. Image titled Make a Cape Step 16
    1
    Choose and buy your fabric. You will need at least 1½ yards (1.4 meters) of fabric. Something cozy, like wool felt, fleece, or flannel, would work best. Keep the fabric folded as it came on the bolt.
    • If you want a longer cape, buy more fabric, but be sure to subtract 24 inches (60.96 centimeters) for the hood and seam allowances.
  2. Image titled Make a Cape Step 17
    2
    Cut off 22 inches (55.88 centimeters) from the side of your fabric. Measure 22 inches (55.88 centimeters) from one of the narrow ends. Cut off the 22-inch (55.88-centimeter) wide rectangle. This will eventually become your hood. Save the big piece for later.
  3. Image titled Make a Cape Step 18
    3
    Cut the hood piece so that it's 17 inches (43.18 centimeters) tall. Take the 22-inch (55.88-centimeter) rectangle you just cut off from your main piece. Turn it so that the folded edge is facing you. Cut it down so that it is 17 inches (43.18 centimeters) tall and 22 inches (55.88 centimeters) wide. Make sure that the 22-inch (55.88-centimeter) edge is along the fold. Discard the little scrap from the top.
  4. Image titled Make a Cape Step 19
    4
    Cut down the cape body, if needed. The big rectangle that's left over will make the main part of your cape. Measure the fabric along the folded edge. If it is too long for your liking, cut it down so that it's the right length. Remember to add 2 inches (5.08 centimeters) for seam allowances.
  5. Image titled Make a Cape Step 20
    5
    Hem the raw edges on your cape. Unfold the cape and turn it so that the wrong sides are facing you. Fold one of the long edges down by ½-inch (1.27-centimeter), and press it flat with an iron. Fold it by another ½-inch (1.27-centimeter), and press it flat again. Topstitch the hem down, ⅛-inch (0.32-centimeter) from the inside fold. Repeat this step for the two side edges.
    • Backstitch at the start and end of your sewing to make your stitches stronger.
  6. Image titled Make a Cape Step 21
    6
    Unfold your hood and hem one of the long edges. Unfold your hood first, and turn it so that the wrong side is facing you. Hem one of the 34-inch (86.36-centimeter) edges the same way you did the cape body. Leave the other three edges alone.
    • The 34-inch (86.36-centimeter) edge is the side that was 17 inches (43.18 centimeters) when folded.
    • Remember to backstitch at the start and end of your sewing.
  7. Image titled Make a Cape Step 22
    7
    Fold the hood, then sew up one of the narrow edges. Fold the hood back in half again, with the wrong side facing out. The 22-inch (55.88-centimeter) edge should be back along the fold, and one of the 17-inch (43.18-centimeter) edges should be hemmed. Sew the other 17-inch (43.18-centimeter) edge using a ½-inch (1.27-centimeter) seam allowance.
    • Remember to backstitch at the start and end of your sewing.
    • If your fabric is fraying a lot, you will need to go over the seams using a serger or zigzag stitch.
  8. Image titled Make a Cape Step 23
    8
    Sew two gathering stitches along the top of your cape. Sew straight or basting stitches along the top, raw edge of your cape. The first one needs to be ¼-inch (0.64-centimeter) from the raw edge, and the second one needs to be ½-inch (1.27-centimeter) from the raw edge.
  9. Image titled Make a Cape Step 24
    9
    Gather the top of your cape until it fits the hood. Find the bobbin threads on one side of your cape. Grab both of them, then start tugging on them. Keep gathering the fabric until it is the same width as your hood base, about 20 inches (50.8 centimeters). Tie off the threads, then snip the excess off.
    • You can gather the fabric from both sides of your cape, but make sure that you are only pulling the bobbin threads.
    • When you are done, take the time to adjust the gathers so that they are even.
  10. Image titled Make a Cape Step 25
    10
    Sew the hood to the cape. Pin the hood and the cape together, right sides touching. Make sure that the raw edge of the hood is aligned with the gathered edge of the cape. Sew the two together using a 1-inch (2.54-centimeter) seam allowance. Make sure that the gathered edges don't fold or bunch up while you sew.
    • Remember to backstitch at the start and end of your sewing.
    • If your fabric frays a lot, you can go over the raw edge with a serger or zigzag stitch. You can also bind the seam with bias tape or hem tape instead.
  11. Image titled Make a Cape Step 26
    11
    Add a clasp or closure. Here is where you can get creative. You can hand-stitch a simple frog closure to the front of your cape. You can also sew on two pieces of ribbons instead, if you prefer to tie the cape shut. Another option would be to add a looped cord on one side of the opening, and a large button on the other.
  12. Image titled Make a Cape Step 27
    12
    Add some finishing touches, if desired. You can consider your cape finished at this point, or you can add some embellishments to make it fancier. Here are some ideas to get you started:
    • Add a beaded fringe along the bottom for a gypsy cape.
    • Iron appliques to added design.
    • Sew on a fake fur trim to the hood fo a cozy cape.
    • Add some embroidery to the edges of your cape to make it fancier.
    13. Advertisement
Method 3
Method 3 of 4:

Making a Kid's Superhero Cape

  1. Image titled Make a Cape Step 28
    1
    Choose your fabric. Since you won't be sewing this, it would be best to use a fabric that does not fray, such as felt or flannel. You will need about 1 yard (0.91 meters) of fabric for this.[10]
    • You can use this method to create an adult-sized cape too, but you will need to use larger measurements.
  2. Image titled Make a Cape Step 29
    2
    Fold the fabric in half lengthwise. Orient the rectangle vertically with one of the narrow edges pointing towards you.
  3. Image titled Make a Cape Step 30
    3
    Draw your side edge. Use a dressmaker's chalk or pen to make a mark along the bottom edge, 11 inches (27.94 centimeters) from the fold. How far down you make it is up to you; the further down it is, the longer the cape will be. Make another mark along the top edge, 5½ inches (13.97 centimeters) from the fold. Connect the lines using a straight edge.[11]
    • If you want a wider cape, and if you have enough fabric, you can make the bottom mark further from the folded edge.
    • For a more accurate length, add 5½ inches (13.97 centimeters) to your cape length. This will account for the neck opening.
  4. Image titled Make a Cape Step 31
    4
    Use a plate or bowl to trace your collar. Find an 8-inch (20.32-centimeter) place or bowl. Place it along the top corner of your folded cloak. The side edge of the plate/bowl should be 4 inches (10.16 centimeters) from the fold. The bottom edge of the plate/bowl should be 5½ inches (13.97 centimeters) down from the top of your fabric. Trace the plate/bowl using a dressmaker's chalk or pen.[12]
  5. Image titled Make a Cape Step 32
    5
    Cut along the lines that you drew. Try to cut just inside the lines. This way, they won't show on your finished cape. You can leave your cap as is, or try one of the variations below for more character:
    • Round the top and bottom corners of your cape for a nicer touch.[13]
    • Add scalloped edge to the bottom of your cape.[14] This is great if your kid wants to be Batman.
    • Cut notches and slits into the bottom edge for a battle-won cape.
  6. Image titled Make a Cape Step 33
    6
    Add some Velcro closures. Get some Velcro squares or cut your own. Secure them to the top two "fingers" of your cape with hot glue or fabric glue. One goes on the top side, and the other goes on the underside.[15] You can also use self-adhesive Velcro.
  7. Image titled Make a Cape Step 34
    7
    Consider adding a superhero emblem appliqué. Iron some fusible web interfacing to a piece of contrasting fabric. Draw and cut out your superhero's emblem. Pin the emblem to the back of the cape. Iron it down, then remove the pins.
    • Each fusible web interfacing will be a little different, so be sure to follow the instruction on yours closely.
    • Alternatively, you can cut the emblem out of felt and glue it to the back of the cape with hot glue or fabric glue.[16]
    8. Advertisement
Method 4
Method 4 of 4:

Making a Kid's Princess Cape

  1. Image titled Make a Cape Step 35
    1
    Choose your fabric. Since you won't be doing any sewing for this, you want to find a fabric that does not fray, such as felt or flannel. Jersey/t-shirt fabric and tulle also make great choices.
    • This will create a child-sized cape. You can use larger measurements to make an adult cape.
  2. Image titled Make a Cape Step 36
    2
    Cut the fabric to length. Measure down from your child's neck down to where you want the cape to end. Add 2 to 3 inches (5.08 to 7.62 centimeters) to your measurement. Cut the fabric according to that measurement.[17] The cape can be as wide as you want it to be.
  3. Image titled Make a Cape Step 37
    3
    Make the casing. Turn the fabric so that the wrong side is facing you. Fold the top edge down by 2 to 3 inches (5.08 to 7.62 centimeters) to make the casing. Secure the bottom edge with fabric glue or iron-on hem tape.[18]
    • Hot glue is not recommended for this because it is not flexible enough to gather.
    • If you do know how to sew, you can sew the casing down, ¼-inch (0.64-centimeter) from the bottom edge.
  4. Image titled Make a Cape Step 38
    4
    Cut a piece of ribbon that's just a little longer than the casing. It can be the same color as the cape, or a contrasting one. Something between 1 and 2 inches (2.54 and 5.08 centimeters) would work best.
    • If you want to tie the ribbon into a bow, cut it twice the length as the casing. You can also use a piece of silver or gold cording instead.
  5. Image titled Make a Cape Step 39
    5
    Pull the ribbon through the casing. Secure a safety pin to one end of the ribbon. Use the safety pin to pull the ribbon through the casing.
  6. Image titled Make a Cape Step 40
    6
    Scrunch the cape to gather it. Slide the cape so that it is centered on the ribbon. Next, scrunch the cape on the ribbon so that it gathers. It should be about half the width it used to be.[19]
  7. Image titled Make a Cape Step 41
    7
    Trim the ribbon down to make the closure. Cut the ribbon down to 3 inches (7.62 centimeters) on each side. Seal the ends with a lighter to keep them from fraying.
    • If you will be tying the ribbon into a bow, skip this step.
  8. Image titled Make a Cape Step 42
    8
    Add Velcro closures to the ribbon. Place one Velcro closure on the front of one ribbon, and the other on the back of the other ribbon. Self-adhesive Velcro would work best. If you can't find any, you can glue on the regular kind with hot glue or fabric glue.
    • Consider hot gluing some pretty rhinestones over the front of one ribbon to make it fancier.
    • If you left the ribbon long, cut the ends at angles, then seal them with a lighter.
    • If you used cording instead of a ribbon, tie a knot into each end of the cord to keep it from fraying.
  9. Image titled Make a Cape Step 43
    9
    Add the finishing touches. You can leave your cape as is, or you can add some finishing touches, such as rhinestones or paint. Use colors that go well with your cape, and remember, less is more. Here are some ideas to get you started:[20]
    • Paint on designs using fabric glue or puff paint. You can free-hand them or use fabric stencils.
    • Use iron-on transfers to add designs to your cape.
    • Glue rhinestones along the edges using fabric glue or hot glue.
    • Use fusible web interfacing to glue appliqués onto the cape.
    • Hot glue a feather boa to the bottom of the cape.
    10. Advertisement

Community Q&A

  • Question
    What waterproof fabrics can I use to make a cape?
    Boy Wonder
    Boy Wonder
    Community Answer
    You can use neoprene, Gore-Tex, lycra, Sunbrella, ripstop, nylon, fleece, tapestry, marine fabric, or furniture fabric.
  • Question
    How can I put a hood on the cape?
    Mia Wu
    Mia Wu
    Community Answer
    First, measure the length around your top of your head, from your shoulder to your top of your head then back your other shoulder. Cut the fabric into a rectangle, add 1 inch, then fold the fabric in half, sew on the long side, not the short side. Flip it over, then lay it down, press down the top. It should look like a house. Sew the short end onto your cloak.
  • Question
    What can I do instead of sewing the hem of my cape?
    Pauline Brown
    Pauline Brown
    Community Answer
    You could either cut the edge of the hem with pinking shears, which prevents the fabric from fraying, or you could use fusible fabric tape, which eliminates the need for sewing.
Advertisement

Warnings

  • If a cape is meant for a child, always make sure that clasps or ties used around the neckline are safe and cannot be a source of choking. The same goes for any wearer, except that clearly older persons are capable of working out for themselves whether or not the neck attachment is unsafe.
    ⧼thumbs_response⧽
Advertisement

Things You'll Need

Making a Basic Cape

  • Outer fabric (i.e.: wool, cotton, flannel, velvet, etc.)
  • Lining fabric (i.e.: cotton, suiting lining, satin, etc.)
  • Dressmaker's chalk or pen
  • Measuring tape
  • Fabric scissors
  • Sewing pins
  • Sewing machine
  • Thread
  • 2-inch (5.08-cenitmeter) wide ribbon (optional)

Making a Hooded Cape

  • Outer fabric (i.e.: wool, cotton, flannel, velvet, etc.)
  • Measuring tape
  • Fabric scissors
  • Sewing pins
  • Sewing machine
  • Thread
  • Closure (i.e.: frog, clasp, ribbon, etc.)

Making a Kid's Superhero Cape

  • No-fray fabric
  • Dressmaker's chalk or pen
  • Fabric scissors
  • Bowl or plate
  • Measuring tape
  • Velcro
  • Coordinating fabric (optional)
  • Fusible web interfacing (optional)
  • Iron (optional)

Making a Kid's Princess Cape

  • No-fray fabric
  • Fabric scissors
  • Ribbon
  • Fabric glue or hem tape
  • Velcro
  • Embellishments

You Might Also Like

How to
Make a Paper Hat
How to
Make a Party Hat
Make Fairy WingsDIY Fairy Wings for Kids & Cosplayers
Make Vampire Fangs
How to
Make Vampire Fangs
How to
Make an Eyepatch
How to
Make a Paper Chef Hat for Kids
How to
Make a Harry Potter Wand
Make Costume Wings
How to
Make Costume Wings
How to
Make a Magic Wand
Make Fake Braces or a Fake RetainerDIY Fake Braces & Retainer: A Step-by-Step Guide
How to
Make a Newspaper Hat
How to
Make a Flower Crown
How to
Make a Cone Hat
Make a Paper Robin Hood Hat
How to
Make a Paper Robin Hood Hat
Advertisement

References

  1. ↑ http://thecottagemama.com/2013/10/free-cape-pattern-tutorial/
  2. ↑ http://thecottagemama.com/2013/10/free-cape-pattern-tutorial/
  3. ↑ http://thecottagemama.com/2013/10/free-cape-pattern-tutorial/
  4. ↑ http://thecottagemama.com/2013/10/free-cape-pattern-tutorial/
  5. ↑ http://thecottagemama.com/2013/10/free-cape-pattern-tutorial/
  6. ↑ http://thecottagemama.com/2013/10/free-cape-pattern-tutorial/
  7. ↑ http://thecottagemama.com/2013/10/free-cape-pattern-tutorial/
  8. ↑ http://thecottagemama.com/2013/10/free-cape-pattern-tutorial/
  9. ↑ http://thecottagemama.com/2013/10/free-cape-pattern-tutorial/
  1. ↑ http://www.makeandtakes.com/no-sew-superhero-cape
  2. ↑ http://howdoesshe.com/how-to-make-a-cape/
  3. ↑ http://howdoesshe.com/how-to-make-a-cape/
  4. ↑ http://howdoesshe.com/how-to-make-a-cape/
  5. ↑ http://www.makeandtakes.com/no-sew-superhero-cape
  6. ↑ http://howdoesshe.com/how-to-make-a-cape/
  7. ↑ http://www.makeandtakes.com/no-sew-superhero-cape
  8. ↑ https://www.halloweenexpress.com/how-to-create-a-no-sew-cape-for-children.php
  9. ↑ https://www.halloweenexpress.com/how-to-create-a-no-sew-cape-for-children.php
  10. ↑ https://www.halloweenexpress.com/how-to-create-a-no-sew-cape-for-children.php
  11. ↑ https://www.halloweenexpress.com/how-to-create-a-no-sew-cape-for-children.php

About This Article

Sherri Miller
Co-authored by:
Sherri Miller
Seamstress & Costume Designer
This article was co-authored by Sherri Miller. Sherri Miller is a Seamstress, Costume Designer, and the Owner of The Scarlett Seam. With more than eight years of experience, she specializes in wedding gown alterations and has extensive knowledge in pattern-making. Sherri received an Associate of Science in Costume Design from Chaffey College. This article has been viewed 790,366 times.
15 votes - 80%
Co-authors: 18
Updated: September 30, 2022
Views: 790,366
Categories: Featured Articles | Costume Accessories
Article SummaryX

Making a no-sew cape is a fun and easy project. To get started, you'll need 2 yards of durable fabric, like felt or flannel, in any color you'd like. If you're making the cape for a child, you only need 1 yard of fabric. Next, fold the fabric in half lengthwise to form a rectangle. Orient the rectangle vertically with one of the narrow edges pointing towards you. Use a dressmaker's chalk or pen to make a mark along the bottom edge of the fabric, about 11 inches (28 cm) from the fold. How far down you make the mark is up to you; the further down it is, the longer the cape will be. Make another mark along the top edge of the fabric, 5½ inches (13.97 centimeters) from the fold. If you want to add more width to the cape, make the bottom mark further from the folded edge. Use a straightedge to connect the 2 lines you drew. To create the neck opening, place an 8-inch (20 cm) plate or bowl on the top corner of your folded cloak. The side edge of the plate/bowl should be 4 inches (10.16 cm) from the fold. The bottom edge of the plate/bowl should be 5½ inches (14 cm) down from the top of your fabric. Trace around the plate or bowl using a dressmaker's chalk or pen. Cut along the lines you drew, aiming to stay just inside the lines so they won’t show on your finished cape. Then secure a Velcro square to each side of the cape’s neck area with hot glue or fabric glue. One square goes on the top side of the fabric, and the other square goes on the underside of the fabric. That way, The Velcro pieces will stick to each other and hold the cape in place around your neck. To learn how to make a hooded cape, scroll down!

Did this summary help you?
Advertisement